journal article·2004-10

Wide range load controllable MCFC cycle with pressure swing operation

F YOSHIBA

Journal of Power Sources· Volume 137· Issue 2
Publisher page

Abstract

Abstract Partial load efficiencies of a natural gas fuelled MCFC/GT system are calculated; the efficiencies of four systems are compared. A constant pressure air compressor is applied in system cases 1 and 2, whereas a pressure swing air compressor is provided in system cases 3 and 4. A gas cooler is integrated in the cathode gas recycling line of cases 2–4, and an anode recycling with sub-reformer is provided in case 4. The cathode pressure loss in the MCFC stack is kept below 3 kPa during the calculation procedure to avoid a leakage of cathode gas. The range of the power load is limited to 50–100% in the constant operating pressure system (cases 1 and 2), mainly because of the limited cathode gas pressure loss of 3 kPa. The range of the power load is enlarged to 20–100% in cases 3 and 4 by combining the pressure swing operation with gas cooling in the cathode recycling line. In system cases 3 and 4, the efficiency at the lowest load operation (approx. 20–30% load) remains over 35% HHV-CH 4 , whereas the maximum efficiency is calculated to be 53% HHV-CH 4 in middle load operation; the efficiency of case 4 at 100% load is estimated to be 50% HHV-CH 4 . The combination of the pressure swing operation and gas cooling in the cathode recycling line offers a high efficiency of the MCFC system in a wide range of loads.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Thermal Expansion and Ionic Conductivity

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.