journal article·2016-11Open access

Electrochemical fields within 3D reconstructed microstructures of mixed ionic and electronic conducting devices

Yanxiang Zhang, Yu Chen, Ye Lin, Mufu Yan, William M. Harris, Wilson K.S. Chiu, Meng Ni, Fanglin Chen

Abstract

Abstract The performance and stability of the mixed ionic and electronic conducting (MIEC) membrane devices, such as solid oxide cells (SOCs) and oxygen separation membranes (OSMs) interplay tightly with the transport properties and the three-dimensional (3D) microstructure of the membrane. However, development of the MIEC devices is hindered by the limited knowledge about the distribution of electrochemical fields within the 3D local microstructures, especially at surface and interface. In this work, a generic model conforming to local thermodynamic equilibrium is developed to calculate the electrochemical fields, such as electric potential and oxygen chemical potential, within the 3D microstructure of the MIEC membrane. Stability of the MIEC membrane is evaluated by the distribution of oxygen partial pressure. The cell-level performance such as polarization resistance and voltage vs. current curve can be further calculated. Case studies are performed to demonstrate the capability of the framework by using X-ray computed tomography reconstructed 3D microstructures of a SOC and an OSM. The calculation method demonstrates high computational efficiency for large size 3D tomographic microstructures, and permits parallel calculation. The framework can serve as a powerful tool for correlating the transport properties and the 3D microstructure to the performance and the stability of MIEC devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells10.1016/j.pmatsci.2011.08.002 ↗
2. Technological development of hydrogen production by solid oxide electrolyzer cell (SOEC)10.1016/j.ijhydene.2008.02.048 ↗
3. Mixed ionic-electronic conducting (MIEC) ceramic-based membranes for oxygen separation10.1016/j.memsci.2008.03.074 ↗
4. Factors governing oxygen reduction in solid oxide fuel cell cathodes10.1021/cr020724o ↗
5. Electrode kinetics of porous mixed-conducting oxygen electrodes10.1149/1.1837252 ↗
6. The effect of porous composite electrode structure on solid oxide fuel cell performance: I. Theoretical analysis10.1149/1.1837360 ↗
7. Prediction of infiltrated solid oxide fuel cell cathode polarization resistance10.1016/j.elecom.2008.10.006 ↗
8. Micro-scale modelling of solid oxide fuel cells with micro-structurally graded electrodes10.1016/j.jpowsour.2007.03.005 ↗
9. Modeling elementary heterogeneous chemistry and electrochemistry in solid-oxide fuel cells10.1149/1.2116607 ↗
10. Cathode micromodel of solid oxide fuel cell10.1149/1.1630036 ↗
11. Continuum-level analytical model for solid oxide fuel cells with mixed conducting electrolytes fuel cells and energy conversion10.1149/1.3158513 ↗
12. Electrochemistry of mixed oxygen ion and electron conducting electrodes in solid electrolyte cells10.1146/annurev-chembioeng-073009-101000 ↗
13. Three-dimensional microstructural imaging methods for energy materials10.1039/c3cp52356j ↗
14. Microstructural analysis of a solid oxide fuel cell anode using focused ion beam techniques coupled with electrochemical simulation10.1016/j.jpowsour.2010.02.047 ↗
15. Nondestructive nanoscale 3D elemental mapping and analysis of a solid oxide fuel cell anode10.1149/1.3355957 ↗
16. Numerical assessment of SOFC anode polarization based on three-dimensional model microstructure reconstructed from FIB-SEM images10.1149/1.3330568 ↗
17. 3D-modelling and performance evaluation of mixed conducting (MIEC) cathodes10.1149/1.2729320 ↗
18. Time-dependent 3D impedance model of mixed-conducting solid oxide fuel cell cathodes10.1149/2.093308jes ↗
19. 3D finite element model for reconstructed mixed-conducting cathodes: I. Performance quantification10.1016/j.electacta.2012.04.109 ↗
20. 3D finite element model for reconstructed mixed-conducting cathodes: II. Parameter sensitivity analysis10.1016/j.electacta.2012.04.163 ↗
21. Flexible multiphysics simulation of porous electrodes: conformal to 3D reconstructed microstructures10.1016/j.nanoen.2012.08.002 ↗
22. Theoretical analysis of the role of interfaces in transport through oxygen ion and electron conducting membranes10.1016/j.jpowsour.2005.01.038 ↗
23. Mechanism of oxygen electrode delamination in solid oxide electrolyzer cells10.1016/j.ijhydene.2010.06.058 ↗
