journal article·2003-07

The influence of the pickling and curing processes in the manufacturing of positive tubular electrodes on the performance of lead-acid batteries

E.E. Ferg, L. Geyer, A. Poorun

Journal of Power Sources· Volume 116· Issue 1-2
Publisher page

Abstract

Abstract The effects of changing the dipping and curing times of tubular positive electrodes on the discharge capacity were investigated. The comparative study showed that longer dipping and curing times do not necessarily result in electrodes with better first capacity performance. Acid adsorption studies of tubular plates filled with lead oxide showed that about one-third of the acid, that would have been adsorbed after 15 h, was already adsorbed after 5 s of dipping. The optimum surface area and porosity of the cured active material was obtained after 15–60 min of dipping. This is equivalent to the rest period used in the formation process where the plates are kept in the acid just before charging. Curing times should be kept around 24 h in order to reduce the free lead in the oxide. The study showed that the pore size distribution of the formed active material influenced the high current discharge ability more than the available surface area of the positive electrode. However, the surface area and pore size distribution changed dramatically during capacity cycling and the continuous capacity performance of the tubular electrode was partially influenced by the initial characteristics of the cured active material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Battery Technologies Research · Advancements in Battery Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Yang · J. Power Sources · 1985 · 15 · 1510.1016/0378-7753(85)80059-8 ↗
2. Lin · Electrochem. Acta · 1986 · 31 · 56510.1016/0013-4686(86)85034-4 ↗
3. H. Bode, Lead-Acid Batteries, Wiley, New York, 1977.
4. Prout · J. Power Sources · 1993 · 41 · 16310.1016/0378-7753(93)85010-L ↗
5. N.E. Hehner, Storage Battery Manufacturing Manual, 3rd ed., IBMA Inc., USA, 1986.
6. Kuhn · J. Power Sources · 1983 · 10 · 38910.1016/0378-7753(83)80019-6 ↗
7. Hill · J. Power Sources · 1983 · 9 · 5510.1016/0378-7753(83)87015-3 ↗
8. Prout · J. Power Sources · 1993 · 41 · 10710.1016/0378-7753(93)85009-D ↗
9. Dreier · J. Power Sources · 2000 · 85 · 11710.1016/S0378-7753(99)00390-0 ↗