journal article·2006-10

Start-up strategies of an experimental fuel processor

Yih-Hang Chen, Cheng-Ching Yu, Yen-Chun Liu, Chiou-Hwang Lee

Journal of Power Sources· Volume 160· Issue 2
Publisher page

Abstract

In this work, cold start-up of a methane fuel processor is explored. The experimental fuel processor is intended to provide hydrogen for a proton exchange membrane (PEM) fuel cell for the power generation (3 kWe). A dynamic model describing a series of reactors, the reformer, three water–gas shift reactors, and preferential reactor is constructed. Two important factors for rapid start-up are identified: speed of temperature front propagation and acceptable CO concentration. Steady-state analyses reveal that the fuel feed flow rate with fixed steam-to-carbon and air-to-carbon ratios is an ideal manipulated variable. Considering both large initial heat flux and gradual transition back to nominal operation, the shape of feed manipulation is determined. With the feed scenario available, the fuel processor start-up can be formulated as a constrained optimization problem and can be solved numerically. From optimization result, a heuristic is generated for rapid start-up of a fuel processor. This leads to a 25% improvement in the start-up time. Finally, issues of design modification are explored for further reduction in the start-up time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalysts for Methane Reforming · Electrocatalysts for Energy Conversion · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Hydrogen from hydrocarbon fuels for fuel cells10.1016/S0360-3199(00)00097-5 ↗
2. 2000
3. Larminie · 2000
4. Hirschenhofer · 1998
5. Fuel processing for low-temperature and high-temperature fuel cells. Challenges, and opportunities for sustainable development in the 21st century10.1016/S0920-5861(02)00231-6 ↗
6. Environmental catalysis into the 21st century10.1016/S0920-5861(99)00237-0 ↗
7. Identification and control of an industrial steam reforming plant10.1002/cjce.5450720220 ↗
8. Modeling, simulation and sensitivity analysis of steam-methane reformer10.1016/0360-3199(89)90061-X ↗
9. Design of adiabatic fixed-bed reactors for the partial oxidation of methane to synthesis gas. Application to production of methanol and hydrogen-for-fuel-cells10.1016/S0009-2509(01)00130-0 ↗
10. Fuel processors for automotive fuel cell systems: a parametric analysis10.1016/S0378-7753(01)00784-4 ↗
11. Kinetics, simulation and insights for CO selective oxidation in fuel cell applications10.1016/j.jpowsour.2003.11.038 ↗
12. Comparison of conventional and membrane reactor fuel processors for hydrocarbon-based PEM fuel cell systems10.1016/j.ijhydene.2003.10.013 ↗
13. Dynamics of H2 production by steam reforming10.1016/j.jpowsour.2003.09.026 ↗
14. Modelling and dynamic simulation of a fuel cell system with an autothermal gasoline reformer10.1016/j.jpowsour.2003.09.028 ↗
15. Cold start simulations of a gasoline based fuel processor for mobile fuel cell applications10.1016/j.jpowsour.2003.09.038 ↗
16. Modeling of an experimental fuel processor10.1016/j.jpowsour.2005.01.035 ↗
17. Dynamic modeling and control structure design of an experimental fuel processor10.1016/j.ijhydene.2005.06.027 ↗
18. Steady-state and dynamic effects of design alternatives in heat-exchanger/furnace/reactor processes10.1021/ie9905411 ↗
19. Design and control of heat-integrated reactors10.1021/ie020324r ↗
20. Luyben · 1999
21. Arrangement of throughput manipulator and inventory control in plantwide control
22. Yu · 2006
23. Tuning PI controllers for integrator-dead time processes