journal article·2010-05

Annealing induced interfacial layers in niobium-clad stainless steel developed as a bipolar plate material for polymer electrolyte membrane fuel cell stacks

Sung-Tae Hong, K. Scott Weil, In-Tae Bae, Jung Pyung Choi, Jwo Pan

Journal of Power Sources· Volume 195· Issue 9
Publisher page

Abstract

Abstract Roll-bonded niobium (Nb)-clad 304 L stainless steel (SS) is currently being developed as a metallic bipolar plate material for polymer electrolyte membrane fuel cell stacks. Prior work has shown that post-roll annealing significantly softens the constituent core and cladding materials, enhancing the ductility and formability of each. However under the vacuum annealing condition employed in the previous study (900 s, 982 °C (1800 F)), an interfacial layer was observed to form between the two bonded materials. Subsequent bending and flattening tests indicated brittle failure of this interfacial region under high strain conditions. The present study employs transmission electron microscopy to examine the composition, structure, and thickness of phases generated at the Nb/SS interface as functions of annealing temperature and time. Corresponding selected electron diffraction patterns indicate that above a threshold annealing temperature of ∼950 °C, the formation of (Fe1−xCrx)2Nb appears to control the failure behavior of the Nb/304 L SS material. Annealing treatments conducted below this temperature generally avoid the formation of this intermetallic layer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Evaluation of PEMFC power systems for UPS base station applications10.1016/j.jpowsour.2004.08.033 ↗
2. Review of bipolar plates in PEM fuel cells: flow-field designs10.1016/j.ijhydene.2004.09.019 ↗
3. U.S. Department of Energy, Hydrogen, Fuel Cells & Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan (2003–2010), Available from: http://www.eere.energy.gov/hydrogenandfuelcells/mypp.
4. Bipolar plates for PEM fuel cells: a review10.1016/j.ijhydene.2005.04.016 ↗
5. Graphite bipolar plates for PEM fuel cells
6. Bipolar plate materials development using Fe-based alloys for solid polymer fuel cells10.1016/S0378-7753(97)02774-2 ↗
7. EXAFS and Mössbauer analysis of Pt–Ir catalysts10.1016/0921-4526(89)90254-8 ↗
8. K.S. Weil, J.Y. Kim, G.G. Xia, Z.G. Yang, Clad metal material for PEMFC bipolar plates, U.S. Patent Office, in review.
9. Development of a niobium clad PEM fuel cell bipolar plate material10.1016/j.ijhydene.2006.08.041 ↗
10. Niobium-clad 304L stainless steel PEMFC bipolar plate material: tensile and bend properties10.1016/j.jpowsour.2007.03.032 ↗
11. ASM Handbook, vol. 4, Heat Treating, ASM International Metals Park, Ohio, 2004.
12. ASM Handbook, vol. 13, Corrosion, ASM International Metals Park, Ohio, 2004.
13. Thin intergranular films and solid-state activated sintering in nickel-doped tungsten10.1016/j.actamat.2007.01.017 ↗
14. Cullity · 2001
15. The constitution of the chromium–niobium–molybdenum system10.1016/0022-5088(61)90042-X ↗
16. Effect of iron additions on structure of Laves phases in Nb–Cr–Fe alloys10.1016/0921-5093(93)90495-Z ↗
17. Precipitation of Laves phases from iron–niobium and iron–titanium solid solutions
18. Crystal structure, phase abundance and electrode performance of Laves phase compounds (Zr, A)V0.5Ni1.1Mn0.2Fe0.2 (ATi, Nb or Hf),10.1016/0925-8388(94)01370-5 ↗
19. Phase stability and mechanical behavior of NbCr2-based Laves phases10.1016/S0966-9795(99)00010-2 ↗