journal article·2006-10Open access

Secondary current density distribution analysis of an aluminum–air cell

Shaohua Yang, Weiqian Yang, Gongquan Sun, Harold Knickle

Journal of Power Sources· Volume 161· Issue 2

Abstract

Secondary current density distributions in a parallel two-plane Al/air cell and a wedge shaped Al/air cell were analyzed. The parameters studied include the entrance effect, the activity of the cathode, the cell gap and the extension of the cathode. The entrance effect disappears at about a one to two cell gap from the entrance. The activity of the cathode has a large effect on the local current density. With increases in the cell gap, the average current density decreases, but the peak current density over the average current density increases. By extending the cathode below the anode, the high local current density can be reduced. In a wedge shaped Al/air cell, the planar portion of the anode enters the cell. As the anode is consumed, the top portion of the anode is consumed faster because of the decreased cell gap and increased reaction rate. The anode adapts to be parallel to the cathode in the cell. A FEMLAB (finite element method) package was used for all the calculations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Anodic Oxide Films and Nanostructures · Semiconductor materials and devices · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Design and analysis of aluminum/air battery system for electric vehicles10.1016/S0378-7753(02)00370-1 ↗
2. Aluminum/air electric vehicle life cycle analysis
3. Effect of cell gap on current density distribution in an aluminum/air cell
4. Two dimensional transport modeling of an aluminum/air cell
5. Modeling analysis of the performance of an aluminium–air cell10.1016/S0378-7753(03)00811-5 ↗
6. Analysis of primary and secondary current distributions in a wedge-type aluminum cell10.1007/BF01022242 ↗
7. Current distributions and electrode shape changes in electrochemical systems10.1007/978-3-642-84716-5_1 ↗
8. Comsol Company, FEMLAB, Multiphysics in MATLAB, September 2003, http://www.comsol.com.
9. Modeling calculations of an aluminium–air cell10.1149/1.2085911 ↗
10. Alupower, AC78 Technical Data Sheet, September 2002, http://www.yardney.com.
11. Analysis and design of a novel control method for aluminum/air battery system
12. Rand · 1998