24. 23-The postulates of steady-state thermodynamics
25. Diffusion kinetics in solids
26. Einstein and linear response formulae for the phenomenological coefficients for isothermal matter transport in solids10.1088/0022-3719/15/27/016 ↗
27. Bard · 2002
28. Electrical conductivity of silver sulfide10.1063/1.1700165 ↗
29. Modeling the steady-state and transient response of polarized and non-polarized proton-conducting doped-perovskite membranes10.1149/2.016304jes ↗
30. Correlation effects in tracer diffusion and ionic conductivity10.1016/0167-2738(86)90215-8 ↗
31. 20-Chemical reactions
32. Theory of chemical kinetics and charge transfer based on nonequilibrium thermodynamics10.1021/ar300145c ↗
33. How is oxygen incorporated into oxides? A comprehensive kinetic study of a simple solid-state reaction with SrTiO3 as a model material10.1002/anie.200700987 ↗
34. Oxygen exchange and diffusion coefficients of strontium-doped lanthanum ferrites by electrical conductivity relaxation10.1149/1.1837531 ↗
35. Tracer diffusion and chemical diffusion of oxygen in acceptor doped SrTiO310.1016/S0022-3697(99)00421-7 ↗
36. Reconstruction of relaxation time distribution from linear electrochemical impedance spectroscopy10.1016/j.jpowsour.2015.02.107 ↗
37. Distributions of charged defects in mixed ionic-electronic conductors: I. general equations for homogeneous mixed ionic-electronic conductors10.1149/1.1837685 ↗
38. Estimation of charge-transfer resistivity of La0.8Sr0.2MnO3 cathode on Y0.16Zr0.84O2 electrolyte using patterned electrodes10.1149/1.1829415 ↗
39. Equivalent circuit approximation to porous mixed-conducting oxygen electrodes in solid-state cells10.1149/1.1838227 ↗
40. Significance of interfaces in solid-state cells with porous electrodes of mixed ionic–electronic conductors10.1016/S0167-2738(97)00528-6 ↗
41. Triple-phase boundary and surface transport in mixed conducting patterned electrodes10.1149/1.2898152 ↗
42. Reactive mechanisms of LSCF single-phase and LSCF-CGO composite electrodes operated in anodic and cathodic polarisations10.1016/j.electacta.2015.06.080 ↗
43. Dependence of polarization in anode-supported solid oxide fuel cells on various cell parameters10.1016/j.jpowsour.2004.08.057 ↗
44. 1. Basic concepts and stationary iterative methods
45. Preparation and oxygen permeability of Gd-Doped Ceria and spinel-type ferrite composites10.1557/PROC-756-EE8.11 ↗
46. Low temperature solid oxide fuel cells with hierarchically porous cathode nano-network10.1016/j.nanoen.2014.05.010 ↗
47. Electrical properties and oxygen diffusion in yttria-stabilised zirconia (YSZ)-La0.8Sr0.2MnO3-d (LSM) composites10.1016/j.ssi.2004.11.019 ↗
48. Oxygen transport in La1-xSrxMn1-yCoyO3-d perovskites: Part I. Oxygen tracer diffusion10.1016/S0167-2738(97)00499-2 ↗
49. Measurement of ionic and electronic conductivities of yttria-stabilized zirconia by an embedded electrode method10.1149/2.0691503jes ↗
50. Oxygen transport in La0.6Sr0.4Co0.2Fe0.8O3-d10.1016/S0167-2738(99)00014-4 ↗
51. Importance of the surface exchange kinetics as rate limiting step in oxygen permeation through mixed-conducting oxides10.1016/0167-2738(94)90145-7 ↗
52. Electronic conductivity of Gd-doped ceria with additional Pr-doping10.1016/S0167-2738(98)00408-1 ↗
53. Electronic transport in 8 mole percent Y2O3-ZrO210.1149/1.2096302 ↗
54. Calculation of the e.m.f. of solid oxide fuel cells10.1023/A:1004138703860 ↗
55. Enhancing grain boundary ionic conductivity in mixed ionic-electronic conductors10.1038/ncomms7824 ↗
56. Characterization of 3D interconnected microstructural network in mixed ionic and electronic conducting ceramic composites10.1039/c3nr06684c ↗
57. Syngas production at intermediate temperature through H2O and CO2 electrolysis with a Cu-based solid oxide electrolyzer cell10.1016/j.ijhydene.2013.12.045 ↗
58. High-performance solid oxide electrolysis cell based on ScSZ/GDC (scandia-stabilized zirconia/gadolinium-doped ceria) bi-layered electrolyte and LSCF (lanthanum strontium cobalt ferrite) oxygen electrode10.1016/j.energy.2015.06.109 ↗
59. Failure mechanism of (La,Sr)MnO3 oxygen electrodes of solid oxide electrolysis cells10.1016/j.ijhydene.2011.05.103 ↗
60. A model for solid oxide fuel cell (SOFC) stack degradation10.1016/j.jpowsour.2007.05.076 ↗
61. Evolution of the electrochemical interface in high-temperature fuel cells and electrolysers10.1038/nenergy.2015.14 ↗