journal article·2017-09

A conceptual design of catalytic gasification fuel cell hybrid power plant with oxygen transfer membrane

Wangying Shi, Minfang Han

Publisher page

Abstract

Abstract A hybrid power generation system integrating catalytic gasification, solid oxide fuel cell (SOFC), oxygen transfer membrane (OTM) and gas turbine (GT) is established and system energy analysis is performed. In this work, the catalytic gasifier uses steam, recycled anode off-gas and pure oxygen from OTM system to gasify coal, and heated by hot cathode off-gas at the same time. A zero-dimension SOFC model is applied and verified by fitting experimental data. Thermodynamic analysis is performed to investigate the integrated system performance, and system sensitivities on anode off-gas back flow ratio, SOFC fuel utilization, temperature and pressure are discussed. Main conclusions are as follows: (1) System overall electricity efficiency reaches 60.7%(HHV) while the gasifier operates at 700 °C and SOFC at 850 °C with system pressure at 3.04 bar; (2) oxygen enriched combustion simplify the carbon-dioxide capture process, which derives CO 2 of 99.2% purity, but results in a penalty of 6.7% on system electricity efficiency; (3) with SOFC fuel utilization or temperature increasing, the power output of SOFC increases while GT power output decreases, and increasing system pressure can improve both the performance of SOFC and GT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. US DOE Report · 2011
2. Singhal · 2003
3. Theoretical basis and performance optimization analysis of a solid oxide fuel cell–gas turbine hybrid system with fuel reforming[J]10.1016/j.enconman.2014.06.068 ↗
4. Simulation and exergy analysis of a hybrid solid oxide fuel cell (SOFC)–gas turbine system[J]10.1016/j.energy.2006.03.006 ↗
5. Prospects for advanced coal-fuelled fuel cell power plants[J]10.1016/0378-7753(93)01807-T ↗
6. High efficiency coal-fired power plant of the future[J]10.1016/S0196-8904(96)00210-5 ↗
7. The feasibility of a coal gasifier combined with a high-temperature fuel cell[J]10.1016/j.cej.2003.12.005 ↗
8. Combination of thermochemical recuperative coal gasification cycle and fuel cell for power generation[J]10.1016/j.fuel.2004.08.024 ↗
9. Design of highly efficient coal-based integrated gasification fuel cell power plants[J]10.1016/j.jpowsour.2010.03.045 ↗
10. Energy and economic performance of novel integrated gasifier fuel cell (IGFC) cycles with carbon capture[J]10.1016/j.ijggc.2014.04.028 ↗
11. Prospects for advanced coal-fuelled fuel cell power plants[J]10.1016/0378-7753(93)01807-T ↗
12. Sensitivity analysis of a Vision 21 coal based zero emission power plant[J]10.1016/j.jpowsour.2005.09.015 ↗
13. Dry gas cleaning in coal gasification systems for fuel cells using composite sorbents[J]10.1016/j.powtec.2007.03.013 ↗
14. Dry gas cleaning process by adsorption of H2S into activated cokes in gasification of carbon resources[J]10.1016/j.fuel.2009.04.005 ↗
15. Conceptual design of light integrated gasification fuel cell based on thermodynamic process simulation[J]10.1016/j.apenergy.2015.03.012 ↗
16. A review on modeling of hybrid solid oxide fuel cell systems[J]
17. Thermo-economic optimization of an indirectly coupled solid oxide fuel cell/gas turbine hybrid power plant10.1016/j.ijhydene.2010.10.089 ↗
18. Modeling and control of a SOFC–GT-based autonomous power system10.1016/j.energy.2006.07.034 ↗
19. SOFC and MCFC: commonalities and opportunities for integrated research10.1016/j.ijhydene.2010.09.071 ↗
20. A review of integration strategies for solid oxide fuel cells10.1016/j.jpowsour.2009.07.045 ↗
21. Single-level optimization of a hybrid SOFC GT power plant10.1016/j.jpowsour.2005.11.108 ↗
22. Comparison between pressurized design and ambient pressure design of hybrid solid oxide fuel cell–gas turbine systems[J]10.1016/j.jpowsour.2006.09.036 ↗
