Transient operation and shape optimization of a single PEM fuel cell
Source abstract
Abstract
Abstract Geometric design, including the internal structure and external shape, considerably affect the thermal, fluid, and electrochemical characteristics of a polymer electrolyte membrane (PEM) fuel cell, which determine the polarization curves as well as the thermal and power inertias. Shape optimization is a natural alternative to improve the fuel cell performance and make fuel cells more attractive for power generation. This paper investigates the internal and external structure effects on the fuel cell steady and transient operation with consideration of stoichiometric ratios, pumping power, and working temperature limits. The maximal steady state net power output and the fuel cell start-up time under a step-changed current load characterize the fuel cell steady and transient performance respectively. The one-dimensional PEM fuel cell (PEMFC) thermal model introduced in a previous work [J.V.C. Vargas, J.C. Ordonez, A. Bejan, Constructal flow structure for a PEM fuel cell, Int. J. Heat Mass Transfer 47 (2004) 4177–4193] is amended to simulate the fuel cell transient start-up process. The shape optimization consists of the internal and external PEMFC structure optimization. The internal optimization focuses on the optimal allocation of fuel cell compartment thicknesses. The external optimization process seeks the PEM fuel cell optimal external aspect ratios. These two levels of optimizations pursue the optimal geometric design with quick response to the step loads and large power densities. Appropriate dimensionless groups are identified and the numerical results are presented in dimensionless charts for general engineering design. The universality of the general optimal shape found is also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Fuel cells going on-board10.1016/S0378-7753(99)00414-0 ↗
2. Environmental benefits of transport and stationary fuel cells10.1016/S0378-7753(97)02730-4 ↗
3. The U.S. department of energy, office of fossil energy stationary fuel cells program10.1016/j.jpowsour.2004.12.003 ↗
4. Effect of channel dimensions and shape in the flow field distributor on the performance of polymer electrolyte membrane fuel cells10.1016/S0378-7753(02)00475-5 ↗
5. Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors10.1149/1.1391561 ↗
6. A general three-dimensional model for proton exchange membrane fuel cells
7. Three dimensional, two phase flow mathematical model for PEM fuel cell. Part I. Model development10.1016/j.enconman.2003.09.022 ↗
8. Three dimensional, two phase flow mathematical model for PEM fuel cell. Part II. Analysis and discussion of the internal transport mechanisms10.1016/j.enconman.2003.09.023 ↗
9. A model predicting transient responses of proton exchange membrane fuel cells10.1016/S0378-7753(96)02360-9 ↗
10. Dynamic behaviour of a PEM fuel cell stack for stationary applications10.1016/S0360-3199(00)00121-X ↗
11. Experimental evaluation of the dynamic behavior of an air-breathing fuel cell stack10.1115/1.1385202 ↗
12. Development of 1kW class polymer electrolyte membrane fuel cell power generation system10.1016/S0378-7753(01)00989-2 ↗
13. A liquid water management strategy for PEM fuel cell stacks10.1016/S0378-7753(02)00591-8 ↗
14. Active gas management for PEM fuel cell stacks10.1016/j.jpowsour.2004.06.029 ↗
15. Steady-state operation of a compressor for a proton exchange membrane fuel cell system10.1023/A:1003675722428 ↗
16. A model predicting performance of proton exchange membrane fuel cell stack thermal systems10.1016/j.applthermaleng.2003.10.013 ↗
17. Modelling of polymer electrolyte membrane fuel cell stacks based on a hydraulic network approach10.1002/er.993 ↗
18. Proton exchange membrane (PEM) fuel cell stack configuration using genetic algorithms10.1016/j.jpowsour.2004.01.012 ↗
19. Constructal PEM fuel cell stack design10.1016/j.ijheatmasstransfer.2005.05.009 ↗
20. Thermodynamic optimization of internal structure in a fuel cell10.1002/er.967 ↗
21. Constructal flow structure for a PEM fuel cell10.1016/j.ijheatmasstransfer.2004.05.004 ↗
22. Bejan · 2000
23. Shah · 1978
24. Bejan · 1995
25. Bird · 2002
26. Newman · 1991
27. Exploring the Maxwell–Stefan description of ion-exchange10.1016/0923-0467(94)02932-6 ↗
28. Moran · 1993
29. Masterton · 1997
30. Polymer electrolyte fuel cell model10.1149/1.2085971 ↗
31. Ionic conductivity of PEMFC electrodes10.1149/1.1611493 ↗
32. Two-dimensional simulation of direct methanol fuel cells—a new (embedded) type of current collector10.1149/1.1393297 ↗
33. An analytical solution of a half-cell model for PEM fuel cells10.1149/1.1393555 ↗
34. Bockris · 1972
35. Bard · 2001
36. Kincaid · 1991
37. Randall · 1997
38. Constructal theory: from engineering design to predicting shape and structure in nature