Residual stress change with time of a segmented-in-series solid oxide fuel cell using an in situ X-ray stress measuring method
Source abstract
Abstract
Abstract The changes with time of the residual stress on the electrolyte were measured in situ during re-oxidation under solid oxide fuel cell (SOFC) operation conditions using a segmented-in-series (SIS)-type SOFC and a conventional anode-supported planar (ASP)-type SOFC to understand the mechanical behaviour of the materials in the SOFC. In situ X-ray residual stress measurement was successful, and the real-time change with time of the residual stress of the electrolyte was revealed under SOFC operating conditions. In the ASP-type SOFC, the residual stress changed from compression to tensile stress, and destruction of the cell was confirmed 20 min after the air introduction. In contrast, in the case of the SIS-type SOFC, the residual stress was almost constant, even when the anode material was exposed to oxidation conditions for more than 4 h. These results indicate that the SIS-type SOFC has a high tolerance against reduction and oxidation (redox) compared with the ASP-type SOFC, which requires a conductive support material with a high Ni content. This is because the SIS-type SOFC has an electrically insulated support material that does not require a high Ni content.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Fuel Cells and Related Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Yokokawa · ECS Trans. · 2011 · 35 · 20710.1149/1.3569995 ↗
2. Horiuchi · ECS Trans. · 2011 · 35 · 21710.1149/1.3569996 ↗
3. Kushi · J. Power Sources · 2011 · 196 · 798910.1016/j.jpowsour.2011.05.040 ↗
4. Atkinson · Solid State Ionics · 2000 · 134 · 5910.1016/S0167-2738(00)00714-1 ↗
5. Morales · Acta Mater. · 2010 · 58 · 250410.1016/j.actamat.2009.12.036 ↗
6. Selcuk · J. Eur. Ceram. Soc. · 1997 · 17 · 152310.1016/S0955-2219(96)00247-6 ↗
7. Adams · J. Am. Ceram. Soc. · 1997 · 80 · 90310.1111/j.1151-2916.1997.tb02920.x ↗
8. Hashida · ECS Trans. · 2009 · 25 · 156510.1149/1.3205692 ↗
9. Ettler · Ceramic Eng. Sci. Proc. · 2008 · 29 · 33
10. Klemenso · J. Electrochem Soc. · 2005 · 152 · A218610.1149/1.2048228 ↗
11. Klemenso · Ceramic Eng. Sci. Proc. · 2009 · 29 · 81
12. Waldbilling · Solid State Ionics · 2005 · 176 · 84710.1016/j.ssi.2004.12.002 ↗
13. Vedasri · J. Power Sources · 2010 · 195 · 553410.1016/j.jpowsour.2010.03.043 ↗
14. Fujita · J. Power Sources · 2011 · 196 · 902210.1016/j.jpowsour.2011.01.022 ↗
15. Somekawa · J. Power Sources · 2012 · 202 · 11410.1016/j.jpowsour.2011.11.056 ↗
16. Fujita · J. Power Sources · 2009 · 193 · 13010.1016/j.jpowsour.2008.11.091 ↗
17. T. Somekawa, K. Fujita, H. Yakabe, Y. Matsuzaki, in: Proceedings of 35th International Conference on Exposition on Advanced Ceramics and Composities, Daytona Beach, FL, USA, January 23–28, 2011, p. 40.
18. Matsuzaki · ECS Trans. · 2009 · 25 · 15910.1149/1.3205521 ↗
19. T. Ito, Y. Matsuzaki, in: Proceedings of 34th International Conference on Exposition on Advanced Ceramics and Composities, Daytona Beach, FL, USA, January 24–29, 2010, p. 40.
20. Noyman · Mater. Sci. Eng. · 1983 · 75 · 17910.1016/0025-5416(85)90188-0 ↗
21. Noyman · Adv. X-ray Anal. · 1984 · 27 · 12910.1007/978-1-4613-2775-2_16 ↗
22. K. Tanaka, Y. Yamamori, N. Mine, K. Suzuki, in: Proceedings of the 32nd Japan Congress on Materials Research, 1989, p. 199.10.5924/abgri1983.1989.29 ↗
23. Yoshioka · Adv. X-ray Anal. · 1981 · 24 · 167
24. Barral · Adv. X-ray Anal. · 1984 · 27 · 14910.1007/978-1-4613-2775-2_17 ↗
25. Hatae · J. Electrochem Soc. · 2010 · 157 · B65010.1149/1.3328453 ↗
26. Klemenso · Electrochemical Solid-State Lett. · 2006 · 9 · A40310.1149/1.2214303 ↗
27. Sarantaridis · J. Electrochem Soc. · 2008 · 155 · B46710.1149/1.2883731 ↗