Study on the influences of reduction temperature on nickel-yttria-stabilized zirconia solid oxide fuel cell anode using nickel oxide-film electrode
Source abstract
Abstract
Abstract In this study, the reduction processes of nickel oxide at different temperatures were investigated using nickel-film anode to study the influences of reduction temperature on the initial performances and stability of nickel-yttria-stabilized zirconia anode. Compared to conventional nickel-yttria-stabilized zirconia composite cermet anode, nickel-film anode has the advantage of direct observation at nickel-yttria-stabilized zirconia interface. The microstructural changes were characterized by scanning electron microscopy. The reduction process of nickel oxide is considered to be determined by the competition between the mechanisms of volume reduction in nickel oxide-nickel reaction and nickel sintering. Electrochemical impedance spectroscopy was applied to analyze the time variation of the nickel-film anode electrochemical characteristics. The anode performances and microstructural changes before and after 100 hours discharging and open circuit operations were analyzed. The degradation of nickel-film anode is considered to be determined by the co-effect between the nickel sintering and the change of nickel-yttria-stabilized zirconia interface bonding condition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Subhash · 2003
2. Primdahl · 1999
3. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells10.1016/j.jpowsour.2010.08.006 ↗
4. Badwal · 2003
5. You have full text access to this content solid oxide fuel cell performance under severe operating conditions10.1002/fuce.200500112 ↗
6. Sudden deterioration in performance during discharge of anode-supported solid oxide fuel cells10.5796/electrochemistry.77.123 ↗
7. de Boer · 1998
8. Kinetic studies of the reaction at the nickel pattern electrode on YSZ in H2-H2O atmospheres10.1016/0167-2738(94)90286-0 ↗
9. Preparation of nickel pattern electrodes on YSZ and their electrochemical properties in H2-H2O atmospheres10.1149/1.2055073 ↗
10. Three-phase-boundary dynamics at the Ni/ScYSZ interface10.1016/j.ssi.2009.01.017 ↗
11. Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells10.1016/S0167-2738(00)00650-0 ↗
12. The reduction of Tokyo and Sinter 75 nickel oxides with H210.1016/j.ces.2009.05.030 ↗
13. Reduction kinetics of Goro nickel oxide using H210.1016/j.ces.2004.11.024 ↗
14. In situ redox cycle of a nickel-YSZ fuel cell anode in an environmental transmission electron microscope10.1016/j.actamat.2010.04.019 ↗
15. Reduction of nickel oxide particles by H2 studied in an environmental TEM10.1007/s10853-012-7001-2 ↗
16. Effects of initial reduction temperature on the microstructures and performances of Ni/YSZ anodes for solid oxide fuel cells10.1149/2.077310jes ↗
17. Quantitative study on the correlation between solid oxide fuel cell Ni-YSZ composite anode performance and reduction temperature based on three-dimensional reconstruction10.1149/2.0721506jes ↗
18. Degradation and relaxation effects of Ni patterned anodes in H2-H2O atmosphere10.1149/1.3383041 ↗
19. Quantitative study on the correlation between solid oxide fuel cell Ni-YSZ composite anode performance and sintering temperature based on three-dimensional reconstruction10.1149/2.056207jes ↗
20. Study on local morphological changes of nickel in solid oxide fuel cell anode using porous Ni pellet electrode10.1016/j.jpowsour.2010.08.047 ↗
21. Study on degradation of solid oxide fuel cell anode by using pure nickel electrode10.1016/j.jpowsour.2011.06.069 ↗
22. Conductivity degradation of NiO-containing 8YSZ and 10YSZ electrolyte during reduction10.1016/j.ssi.2008.12.004 ↗
23. Phase transformation related electrical conductivity degradation of NiO doped YSZ10.1016/j.ssi.2012.05.023 ↗
24. Bonding structure, and properties of metal/ceramic interfaces: Part 1 Chemical bonding, chemical reaction, and interfacial structure10.1179/imr.1993.38.5.233 ↗
25. Simulation of the reduction process of solid oxide fuel cell composite anode based on phase field method10.1016/j.jpowsour.2015.11.061 ↗