Gas selectivity measurements as a diagnostic tool for fuel cells
Source abstract
Abstract
Abstract In this study, gas permeability and selectivity measurements are used to identify when membrane thinning or integrity failures have occurred in a fuel cell membrane electrode assembly and hence be used as a tool to identify when chemical or mechanical degradation is the dominant mode of failure. A fuel cell was operated at open circuit voltage conditions and the permeability of five different gasses (H 2 , He, N 2 , O 2 , Ar) were measured periodically. The results showed that through a fresh MEA the gasses permeated via a solution diffusion type mechanism though after 150 h of degradation the permeation behaviour changed to Knudsen diffusion mechanism. This was interpreted to indicate that an integrity failure had occurred in the ionomer membrane. Voltage data also shows an increase in voltage degradation rate after 150 h and a drop in polarization performance. Furthermore, there was an increase in fluoride emission rate. Analysis of the de-catalyzed membrane after degradation revealed rips and tears in the ionomer membrane and no significant thickness changes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. LaConti · 2003 · vol. 3 · 647
2. Kundu · J. Power Sources · 2006 · 157 · 65010.1016/j.jpowsour.2005.12.027 ↗
3. Guo · J. Power Sources · 2006 · 160 · 126910.1016/j.jpowsour.2006.02.093 ↗
4. Endoh · Electrochem. Solid-State Lett. · 2004 · 7 · A20910.1149/1.1739314 ↗
5. St Pierre · J. New Mater. Electrochem. Syst. · 2000 · 3 · 99
6. Mathias · Electrochem. Soc. Interface · 2005 · 14 · 2410.1149/2.F05053IF ↗
7. Healy · Fuel Cells · 2005 · 5 · 30210.1002/fuce.200400050 ↗
8. Kinumoto · J. Power Sources · 2006 · 158 · 122210.1016/j.jpowsour.2005.10.043 ↗
9. Kundu · Polymer · 2005 · 46 · 1170710.1016/j.polymer.2005.09.059 ↗
10. Tang · J. Fuel Cell Sci. Technol. · 2006 · 3 · 11910.1115/1.2173666 ↗
11. Liu · ECS Trans. · 2006 · 3 · 49310.1149/1.2356171 ↗
12. Ohma · ECS Trans. · 2006 · 3 · 51910.1149/1.2356173 ↗
13. Inaba · 2005 · 395
14. Paik · 2005 · 771
15. Kundu · Polym. Degrad. Stab. · 2008 · 93 · 21410.1016/j.polymdegradstab.2007.10.001 ↗
16. Cheng · J. Power Sources · 2007 · 167 · 2510.1016/j.jpowsour.2007.02.027 ↗
17. Pandey · Prog. Polym. Sci. · 2001 · 26 · 85310.1016/S0079-6700(01)00009-0 ↗
18. Chiou · Ind. Eng. Chem. Res. · 1988 · 27 · 216110.1021/ie00083a034 ↗
19. Takahashi · J. Appl. Polym. Sci. · 2001 · 82 · 20610.1002/app.1840 ↗
20. Benjelloun-Dabaghi · Oil Gas Sci. Technol. · 2001 · 56 · 29510.2516/ogst:2001025 ↗
21. Yaroshehuk · J. Membr. Sci. · 1995 · 101 · 8310.1016/0376-7388(94)00277-6 ↗