In situ proton exchange membrane fuel cell durability of poly(vinylidene fluoride)/polyelectrolyte blend Arkema M43 membrane
Source abstract
Abstract
Abstract A typical perfluorosulfonic acid (PFSA) polymer electrolyte membrane is composed of a single type of polymer in order to meet the strict requirements for a fuel cell membrane. The Arkema Inc. membrane technology provides a simple and lower cost route to the design of durable membrane materials. The membrane employs two intimately mixed polymers: Kynar ® PVDF, which provides excellent mechanical characteristics, barrier properties and chemical stability, and a hydrocarbon polyelectrolyte for high proton conductivity and water transport. This work reports in-cell accelerated durability results of Arkema M43 membranes. Arkema M43 membranes demonstrated operation times that are 8–10 times longer than two other types of PFSA membranes under open-circuit voltage (OCV)-hold and voltage-cycle tests; these materials also exhibited significantly better durability than Nafion ® NRE211 under relative humidity (RH)-cycle tests. Unlike PFSAs, the membrane-electrode assemblies (MEAs) constructed using Arkema M43 membranes did not fail with catastrophic gas crossover in OCV-hold tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Yang · Journal of Power Sources · 2001 · 103 · 110.1016/S0378-7753(01)00812-6 ↗
2. Srinivasan · Journal of Power Sources · 1988 · 22 · 35910.1016/0378-7753(88)80030-2 ↗
3. T. Zhang, Graduate Dissertation, Princeton University, 2006.
4. Garland · 2009
5. Li · Chemistry of Materials · 2003 · 15 · 489610.1021/cm0310519 ↗
6. Pivovar · Journal of the Electrochemical Society · 2007 · 154 · B73910.1149/1.2740005 ↗
7. Gittleman · 2009
8. J. Goldbach, S. Gaboury, R. Umpleby, J. Parvole, D. Mountz, Arkema Inc., 2008.
9. Goldbach · 2009
10. Sethuraman · Journal of the Electrochemical Society · 2008 · 155 · B11910.1149/1.2806798 ↗
11. Ralph · Journal of the Electrochemical Society · 2008 · 155 · B41110.1149/1.2838163 ↗
12. Borup · Chemical Reviews (Washington, DC, United States) · 2007 · 107 · 390410.1021/cr050182l ↗
13. Adjemian · 2006
14. LaConti · 2003 · vol. 3
15. Wilkinson · 2003 · vol. 3
16. Mittal · 2008
17. Coms · ECS Transactions · 2008 · 16 · 23510.1149/1.2981859 ↗
18. Cleghorn · 2003 · vol. 3
19. B. Bahar, A.R. Hobson, J.A. Kolde, D. Zuckerbrod, W.L. Gore & Associates, Inc., 1996.
20. S. Banerjee, du Pont de Nemours, E.I., and Co., USA, Application: WO, 1995, p. 22.
21. H. Suzuki, Y. Nouji, K. Inoue, Toyota Jidosha Kabushiki Kaisha, Japan, Application: WO, 2008, p. 23.
22. Nakao · 2003 · vol. 3
23. N.R. Andrews, S.D. Knights, K.A. Murray, S.J. McDermid, S.M. MacKinnon, S. Ye., Ballard Power Systems Inc., Can., Application: US, 2005, p. 14.
24. Schiraldi · 2005 · 519
25. K.G. Raiford, D.E. Curtain, K. Kourtakis, E. I. Du Pont de Nemours and Company, USA, Application: WO, 2005, p. 25.
26. M.H. Frey, D.M. Pierpont, S.J. Hamrock, 3M Innovative Properties Company, USA, Application: US, 2007, p. 11.
27. H. Kawazoe, E. Endoh, H. Nakagawa, Asahi Glass Company, Limited, Japan, Application: WO, 2005, p. 26.
28. Curtin · Journal of Power Sources · 2004 · 131 · 4110.1016/j.jpowsour.2004.01.023 ↗
29. Gittleman · 2006
30. Adjemian · 2006
31. Aarhaug · ECS Transactions · 2008 · 16 · 168710.1149/1.2982009 ↗
32. Lai · 2009 · vols. 5–6
33. Guilminot · Journal of the Electrochemical Society · 2007 · 154 · B9610.1149/1.2388863 ↗
34. Borup · Journal of Power Sources · 2006 · 163 · 7610.1016/j.jpowsour.2006.03.009 ↗