Three-dimensional thermo-fluid and electrochemical modeling of anode-supported planar solid oxide fuel cell
Source abstract
Abstract
This paper presents a three-dimensional model of an anode-supported planar solid oxide fuel cell with corrugated bipolar plates serving as gas channels and current collector above the active area of the cell. Conservation equations of mass, momentum, energy and species are solved incorporating the electrochemical reactions. Heat transfer due to conduction, convection and radiation is included. An empirical equation for cell resistance with measured values for different parameters is used for the calculations. Distribution of temperature and gas concentrations in the PEN (positive electrode/electrolyte/negative electrode) structure and gas channels are investigated. Variation of current density over the cell is studied. Furthermore, the effect of radiation on the temperature distribution is studied and discussed. Modeling results show that the relatively uniform current density is achieved at given conditions for the proposed design and the inclusion of thermal radiation is required for accurate prediction of temperature field in the single cell unit.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. 2003
2. U.S. DOE · 2004
3. A review of numerical modeling of solid oxide fuel cells10.1016/j.ijhydene.2006.11.028 ↗
4. 3D modeling of anode-supported planar SOFC with internal reforming of methane10.1016/j.jpowsour.2007.07.003 ↗
5. Modeling Radiation Heat Transfer With Participating Media in Solid Oxide Fuel Cells10.1115/1.2134738 ↗
6. Numerical analysis of thermal and electrochemical phenomena for anode supported microtubular SOFC10.1002/aic.11697 ↗
7. 3-D model of thermo-fluid and electrochemical for planar SOFC10.1016/j.jpowsour.2007.02.019 ↗
8. Radiation heat transfer analysis of the monolith type solid oxide fuel cell10.1016/S0378-7753(03)00732-8 ↗
9. Radiation heat transfer in planar SOFC electrolytes10.1016/j.jpowsour.2005.07.045 ↗
10. Analysis of processes in planar solid oxide fuel cells10.1016/j.ssi.2008.02.007 ↗
11. 3-D model calculation for planar SOFC10.1016/S0378-7753(01)00792-3 ↗
12. Definition and sensitivity analysis of a finite volume SOFC model for a tubular cell geometry10.1016/j.jpowsour.2004.01.043 ↗
13. Thermal and electrochemical model of internal reforming solid oxide fuel cells with tubular geometry10.1016/j.jpowsour.2006.02.098 ↗
14. Electrochemical model of the integrated planar solid oxide fuel cell (IP-SOFC)10.1016/j.cej.2004.02.005 ↗
15. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
16. Thermodynamic and transport properties of gases for use in solid oxide fuel cell modeling10.1016/S0378-7753(02)00277-X ↗
17. Poling · 2000