23. Exergy and economic analyses of advanced IGCC–CCS and IGFC–CCS power plants[J]10.1016/j.apenergy.2013.02.006 ↗
24. Exergy and economic analysis of a CaO-looping gasifier for IGFC–CCS and IGCC–CCS[J]10.1016/j.apenergy.2014.04.065 ↗
25. Coal gasification integration with solid oxide fuel cell and chemical looping combustion for high-efficiency power generation with inherent CO2 capture[J]10.1016/j.apenergy.2015.01.100 ↗
26. Economic assessment of integrated coal gasification combined cycle with sorbent CO2 capture[J]10.1016/j.apenergy.2016.02.035 ↗
27. Some technical issues of zero-emission coal technology[J]10.1016/j.ijhydene.2005.08.012 ↗
28. Integrated gasification fuel cell performance and cost assessment[J]
29. Catalytic coal gasification: an emerging technology[J]10.1126/science.215.4529.121 ↗
30. Catalytic gasification of coal using eutectic salts: identification of eutectics[J]10.1016/S0008-6223(02)00310-X ↗
31. Exxon catalytic coal gasification process: fundamentals to flowsheets[J]10.1016/0016-2361(83)90207-7 ↗
32. Catalytic gasification of coal using eutectic salts: identification of eutectics[J]10.1016/S0008-6223(02)00310-X ↗
33. Thermodynamic assessment of IGCC power plants with hot fuel gas desulfurization[J]10.1016/j.apenergy.2010.05.020 ↗
34. Fundamentals of electro-and thermochemistry in the anode of solid-oxide fuel cells with hydrocarbon and syngas fuels[J]10.1016/j.pecs.2013.10.001 ↗
35. Electrochemical oxidation of H2, CO, and CO/H2 mixtures on patterned Ni anodes on YSZ electrolytes[J]10.1149/1.2170577 ↗
36. Effects of temperature and pressure on the performance of a solid oxide fuel cell running on steam reformate of kerosene[J]10.1016/j.jpowsour.2012.11.136 ↗
37. Mixed ionic–electronic conducting (MIEC) ceramic-based membranes for oxygen separation[J]10.1016/j.memsci.2008.03.074 ↗
38. A review of mixed ionic and electronic conducting ceramic membranes as oxygen sources for high-temperature reactors[J]
39. Li · 2007
40. Mixed ionic–electronic conducting (MIEC) ceramic-based membranes for oxygen separation[J]10.1016/j.memsci.2008.03.074 ↗
41. Verification of analytical fuel cell models by performance testing at a 110 cm2 molten carbonate fuel cell[J]10.1149/1.1396335 ↗
42. Design and partial load exergy analysis of hybrid SOFC–GT power plant[J]10.1016/j.jpowsour.2005.07.088 ↗
43. A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness[J]10.1016/S0378-7753(00)00556-5 ↗
44. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry[J]10.1016/j.jpowsour.2004.01.043 ↗
45. Modelling and performance evaluation of solid oxide fuel cell for building integrated Co-and polygeneration[J]10.1002/fuce.200900082 ↗
46. O'hayre · 2016
47. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modelling[J]10.1016/S0378-7753(02)00277-X ↗
48. Analysis and optimization of a solid oxide fuel cell and intercooled gas turbine (SOFC–ICGT) hybrid cycle[J]10.1016/j.jpowsour.2003.08.035 ↗
49. A finite volume SOFC model for coal-based integrated gasification fuel cell systems analysis[J]10.1115/1.4000687 ↗
50. Performance analysis of integrated biomass gasification fuel cell (BGFC) and biomass gasification combined cycle (BGCC) systems[J]10.1016/j.ces.2009.11.022 ↗
51. A review of efficiency penalty in a coal-fired power plant with post-combustion CO2 capture[J]10.1016/j.apenergy.2013.05.020 ↗
52. Coal · 2010
53. Engineering and economic analyses of a coal-fueled solid oxide fuel cell hybrid power plant[C]//ASME Turbo Expo 2005: power for Land, Sea, and Air
54. Design of highly efficient coal-based integrated gasification fuel cell power plants[J]10.1016/j.jpowsour.2010.03.045 ↗
55. Integrating IT-SOFC and gasification combined cycle with methanation reactor and hydrogen firing for near zero-emission power generation from coal[J]10.1016/j.egypro.2011.01.170 ↗