journal article·2015-11

Effects of cell geometries on performance of tubular solid oxide fuel cell

Daan Cui, Baofeng Tu, Mojie Cheng

Publisher page

Abstract

A two-dimensional model comprising fuel channel, anode, cathode and electrolyte for an anode-supported tubular solid oxide fuel cell (AST-SOFC), has been developed, considering mass and charge transport. By using the model approach, different geometries of the AST-SOFC are proposed and simulated, further analyzing and discussing species transport phenomena and current distribution inside the cell. The results illustrate that effects of current collectors are more remarkable to cell performances for AST-SOFC having a larger current collector than that holding smaller one. The cell with thinner anode is in need of the bigger anode current collecting area to have a high performance. While the cell has the bigger diameter, the current demands the wider path to flow from anode to cathode, thus demanding the thicker anode support for obtaining the higher performance. These calculations can be used to design and optimize the AST-SOFC. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Catalysis and Oxidation Reactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. A review on solid oxide fuel cell models10.1016/j.ijhydene.2011.03.051 ↗
2. A review of modeling and simulation techniques across the length scales for the solid oxide fuel cell10.1016/j.jpowsour.2011.10.010 ↗
3. Effects of operating conditions on the performance of a micro-tubular solid oxide fuel cell (SOFC)10.1016/j.jpowsour.2009.03.049 ↗
4. The influence of current collection on the performance of tubular anode-supported SOFC cells10.1016/j.jpowsour.2007.03.047 ↗
5. Thermal stress modeling of anode supported micro-tubular SOFC10.1016/j.jpowsour.2009.03.046 ↗
6. Current collecting efficiency of micro tubular SOFCs10.1016/j.jpowsour.2006.09.071 ↗
7. Modeling and control of tubular solid-oxide fuel cell systems. I: Physical models and linear model reduction10.1016/j.jpowsour.2010.06.074 ↗
8. Status of tubular SOFC field unit demonstrations10.1016/S0378-7753(99)00413-9 ↗
9. SOFC mathematic model for systems simulations. Part one: from a micro-detailed to macro-black-box model10.1016/j.ijhydene.2004.04.008 ↗
10. Constructal optimization for a single tubular solid oxide fuel cell10.1016/j.jpowsour.2015.03.162 ↗
11. Thermal stresses in an operating micro-tubular solid oxide fuel cell10.1016/j.jpowsour.2009.12.108 ↗
12. Performance comparison of planar, tubular and Delta8 solid oxide fuel cells using a generalized finite volume model10.1016/j.jpowsour.2008.05.046 ↗
13. Micro-tubular solid oxide fuel cells and stacks10.1016/j.jpowsour.2010.09.043 ↗
14. The influence of current collection on the performance of tubular anode-supported SOFC cells10.1016/j.jpowsour.2007.03.047 ↗
15. Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modeling10.1016/j.jpowsour.2007.08.094 ↗
16. Numerical analysis of thermal and electrochemical phenomena for anode supported microtubular SOFC10.1002/aic.11697 ↗
17. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry10.1016/j.jpowsour.2004.01.043 ↗
18. Modeling of solid oxide heat ex-changer integrated stacks and simulation at high fuel utilization10.1149/1.1838904 ↗
19. Cathode-supported tubular solid oxide fuel cell technology: a critical review10.1016/j.jpowsour.2013.03.001 ↗