journal article·2004-11

Studies of 18650 cylindrical cells made with doped LiNiO2 positive electrodes for military applications

Jiang Fan

Journal of Power Sources· Volume 138· Issue 1-2
Publisher page

Abstract

Abstract We studied GP 18650 cylindrical cells made with doped LiNiO 2 positive electrode for military application. The studied cells should deliver about 184 Wh/kg according to the military specification MIL-PRF-320521 while it delivers about 201 Wh/kg according to the general commercial standard. The difference in the cell specific energy is mainly caused by the difference in the charging voltage. It is 4.1 V in the military specification compared to 4.2 V in the general commercial standard. Clearly, to take full advantage of the commercial lithium-ion cell, either the military increases the voltage limit to 4.2 V from 4.1 V or the cell manufacturers redesign their cells according to the 4.1 V charging voltage limit. The studied cell exceeds all major military requirements including high rate discharging, high current pulse discharging, low temperature discharging, cycle life, high temperature storage, and abuse tolerances such as the overcharging, forced discharging, and external short. Specifically, the capacity of the cell exceeds the requirement by 51% at a high discharging rate (3.3 A) and by 39% with a high current (6 A) pulse. The cell can discharge not only ∼62% of the expected capacity at −30 °C but also ∼47% at −40 °C and at 0.67 A, which means that the military can extend their specification to −40 °C. The cell still retained 1.97 Ah (or 92%) after 224 cycles, which exceeds the requirement by ∼9%. The cell retained 1.95 Ah (or 95%) after one-week storage at 50 °C and at 4.1 V, which exceeds the requirement by 8%. The abuse tolerance is also very high. The maximum cell temperature ranged only from 62 to 70 °C during overcharging, external short, and forced discharging. Directions for the improvement are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Technologies Research · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. G. Au, L. Cristo, D. Bennington, A. Pellegrino, Overcharge and Characteristic of BB-2590 Lithium Ion Battery, in: Proceedings of the IEEE 17th Annual Battery Conference on Applications and Advances, Long Beach, CA, January 2002.10.1109/BCAA.2002.986370 ↗
2. E.J. Plichta, M.A. Hendrickson, R.P. Hamlen, Mobile Power Challenges for the Army’s Objective Force, in: Proceedings of the IEEE 17th Annual Battery Conference on Applications and Advances, Long Beach, CA, January 2002.10.1109/BCAA.2002.986380 ↗
3. Hamlen · J. Power Sources · 2001 · 97–98 · 2210.1016/S0378-7753(01)00582-1 ↗
4. C.J. Govar, J.A. Banner, Safety Testing of Batteries for Navy Devices Using Lithium Ion Technology, in: Proceedings of the IEEE 17th Annual Battery Conference on Applications and Advances, Long Beach, CA, January 2002.10.1109/BCAA.2002.986395 ↗
5. D. Goodwin, D. Gale, R. Neat, W. Macklin, A. Jeffery, The Design of Smart Li-ion Batteries for Military Applications, in: Proceedings of Conference on 39th Power Sources, Cherry Hill, USA, June 2000, p. 156.
6. Ritchie · J. Power Sources · 2001 · 96 · 110.1016/S0378-7753(00)00673-X ↗
7. MIL-32052/1(CR).
8. UL 1642 Standard, 1999.
9. Fan · IEEE Aerosp. Electron. Syst. Mag · 2002 · 17 · 7
10. Sit · J. Power Sources · 2004 · 125 · 12410.1016/S0378-7753(03)00833-4 ↗