Preparation and characterization of polymer electrolyte membranes based on silicon-containing core-shell structured nanocomposite latex particles
Source abstract
Abstract
Abstract A series of silicon-containing core-shell structured polyacrylate/2-acrylamido-2-methyl-1-propanesulfonic acid (SiO 2 -CS-PA/A) nanocomposite latex particles are prepared by the emulsifier-free emulsion polymerization of acrylate monomers and various amount of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) with colloidal nanosilica particles as seed. The chemical and morphological structures of latex particles with high monomer conversion are determined using Fourier transform infrared (FTIR), dynamic light scattering (DLS) and transmission electron microscopy (TEM). The SiO 2 -CS-PA/A nanocomposite membranes are fabricated through pouring the latex onto a clean surface of glass and drying at 60 °C for 10 h and 120 °C for 2 h. The nanocomposite membranes possess good thermal and dimensional stability. In addition, in comparison to Nafion ® 117, the nanocomposite membranes exhibit moderate proton conductivity, significantly better methanol barrier and selectivity. The methanol diffusion coefficient is in the range of 1.03 × 10 −8 to 5.26 × 10 −8 cm 2 s −1 which is about two orders of magnitude lower than that of Nafion ® 117 (2.36 × 10 −6 cm 2 s −1 ). The SiO 2 -CS-PA/A 5 membrane shows the highest selectivity value (2.34 × 10 5 S cm −3 ) which is approximately 11.0 times of that (2.13 × 10 4 S cm −3 ) of Nafion ® 117. These results indicate that the nanocomposite membranes are promising candidates to be used as polymer electrolyte membranes in direct methanol fuel cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advanced Battery Technologies Research · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Sulfophenylation of polysulfones for proton-conducting fuel cell membranes10.1002/1521-3927(20021001)23:15<896::AID-MARC896>3.0.CO;2-P ↗
2. Fabrication of function-graded proton exchange membranes for direct methanol fuel cells using electron beam-grafting10.1002/fuce.201200226 ↗
3. Functionalization of polymeric materials as a high performance membrane for direct methanol fuel cell: a review10.1016/j.reactfunctpolym.2014.09.019 ↗
4. A review of polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2007.03.044 ↗
5. Synthesis and characterization of highly fluorinated cross-linked aromatic polyethers for polymer electrolytes10.1021/cm101405h ↗
6. Polymer electrolyte membranes for the direct methanol fuel cell: a review10.1002/polb.20861 ↗
7. Performance analysis of polymer electrolyte membranes for direct methanol fuel cells10.1016/j.jpowsour.2013.05.180 ↗
8. Partially sulfonated polyaniline induced high ion-exchange capacity and selectivity of Nafion membrane for application in direct methanol fuel cells10.1016/j.memsci.2014.09.010 ↗
9. Composite silica/Nafion® membranes prepared by tetraethylorthosilicate sol–gel reaction and solution casting for direct methanol fuel cells10.1016/j.memsci.2005.07.026 ↗
10. Comparative effect of phthalazinone units in sulfonated poly(arylene ether ether ketone ketone) copolymers as proton exchange membrane materials10.1002/pola.22442 ↗
11. Synthesis of fluoro-containing sulfonated poly(phthalazinone ether ketone ketone)s and their properties as PEM in PEMFC and DMFC10.1016/j.memsci.2008.10.047 ↗
12. Durable sulfonated poly(arylene sulfide sulfone nitrile)s containing naphthalene units for direct methanol fuel cells (DMFCs)10.1021/ma400154t ↗
13. Controlled disulfonated poly(arylene ether sulfone) multiblock copolymers for direct methanol fuel cells10.1021/am500605e ↗
14. Synthesis and characterization of proton exchange membranes based on sulfonated poly(fluorenyl ether nitrile oxynaphthalate) for direct methanol fuel cells10.1016/j.ijhydene.2011.04.131 ↗
15. Performance of a vapor-fed polybenzimidazole (PBI)-based direct methanol fuel cell10.1021/ef8001839 ↗
16. Proton conductive polyimide electrolytes containing trifluoromethyl groups: synthesis, properties, and DMFC performance10.1021/ma049547e ↗
17. Functionalized bentonite clay-sPEEK based composite membranes for direct methanol fuel cells10.1016/j.electacta.2014.04.180 ↗
18. Membrane prepared by incorporation of crosslinked sulfonated polystyrene in the blend of PVdF-co-HFP/Nafion: a preliminary evaluation for application in DMFC10.1016/j.apenergy.2014.02.060 ↗
19. Polyelectrolyte complexes of chitosan and poly(acrylic acid) as proton exchange membranes for fuel cells10.1021/ma0355913 ↗
20. Hybrid hydrotalcite-sulfonated poly(ether ether ketone) cation-exchange membranes prepared by in situ sulfonation10.1021/ie1019563 ↗
21. Nafion®/mordenite composite membranes for improved direct methanol fuel cell performance10.1016/j.memsci.2010.12.030 ↗
22. Sol–gel based sulfonic acid-functionalized silica proton conductive membrane10.1016/j.jpowsour.2009.04.040 ↗
23. Porous layered oxide/Nafion® nanocomposite membranes for direct methanol fuel cell applications10.1016/j.micromeso.2008.09.017 ↗
24. Semi-interpenetrating polymer network proton exchange membranes with narrow and well-connected hydrophilic channels10.1016/j.jpowsour.2012.11.001 ↗
25. Poly(2,5-benzimidazole)–silica nanocomposite membranes for high temperature proton exchange membrane fuel cell10.1016/j.memsci.2012.04.018 ↗
26. Covalent-ionically cross-linked polyetheretherketone proton exchange membrane for direct methanol fuel cell10.1016/j.jpowsour.2010.03.023 ↗
27. Performance and efficiency of a DMFC using non-fluorinated composite membranes operating at low/medium temperatures10.1016/j.jpowsour.2004.12.061 ↗
28. Functionalized organic-inorganic nanostructured N-p-carboxy benzyl chitosan-Silica-PVA hybrid polyelectrolyte complex as proton exchange membrane for DMFC applications10.1021/jp806337b ↗
29. Performance of SPEEK based polymer-nanoclay inorganic membrane for DMFC10.1016/j.memsci.2011.08.016 ↗
30. Sulfonated graphene oxide platelets in Nafion nanocomposite membrane: advantages for application in direct methanol fuel cells10.1021/jp5080779 ↗
31. Organic/inorganic hybrid membranes for direct methanol fuel cells10.1016/j.memsci.2006.11.038 ↗
32. Novel composite proton-exchange membrane based on silica-anchored sulfonic acid (SASA)10.1016/j.jpowsour.2006.06.006 ↗
33. Membrane design for direct ethanol fuel cells: a hybrid proton-conducting interpenetrating polymer network10.1002/fuce.200700041 ↗
34. New highly proton-conducting membrane poly(vinylpyrrolidone)(PVP) modified poly(vinyl alcohol)/2-acrylamido-2-methyl-1-propanesulfonic acid (PVA–PAMPS) for low temperature direct methanol fuel cells (DMFCs)10.1016/j.polymer.2005.09.007 ↗
35. Crosslinked SPEEK/AMPS blend membranes with high proton conductivity and low methanol diffusion coefficient for DMFC applications10.1016/j.jpowsour.2007.03.028 ↗
36. Controlled growth of monodisperse silica spheres in the micron size range10.1016/0021-9797(68)90272-5 ↗