journal article·2017-12

Modeling electrochemical resistance with coal surface properties in a direct carbon fuel cell based on molten carbonate

Seongyong Eom, Seongyool Ahn, Kijoong Kang, Gyungmin Choi

Publisher page

Abstract

Abstract In this study, a numerical model of activation and ohmic polarization is modified, taking into account the correlation function between surface properties and inner resistance. To investigate the correlation function, the surface properties of coal are changed by acid treatment, and the correlations between the inner resistance measured by half-cell tests and the surface characteristics are analyzed. A comparison between the model and experimental results demonstrates that the absolute average deviations for each fuel are less than 10%. The numerical results show that the sensitivities of the coal surface properties affecting polarization losses change depending on the operating temperature. The surface oxygen concentrations affect the activation polarization and the sensitivity decreased with increasing temperature. The surface ash of coal is an additional index to be considered along with ohmic polarization and it has the greatest effect on the surface properties at 973 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. A comprehensive review of direct carbon fuel cell technology10.1016/j.pecs.2012.01.003 ↗
2. 2-D numerical modeling and experimental investigation of electrochemical mechanisms coupled with heat and mass transfer in a planar direct carbon fuel cell10.1016/j.jpowsour.2013.09.024 ↗
3. Electrochemical oxidation of graphite in an intermediate temperature direct carbon fuel cell based on two-phases electrolyte10.1016/j.ijhydene.2012.11.070 ↗
4. Application of refuse fuels in a direct carbon fuel cell system10.1016/j.energy.2012.12.025 ↗
5. Simulation of a fluidized bed electrode direct carbon fuel cell10.1016/j.ijhydene.2014.12.090 ↗
6. Modeling and simulation of a single direct carbon fuel cell10.1016/j.jpowsour.2008.08.100 ↗
7. A carbon in molten carbonate anode model for a direct carbon fuel cell10.1016/j.electacta.2009.11.015 ↗
8. Modeling of experimental results for carbon utilization in a carbon fuel cell10.1016/j.jpowsour.2012.11.073 ↗
9. Performance analysis of a direct carbon fuel cell with molten carbonate electrolyte10.1016/j.energy.2014.02.049 ↗
10. Modeling of direct carbon solid oxide fuel cell for CO and electricity cogeneration10.1016/j.apenergy.2016.06.064 ↗
11. Electrochemical gas-electricity cogeneration through direct carbon solid oxide fuel cells10.1016/j.jpowsour.2014.12.016 ↗
12. The thermal effect in direct carbon solid oxide fuel cells10.1016/j.applthermaleng.2017.03.027 ↗
13. Modeling of direct carbon solid oxide fuel cells with H2O and CO2 as gasification agents10.1016/j.ijhydene.2017.05.075 ↗
14. Analytical modeling of electrochemical mechanisms in CO2 and CO/CO2 producing direct carbon fuel cell10.1016/j.jelechem.2012.01.010 ↗
15. Anode modeling of a molten-carbonate based direct carbon fuel cell10.1016/j.jpowsour.2017.03.078 ↗
16. Experimental characterization and elementary reaction modeling of solid oxide electrolyte direct carbon fuel cell10.1016/j.jpowsour.2013.05.149 ↗
17. Using potassium catalytic gasification to improve the performance of solid oxide direct carbon fuel cells: experimental characterization and elementary reaction modeling10.1016/j.jpowsour.2013.12.021 ↗
18. Enhancing triple-phase boundary at fuel electrode of direct carbon fuel cell using a fuel-filled ceria-coated porous anode10.1016/j.ijhydene.2014.08.028 ↗
19. Thermal decomposition of alkane hydrocarbons inside a porous Ni anode for fuel supply of direct carbon fuel cell: effects of morphology and crystallinity of carbon10.1016/j.jpowsour.2015.06.079 ↗
