Improving thermal stability of nanoporous platinum cathode at platinum/yttria-stabilized zirconia interface by oxygen plasma treatment
Source abstract
Abstract
Abstract A short oxygen plasma treatment applied on yttria-stabilized zirconia (YSZ) electrolyte of a solid oxide fuel cell has effectively improved the adhesion between the nanoporous Pt thin film cathode and the YSZ electrolyte, which stabilizes the electrochemically active nanoscale features of Pt at YSZ contact interface. After operating at 450 °C for 10 h, the cell with YSZ surface treated by oxygen plasma has retained 88.2% of the fuel cell current output, and the increase of Rohm is approximately 20% lower in the cell with YSZ than the non-treated YSZ. This is because the ion incorporation reaction sites which usually occurs at Pt/YSZ interface is retained by the preservation of nanoporous Pt features at YSZ contact interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion · Electronic and Structural Properties of Oxides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. High-performance ultrathin solid oxide fuel cells for low-temperature operation10.1149/1.2372592 ↗
2. Atomic layer deposition of yttria-stabilized zirconia for solid oxide fuel cells10.1021/cm070913t ↗
3. Solid oxide fuel cell with corrugated thin film electrolyte10.1021/nl800977z ↗
4. Scalable nanostructured membranes for solid-oxide fuel cells10.1038/nnano.2011.43 ↗
5. A circular membrane for nano thin film micro solid oxide fuel cells with enhanced mechanical stability10.1039/C5EE02328A ↗
6. Three-dimensional nanostructured bilayer solid oxide fuel cell with 1.3 W/cm2 at 450 °C10.1021/nl402661p ↗
7. Thermal stabilities of nanoporous metallic electrodes at elevated temperatures10.1016/j.jpowsour.2007.09.066 ↗
8. Pt/Y0.16Zr0.84O1.92/Pt thin film solid oxide fuel cells: electrode microstructure and stability considerations10.1016/j.jpowsour.2010.10.068 ↗
9. Thermal stability and performance enhancement of nano-porous platinum cathode in solid oxide fuel cells by nanoscale ZrO2 capping10.1016/j.elecom.2015.04.008 ↗
10. Ultrathin YSZ coating on Pt cathode for high thermal stability and enhanced oxygen reduction reaction activity10.1002/aenm.201402251 ↗
11. Enhanced thermal stability of a gadolinia-doped ceria capped metal electrode for durable low-temperature solid oxide fuel cells10.1149/2.0261713jes ↗
12. High-performance silver cathode surface treated with scandia-stabilized zirconia nanoparticles for intermediate temperature solid oxide fuel cells10.1002/aenm.201601956 ↗
13. Sputtered nanoporous PtNi thin film cathodes with improved thermal stability for low temperature solid oxide fuel cells10.1016/j.electacta.2017.07.064 ↗
14. Platinum-based nanocomposite electrodes for low-temperature solid oxide fuel cells with extended lifetime10.1016/j.jpowsour.2015.12.089 ↗
15. The influence of microstructure and functional-grading on the electrochemical response of Pt/Yttria-stabilized zirconia nanocomposite thin films in micro-solid oxide fuel cells10.1016/j.jpowsour.2016.09.052 ↗
16. Hillock formation of Pt thin films on single-crystal yttria-stabilized zirconia10.1103/PhysRevB.85.125408 ↗
17. Agglomeration of Pt thin films on dielectric substrates10.1103/PhysRevB.82.235415 ↗
18. Microscopic and nanoscopic three-phase-boundaries of platinum thin-film electrodes on YSZ electrolyte10.1002/adfm.201001729 ↗
19. Experimental study of single triple-phase-boundary and platinum–yttria stabilized zirconia composite as cathodes for micro-solid oxide fuel cells10.1016/j.jpowsour.2012.01.113 ↗
20. Direct observation of nanoscale Pt electrode agglomeration at the triple phase boundary10.1021/acsami.5b00134 ↗
21. The analysis of oxygen plasma pretreatment for improving anodic bonding10.1149/1.1419187 ↗
22. Studies on surface wettability of poly(dimethyl) siloxane (PDMS) and glass under oxygen-plasma treatment and correlation with bond strength10.1109/JMEMS.2005.844746 ↗
23. Oxygen plasma-treatment effects on Si transfer10.1021/la046795v ↗
24. Effect of oxygen plasma etching on adhesion between polyimide films and metal10.1016/S0040-6090(96)09017-7 ↗
25. Enhanced hydrophilicity and biocompatibility of dental zirconia ceramics by oxygen plasma treatment10.3390/ma8020684 ↗
26. Change in surface properties of zirconia and initial attachment of osteoblastlike cells with hydrophilic treatment10.4012/dmj.2012-069 ↗
27. Theoretical models for surface forces and adhesion and their measurement using atomic force microscopy10.3390/ijms131012773 ↗
28. Direct measurement of adhesion energy of monolayer graphene as-grown on copper and its application to renewable transfer process10.1021/nl204123h ↗
29. Adhesion improvement of graphene/copper interface using UV/ozone treatments10.1016/j.tsf.2015.01.007 ↗
30. A density functional theory study of hydroxyl and the intermediate in the water formation reaction on Pt10.1063/1.1328746 ↗
31. The energy of adsorbed hydroxyl on Pt(111) by microcalorimetry10.1021/jp201632t ↗
32. Bonding mechanism and atomic geometry of an ordered hydroxyl overlayer on Pt(111)10.1021/ja015525l ↗
33. H.J. Kim, J.-G. Yu, S. Hong, C.H. Park, Y.-B. Kim, J. An, Ridge-valley nanostructured samaria-doped ceria interlayer for thermally stable cathode interface in low-temperature solid oxide fuel cell, Phys. Status Solidi (n.d.) n/a-n/a. doi:10.1002/pssa.201700465.10.1002/pssa.201700465 ↗
34. Surface modification of yttria-stabilized zirconia electrolyte by atomic layer deposition10.1021/nl901724j ↗
35. Enhancing oxide ion incorporation kinetics by nanoscale yttria-doped ceria interlayers10.1021/nl104417n ↗
36. Enhanced oxygen exchange on surface-engineered yttria-stabilized zirconia10.1021/nn305122f ↗