journal article·2004-09

Development of spinel forming alloys with improved electronic conductivity for MCFC applications

I. Parezanović, E. Strauch, M. Spiegel

Journal of Power Sources· Volume 135· Issue 1-2
Publisher page

Abstract

Abstract The molten carbonate fuel cells (MCFC), as an alternative power source, present one of the most promising and environmental cleanest processes. As a high temperature fuel cell, problems arise due to corrosion of the metallic current collectors and voltage drop by formation of insulating corrosion products. The aim of this work is to develop Fe–Cr stainless steels, alloyed with different amounts of Mn, Co, Si, Ni, Mo, in order to obtain an acceptable thin corrosion scale with a low electrical resistivity by spinel formation. The formation of spinel layers as corrosion products, containing multivalent elements like Mn, Co and Mo is expected to give satisfactory results. In situ conductivity measurements and corrosion tests have been performed in the presence of a (Li, K) carbonate melt at 650 °C under an oxidizing gas atmosphere (15 vol.% CO 2 and synthetic air) up to 5000 h. Investigations of the corrosion scales on the hot rolled alloys indicated a solubility of Co and Mn in the spinel layer, formed under the simulated MCFC conditions. Outward diffusion of Mn and Co was observed after longer reaction times. An inner oxidation zone was also measured and connection between conductivity behaviour and the composition of this layers is found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Corrosion Behavior and Inhibition · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. Influence of the alloying elements Man and Co on the electrical resistance and corrosion behaviour of bipolar plate materials in MCFC
2. The transport properties and defect structure of the oxide (Fe, Cr)2O3 formed on Fe–Cr alloys10.1002/maco.19700211107 ↗
3. F.A. Kröger, The Chemistry of Imperfect Crystals, North-Holland Publishing Company, Amsterdam, Netherlands, 1964, p. 733.
4. Emploi des oxydes métalliques 3d et 4d comme catalyseurs dans les piles oxygéne–hydrogéne
5. Incorporation of divalent cations in Cr2O3 during the oxidation of Fe–18% Cr–Ni alloys at 1123K10.1016/S0010-938X(70)80021-X ↗
6. P. Biedenkopf, T. Wochner, High temperature materials in molten carbonate fuel cells, in: High Temperature Material Chemistry Proceedings of the 10th International IUPAC Conference, Part I, 2000, pp. 707–710.
7. Improvement of molten carbonate fuel cell (MCFC) lifetime10.1016/0378-7753(92)80008-Y ↗
8. F.A. Kröger, The Chemistry of Imperfect Crystals, North-Holland Publishing Company, Amsterdam, Netherlands, 1964, p. 737.
9. The development of LiFeO2–LiCoO2–NiO cathodes for molten carbonate fuel cells10.1149/1.1391766 ↗
10. T.D. Kaun, A.C. Schoeler, I. Bloom, M. Lanagan, M. Krumpelt, Resistivity of bipolar plate materials at the cathode interface in molten carbonate fuel cells, Presented at the 194th Meeting of the Electrochemical Society, Boston, MA, USA, 1998.
11. Point defects in ternary ionic crystals10.1016/0079-6786(65)90009-9 ↗
12. The kinetics and mechanism of solid-state spinel formation—a review and critique10.1007/BF00603514 ↗