20. On-demand supply of slurry fuels to a porous anode of a direct carbon fuel cell: attempts to increase fuel-anode contact and realize long-term operation10.1016/j.jpowsour.2016.01.080 ↗
21. Comparison of the electrochemical reaction parameter of graphite and sub-bituminous coal in a direct carbon fuel cell10.1021/acs.energyfuels.5b02904 ↗
22. Investigation of chemical and electrochemical reactions mechanisms in a direct carbon fuel cell using olive wood charcoal as sustainable fuel10.1016/j.jpowsour.2015.01.171 ↗
23. Investigation of chemical and electrochemical reactions mechanisms in a direct carbon fuel cell using olive wood charcoal as sustainable fuel10.1021/ie800891m ↗
24. Influence of devolatilized gases composition from raw coal fuel in the lab scale DCFC (direct carbon fuel cell) system10.1016/j.energy.2014.07.039 ↗
25. Effect of coal based pyrolysis gases on the performance of solid oxide direct carbon fuel cells10.1016/j.ijhydene.2014.08.133 ↗
26. Direct conversion of carbon fuels in a molten carbonate fuel cell10.1149/1.1836129 ↗
27. Estimating thermodynamic properties of coal, char, tar and ash10.1016/0378-3820(80)90022-3 ↗
28. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling10.1016/S0378-7753(02)00277-X ↗
29. Analytical modeling of polarizations in a solid oxide fuel cell using biomass syngas product as fuel10.1016/j.applthermaleng.2006.10.011 ↗
30. Exchange current density of SOFC electrodes: theoretical relations and partial pressure dependencies rate-determined by electrochemical reactions10.1149/2.0561501jes ↗
31. Energy and exergy analysis of simple solid-oxide fuel-cell power systems10.1016/S0378-7753(01)00842-4 ↗
32. Gas electrode reactions in molten carbonate media part v. electrochemical analysis of the oxygen reduction mechanism at a fully immersed gold electrode10.1149/1.2054895 ↗
33. Reduction of oxygen in alkali carbonate melts10.1016/S0022-0728(77)80176-9 ↗
34. On modelling molten carbonate fuel-cell cathodes by electrochemical potentials10.1023/A:1004003022974 ↗
35. Polarization of the molten carbonate fuel cell anode and cathode10.1149/1.2116020 ↗
36. Lide · 2010
37. Concentration polarisation in heterogeneous electrochemical reactions: a consistent kinetic evaluation and its application to molten carbonate fuel cells10.1016/S0378-7753(02)00729-2 ↗
38. Correlations between electrochemical resistances and surface properties of acid-treated fuel in coal fuel cells10.1016/j.energy.2017.09.034 ↗
39. Influence of selected coal contaminants on graphitic carbon electro-oxidation for application to the direct carbon fuel cell10.1016/j.jpowsour.2014.03.026 ↗
40. Thirteen ways to look at the correlation coefficient10.1080/00031305.1988.10475524 ↗
41. Decomposition of Li2CO3 by interaction with SiO2 in mold flux of steel continuous casting10.2355/isijinternational.44.334 ↗
42. Thermodynamic analysis of gasification-driven direct carbon fuel cells10.1016/j.jpowsour.2009.05.039 ↗
43. Gas electrode reactions in molten carbonate media: Part III. Temperature dependence of oxygen reduction kinetics in (Li+K)CO3 eutectic10.1016/0022-0728(86)80191-7 ↗
44. Impact of gas products around the anode on the performance of a direct carbon fuel cell using a carbon/carbonate slurry10.1016/j.jpowsour.2016.08.122 ↗
45. Surface modification of carbon fuels for direct carbon fuel cells10.1016/j.jpowsour.2008.09.070 ↗
46. Achieving high performance in intermediate temperature direct carbon fuel cells with renewable carbon as a fuel source10.1016/j.apenergy.2014.08.055 ↗
47. A new cathode for reduced-temperature molten carbonate fuel cells10.1149/2.0741414jes ↗