journal article·2011-02

A mixture design approach to optimizing the cathodic compositions of proton exchange membrane fuel cell

Jing-Shan Do, Ben-Chiang Liou

Journal of Power Sources· Volume 196· Issue 4
Publisher page

Abstract

Abstract Cathodic catalyst layers for proton exchange membrane fuel cells (PEMFCs) are prepared according to a spraying technique, and the optimal composition of the catalyst layer is investigated by applying a mixture design approach, where the power density of the PEMFC is used as the response of the model. Based on the conventional experimental design, the optimal Nafion content of the electrocatalytic layers of a PEMFC is 35%, and a maximum power density (Pmax) of 239.5 mW cm−2 is attained. Polytetrafluoroethylene (PTFE) is added to the cathodic catalyst layer to manage water, and the relationship between the Pmax of the PEMFC (y) and the cathodic pseudo-compositions (Y1 (Pt/C), Y2 (Nafion) and Y3 (PTFE)) is obtained: y = 204.40 Y 1 + 198.60 Y 2 + 188.44 Y 3 + 167.46 Y 1 Y 2 ( R 2 = 0.9908 ) Based on the constant power density contours of the cathodic compositions, the optimal weight fractions of Pt/C, Nafion and PTFE are 0.68, 0.29 and 0.03, respectively, and the corresponding Pmax is 266.5 mW cm−2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Comparative studies of configurations and preparation methods for direct methanol fuel cell electrodes10.1016/j.electacta.2007.04.120 ↗
2. Ionic conductivity of PEMFC electrodes: effect of Nafion loading10.1149/1.1611493 ↗
3. Determination of ionic resistance and optimal composition in the anodic catalyst layers of DMFC using AC impedance10.1016/j.ijhydene.2005.01.006 ↗
4. Highly-optimized membrane electrode assembly for direct methanol fuel cell prepared by sedimentation method10.1016/j.jpowsour.2004.05.062 ↗
5. Improvement of proton exchange membrane fuel cell electrical performance by optimization of operating parameters and electrodes preparation10.1016/j.jpowsour.2007.05.019 ↗
6. New results of PEFC electrodes produced by the DLR dry preparation technique10.1016/S0378-7753(01)01030-8 ↗
7. Preparation and performance of novel MEA with multi catalyst layer structure for PEFC by magnetron sputter deposition technique10.1016/j.surfcoat.2005.11.119 ↗
8. Preparation of PEM fuel cell electrodes using pulse electrodeposition10.1016/j.jpowsour.2004.06.012 ↗
9. Addition of NH4HCO3 as pore-former in membrane electrode assembly for PEMFC10.1016/j.ijhydene.2006.06.057 ↗
10. Performance of polymer electrolyte membrane fuel cell with thin film catalyst electrode10.1016/S0378-7753(97)02792-4 ↗
11. Effects of membrane electrode assembly preparation on the polymer electrolyte membrane fuel cell performance10.1016/j.electacta.2004.07.017 ↗
12. Novel method for preparation of PEMFC electrodes by the electrospray technique10.1016/j.jpowsour.2005.02.047 ↗
13. Fabrication of polymer electrolyte membrane fuel cell MEAs utilizing inkjet print technology10.1016/j.jpowsour.2007.07.017 ↗
14. Inkjet printing of carbon supported platinum 3-D catalyst layers for use in fuel cells10.1016/j.jpowsour.2007.01.024 ↗
15. Effects of MEA preparation on the performance of a direct methanol fuel cell10.1016/j.jpowsour.2006.02.059 ↗
16. Performance of a direct methanol fuel cell (DMFC) at low temperature: cathode optimization10.1016/j.jpowsour.2006.02.058 ↗
17. High performance membrane-electrode assemblies with ultra-low Pt loading for proton exchange membrane fuel cells10.1016/j.electacta.2004.11.049 ↗
18. Performance of an ultra-low platinum loading membrane electrode assembly prepared by a novel catalyst-sprayed membrane technique10.1016/j.jpowsour.2009.08.037 ↗
19. Fabrication of electrocatalyst layers for direct methanol fuel cells10.1016/j.jpowsour.2004.09.011 ↗
20. Effect of the ionomers in the electrode on the performance of PEMFC under non-humidifying conditions10.1016/j.electacta.2004.01.132 ↗
21. Measurement of proton conductivity in the active layer of PEM fuel cell gas diffusion electrodes10.1016/S0013-4686(98)00128-5 ↗
22. A novel method for the preparation of a PEMFC water management layer10.1016/j.jpowsour.2006.09.095 ↗
23. Thin film electrocatalyst layer for unitized regenerative polymer electrolyte fuel cells10.1016/S0378-7753(02)00466-4 ↗
24. Experimental design and optimization10.1016/S0169-7439(98)00065-3 ↗
25. A mixture design approach to the service life and the oxygen evolving catalytic activity of Ru–Sn–Ti ternary oxide coated electrodes10.1007/BF00707627 ↗
26. Composition optimization and characteristics of PEO-LiCF3SO3-tetraglyme and PEO-LiCF3SO3-tetraglycol polymer electrolytes
27. AC impedance technique in PEM fuel cell diagnosis – a review10.1016/j.ijhydene.2007.05.036 ↗
28. Change of electrochemical impedance spectra (EIS) with time during CO-poisoning of the Pt-anode in a membrane fuel cell10.1016/j.jpowsour.2003.09.031 ↗
29. Improvement of low-humidity performance of PEMFC by addition of hydrophilic SiO2 particles to catalyst layer10.1016/j.jpowsour.2005.11.050 ↗
30. Investigation of self-humidifying anode in polymer electrolyte fuel cells10.1016/j.ijhydene.2006.08.034 ↗
31. High temperature operation of PEMFC: a novel approach using MEA with silica in catalyst layer10.1016/j.ijhydene.2007.09.021 ↗
32. Cormell · 1981
33. Bard · 2001