Nickel–zinc accordion-fold batteries with microfibrous electrodes using a papermaking process
Source abstract
Abstract
Abstract Thin microfibrous substrates were built using a low cost, high speed, wet lay papermaking process with nickel and copper microfibers. High quality microfiber sheets with designed thickness and void volumes were fabricated at the Center for Microfibrous Materials Manufacturing at Auburn University. Products include thin microfibrous nickel and copper substrates with or without suitable expanded metal meshes, either sandwiched inside or on the backside. An improved method for fabrication of zinc electrodes was accomplished by electro-depositing active zinc material on 6 and/or 9 μm diameter microfibrous copper substrates. These zinc electrodes with various additives were examined for shape change and tested for performance. A new structure of electrode design was employed using an accordion-fold cell. By using five individual segments sintered onto an expanded metal mesh, an accordion-fold cell (670 mAh rated capacity) was assembled and had 98.0% coulomb efficiency, 88.6% energy efficiency at 72% depth-of-discharge (DOD) and 73.2% state-of-recharge (SOR) in the 79th cycle. A Ni–Zn cell consisting of one thick nickel and one thick zinc electrode was tested for rate performance in comparison with the 670 mAh accordion-fold cell. The accordion-fold cell (1279 mAh rated capacity) was scaled-up and tested for 835 cycles at 38% DOD at a 0.3 C charge and discharge rates, and continuously operated at 38% DOD until the 1050th cycle was finished at 0.16 C charge/discharge rates. A 7115 mAh accordion-fold demonstration cell was tested at 0.28 C charge and discharge rates for 608 cycles and still had a 4.7 Ah capacity at a 0.08 C discharge rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Energy Harvesting in Wireless Networks · Advanced battery technologies research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. B.J. Tatarchuk, M.F. Rose, A. Krishnagopalan, J.N. Zabasaja, D. Kohler, Mixed fiber composite structures: high surface area-high conductivity mixtures, US Patent 5,080,963 (1992).
2. B.J. Tatarchuk, M.F. Rose, A. Krishnagopalan, Mixed Fiber Composite structures: method of preparation, articles therefrom, and uses therefor, US Patent 5,102,745 (1992).
3. Metal–carbon composite electrodes from fiber precursors. I. Preparation of stainless steel–carbon composite electrodes10.1149/1.2086348 ↗
4. Metal–carbon composite electrodes from fiber precursors. II. Electrochemical characterization of stainless steel–carbon structures10.1149/1.2086793 ↗
5. Johnson · J. Power Sources · 1994 · 47 · 25110.1016/0378-7753(94)87004-7 ↗
6. P.K. Adanuvor, J.A. Pearson, B. Miller, Bruce J. Tatarchuk, D.L. Britton, in: Proceedings of the Space Electrochemical Research and Technology Conference, NASA Lewis Research Center, Cleveland, Ohio, NASA Conference Publication 3337, May 1995, pp. 11–21.
7. M.E. Flanzer, Development and Characterization of Thin Microfiber based zinc electrodes for battery applications, Master Thesis, Auburn University, Auburn, March 1998.
8. J.A. Keralla, Zinc electrode manufacture, in: A. Fleischer, J. Lander (Eds.), Zinc–Silver Oxide Batteries, Wiley, New York, 1971, pp. 183–197.
9. The secondary alkaline zinc electrode10.1149/1.2085653 ↗
10. Arouete · J. Electrochem. Soc. · 1969 · 116 · 16610.1149/1.2411787 ↗
11. Nickel/zinc batteries10.1016/0378-7753(94)01954-1 ↗
12. Gagnon · J. Electrochem. Soc. · 1987 · 134 · 209110.1149/1.2100830 ↗
13. A. Charkey, Sealed zinc secondary battery and zinc electrode therefor, US Patent 5,460,899 (1995).
14. F. Cao, A. Charkey, K. Williams, Thermal behavior and end-of-life characteristics of the nickel–zinc battery, in: Proceedings of the 35th Intersociety Energy Conversion Engineering Conference, vol. 2, 2000, pp. 985–994.10.2514/6.2000-2975 ↗
15. C. Schlatter, C. Comninellis, S. Muller, O. Haas, in: New Promising Electrochemical Systems for Rechargeable Batteries, Kluwer Academic Publishers, Amsterdam, 1996, pp. 131–141.10.1007/978-94-009-1643-2_10 ↗
16. R.L. Beauchamp, D.W. Maurer, T.D. O’Sullivan, Methods of producing electrodes for alkaline batteries, US Patent 4,032,697 (1977).
17. C. Bleser, Positive electrode processing for Hughes Ni–H2 cells, in: Proceedings of the Goddard Space Flight Center Battery Workshop, 1981, pp. 471–480.
18. D.L. Britton, Performance of lightweight nickel electrodes, NASA Technical Memorandum 100,958 (1988).
19. J.A. Dean, Lance’s Handbook of Chemistry, 12th ed., McGraw-Hill, New York, 1979, pp. 5–8, 12.
20. R.A. Sharma, Thermodynamic properties of a zinc/nickel oxide cell, in: D.A. Corrigan, A.H. Zimmerman (Eds.), Proceedings of the Symposium on Nickel Hydroxide Electrodes, vol. 90-4, The Electrochemical Society, Pennington, NJ, 1990, pp. 403–425.