Sodium silicate/graphite conductive composite bipolar plates for proton exchange membrane fuel cells
Source abstract
Abstract
Abstract The flexural strength, pore size distribution, resistance to acid corrosion and thermal properties of sodium silicate/graphite composite bipolar plates for proton exchange membrane fuel cells (PEMFC) were investigated in this paper. The experiment results show that when the graphite content is greater than 40 wt.%, the flexural strength of composite bipolar plate can attain 15 MPa and this composite bipolar plate was not broken during machining the flow fields. The large amount of porosity in this composite bipolar plate is from the silica gel capillary pores because of the solidification of sodium silicate, which makes it possess a humidifying function during PEMFC operation. The corrosion current is about 10 −4.5 A cm −2 from the polarization curves for this composite bipolar plate, which shows that this composite bipolar plate is acid-resistant. Na + ions leached from this composite bipolar plate is only a small percentage of the total Na + ion content in the composite bipolar plate after 1 M H 2 SO 4 solution corrosion at 30 °C for 1 h. Na + ions in the acidic corrosion solution increased a little with temperature from 30 to 80 °C. In addition, this composite bipolar plate was thermally stable from room temperature to 400 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Membrane-based Ion Separation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Water transport in polymer membranes for PEMFC10.1016/S0378-7753(99)00420-6 ↗
2. Internal hydration H2/O2 100cm2 polymer electrolyte membrane fuel cell10.1016/0378-7753(95)80005-2 ↗
3. Operating proton exchange membrane fuel cells without external humidification of the reactant gases: fundamental aspects10.1149/1.1837893 ↗
4. Preparation of a self-humidifying membrane electrode assembly for fuel cell and its performance analysis
5. T.A. Bekkedahl, L. Bregoli, Fuel cell having a hydrophilic substrate layer, WO0145191 (June 21, 2001).
6. G.J. Koncar, L.G. Marianowski, Proton exchange membrane fuel cell separator plate, US 5,942,347 (August 24, 1999).
7. Studies on preparation and performance of sodium silicate/graphite conductive composites10.1177/0021998306061296 ↗
8. Characteristics of droplet and film water motion in the flow channels of polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2005.12.081 ↗
9. Carl Reiser. Ion exchange membrane fuel cell power plant with water management pressure differentials. US 5,853,909 (December 29, 1998).
10. Shen Chun-hui, Pan Mu, Wu Qiong, Yuan Run-zhang, Performance of an aluminate cement/graphite conductive composite bipolar plate, J. Power Sources, in press (corrected proof, available online 3 February 2006).10.1016/j.jpowsour.2005.12.047 ↗
11. Zhu Chun-xi Lu Chen, The structure and strength of dehydrated water glass, Foundry (PR China) (12) (1998) 26–27.