journal article·2017-09

Improved electrochemical performances of LiSn2(PO4)3 anode material for lithium-ion battery prepared by solid-state method

Naren, Jianhua Tian, Dongdong Wang, Zhongqiang Shan

Publisher page

Abstract

Abstract The rhombohedral LiSn2(PO4)3 was prepared by solid-state method for the anode material of lithium-ion battery. The effect of pH value of hydrothermal reaction system on the morphology of SnO2 as the precursor of LiSn2(PO4)3 and the influence of heat-treatment procedure and conditions, such as the sintering temperature and time, on the property of LiSn2(PO4)3 were investigated. The purity, morphology, structure and size distribution of prepared LiSn2(PO4)3 were characterized respectively by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM) methods. The results demonstrate that the as-prepared LiSn2(PO4)3 particles exhibit rhombohedral single-crystal structure with an average particle size of 200 nm. The electrochemical measurement results reveal that the as-prepared LiSn2(PO4)3/C electrode exhibits the improved cycling stability and reversibility with a reversible discharge capacity of 448.6 mA h g−1 at 100 mA g−1 and better rate capability of 332.6 mA h g−1 at 500 mA g−1. The charge-discharge mechanism of LiSn2(PO4)3/C electrode was also investigated. According to the test results of cyclic voltammetry, the electrode process includes not only the intercalation and deintercalation of lithium ions in the LiSn2(PO4)3 particles, but also the surface pseudo-capacitive effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Rational material design for ultrafast rechargeable lithium battery10.1039/C4CS00442F ↗
2. Review-understanding and mitigating some of the key factors that limit non-aqueous lithium-air battery performance10.1149/2.0061514jes ↗
3. Review-advances in anode and electrolyte materials for the progress of lithium-ion and beyond lithium-ion batteries10.1149/2.0191514jes ↗
4. SnO2 quantum Dots@Graphene oxide as a high-rate and long-life anode material for lithium-ion batteries10.1002/smll.201502183 ↗
5. Watermelon-inspired Si/C microspheres with hierarchical buffer structures for densely compacted lithium-ion battery anodes
6. Rutile TiO2 submicroboxes with superior lithium storage properties10.1002/anie.201411353 ↗
7. Large-scale low temperature fabrication of SnO2 hollow-nanoporous nanostructures the template-engaged replacement reaction mechanism and high-rate lithium storage10.1039/C4NR03395G ↗
8. Irradiated graphene loaded with SnO2 quantum dots for energy storage
9. Electrochemical and in situ X-ray diffraction studies of the reaction of lithium with tin oxide composites10.1149/1.1837740 ↗
10. A novel method to synthesize SnP2O7 spherical particles for lithium-ion battery anode10.1007/s11581-016-1773-3 ↗
11. Carbon-coated macroporous Sn2P2O7 as anode materials for Li-Ion battery
12. Synthesis and electrochemical characteristics of NASICON-structured LiSn2(PO4)3 anode material for lithium-ion batteries10.1016/j.jpowsour.2012.05.117 ↗
13. Influence of structure and composition upon performance of tin phosphate based negative electrodes for lithium batteries10.1016/S0013-4686(02)00017-8 ↗
14. Electrochemical, spectroscopic, and thermal investigations of LiSn2(PO4)3 and Sn3(PO4)2 anodes during the first discharge10.1149/1.1914753 ↗
15. The design of a LiFePO4/carbon nanocomposite with a core-shell structure and its synthesis by an in situ polymerization restriction method10.1002/anie.200802539 ↗
16. Nasicon-Structured LiGe2(PO4)3 with improved cyclability for high-performance lithium batteries
17. Nasicon-Structured NaSn2(PO4)3with excellent high-rate properties as anode material for lithium ion batteries10.1021/acs.chemmater.5b02471 ↗
18. Study on solid-electrolyte-interphase of Si and C-Coated Si electrodes in lithium cells10.1149/1.3032230 ↗
19. Formation process of LiSn2(PO4)3 a monoclinically distorted NASICON-type structure10.1021/cm00046a036 ↗
20. The martensitic nature of the transition monoclinic⇌rhombohedral of LiSn2(PO4)310.1007/BF00736216 ↗
21. Reversible monoclinic-rhombohedral transformation in LiSn2(PO4)3 with NASICON-type structure10.1021/cm00058a016 ↗
22. Effects of sintering temperature on the structure and conductivity of LiSn2P3O12 prepared by mechanical milling method10.4028/www.scientific.net/AMR.129-131.338 ↗
23. Low-temperature Triclinic distortion in NASICON-type LiSn2(PO4)310.1006/jssc.1997.7397 ↗
24. Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity10.1351/pac198557040603 ↗
25. Synthesis of hierarchical worm-like SnO2@C aggregates and their enhanced lithium storage properties10.1016/j.jallcom.2014.08.176 ↗
26. Dually fixed SnO2 nanoparticles on graphene nanosheets by polyaniline coating for superior lithium storage10.1021/am506818h ↗
27. Studies on the anode-electrolyte interface in lithium ion batteries
28. Single-crystalline LiMn2O4 Nanotubes synthesized via template-engaged reaction as cathodes for high-power lithium ion batteries10.1002/adfm.201001448 ↗
29. Studies on the anode-electrolyte interface in lithium ion batteries
30. Relationship between activation energy and bottleneck size for Li+ ion conduction in NASICON materials of composition LiMM'(PO4)3; M,M'=Ge, Ti, Sn, Hf10.1021/jp973296c ↗
31. Carbon encapsulated ultrasmall SnO2 nanoparticles anchoring on graphene/TiO2 nanoscrolls for lithium storage10.1016/j.electacta.2014.09.109 ↗
32. Tin oxide-titanium oxide/graphene composited as anode materials for lithium-ion batteries10.1007/s10008-014-2555-3 ↗
33. Bowl-like SnO2@carbon hollow particles as an advanced anode material for lithium-ion batteries10.1002/anie.201407917 ↗
34. Enhanced lithium storage performance in three-dimensional porous SnO2-Fe2O3 composite anode films10.1016/j.electacta.2014.05.073 ↗
35. Controllable synthesis of SnO2@C yolk–shell nanospheres as a high-performance anode material for lithium ion batteries10.1039/C3NR06452B ↗
36. Improving the electrochemical performance of the LiNi0.5Mn1.5O4 spinel by polypyrrole coating as a cathode material for the lithium-ion battery10.1039/C4TA04018J ↗
37. A high-energy lithium-ion capacitor by integration of a 3D interconnected titanium carbide Nanoparticle chain anode with a pyridine-derived porous Nitrogen-doped carbon cathode10.1002/adfm.201505240 ↗