Electrochemical oxidation of 1-methoxy-2-propanol in direct liquid fuel cells
Source abstract
Abstract
Abstract Some interesting features have been observed when 1-methoxy-2-propanol was studied in direct liquid fuel cells. Air flow rate ranging from 180 to 920 ml/min had no effect on performance, but the performance increased largely when the cell temperature was increased from 40, to 60, and then to 80 °C. The open circuit voltage of the cell was around 0.70 V, which was 0.08–0.33 V higher than that when methanol was used. At low air flow rates, 1-methoxy-2-propanol performed much better than methanol in the entire current density region at 60 and 80 °C. At high air flow rates, methanol performed better than 1-methoxy-2-propanol at current densities higher than 100 mA/cm 2 , but the latter performed better than the former at current densities less than ca. 50 mA/cm 2 . The crossover current density of 1.0 M 1-methoxy-2-propanol through a Nafion ® 112 membrane was estimated electrochemically, and it was 25.6, 60.8 and 96.0 mA/cm 2 at cell temperatures of 40, 60, and 80 °C, respectively, measured at 0.90 V. These numbers were much smaller than those of methanol that, e.g. had a crossover current density of 232 mA/cm 2 at 0.9 V and 60 °C. One problem with using 1-methoxy-2-propanol as a fuel was that the cell anode seemed to be seriously poisoned by the oxidation intermediates at anode overpotentials lower than ca. 0.2 V.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Baldauf · J. Power Sources · 1999 · 84 · 16110.1016/S0378-7753(99)00332-8 ↗
2. Wasmus · J. Electroanal. Chem. · 1999 · 461 · 1410.1016/S0022-0728(98)00197-1 ↗
3. Cruickshank · J. Power Sources · 1998 · 70 · 4010.1016/S0378-7753(97)02626-8 ↗
4. Kuver · J. Power Sources · 1998 · 74 · 21110.1016/S0378-7753(98)00065-2 ↗
5. Scott · J. Power Sources · 1999 · 79 · 4310.1016/S0378-7753(98)00198-0 ↗
6. Scott · J. Power Sources · 1999 · 83 · 20410.1016/S0378-7753(99)00303-1 ↗
7. Heinzel · J. Power Sources · 1999 · 84 · 7010.1016/S0378-7753(99)00302-X ↗
8. Ren · J. Electrochem. Soc. · 2000 · 147 · 9210.1149/1.1393161 ↗
9. S. Banerjee, C.C. Cropley, J.A. Kosek, A.B. La Conti, US Patent no. 5,672,438, 30 September 1997.
10. Hobson · J. Electrochem. Soc. · 2001 · 148 · A118510.1149/1.1402980 ↗
11. G.K. Surya Prakash, G.A. Olah, M.C. Smart, S.R. Narayanan, Q. Wang, S. Surumpudi, G. Halpert, WO 98/22989, 28 May 1998.
12. P.G. Pickup, Z. Qi, WO 01/93361 A2, 6 December 2001.
13. Wang · J. Electrochem. Soc. · 1995 · 142 · 421810.1149/1.2048487 ↗
14. Narayanan · J. Electrochem. Soc. · 1997 · 144 · 419510.1149/1.1838165 ↗
15. S. Surampudi, S.R. Narayanan, E. Vamos, H.A. Frank, G. Halpert, G.A. Olah, G.K. Surya Prakash, US Patent no. 5,599,638, 4 February 1997.
16. Peled · Electrochem. Solid-State Lett. · 2001 · 4 · A3810.1149/1.1355036 ↗
17. Z. Qi, M. Hollett, A. Attia, A. Kaufman, Electrochem. Solid-State Lett. 4 (2001) A204–A205.10.1149/1.1414944 ↗
18. Wang · J. Electrochem. Soc. · 1996 · 143 · 123310.1149/1.1836622 ↗