Development of a plastic Li-ion battery cell for EV applications
Source abstract
Abstract
Abstract Large plastic Li-ion (PLI) cells (25–28 Ah) have been fabricated for electric vehicle (EV) applications. The 28 Ah cells show high specific energy (160 Wh/kg), high specific power (526 W/kg), excellent round-trip energy efficiency (92%), and a low self-discharge rate (6% in 30 days). A 25 Ah cell of an earlier design has a good cycle-life of up to 750 cycles at 100% depth-of-discharge (DOD) to 80% of its initial capacity. Cycle-life tests of a 28 Ah cell of a later design is in progress. Preliminary safety tests have also been carried out using 6 Ah cells of a similar electrode design. These give very encouraging results for the development of a safe, high-energy PLI battery for EV duty.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced DC-DC Converters
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (5)
Show source-provided references
1. F.K. Shokoohi, et al., in: Proceedings of the 37th Power Sources Conference on Bellcore’s Plastic Lithium-Ion Battery, Cherry Hill, NJ, 17–20 June 1996.
2. C. Schmutz, et al., in: S. Megahed, B.M. Barnett, L. Xie (Eds.), Proceedings of the Electrochemical Society on a New Rechargeable Plastic Li-Ion Battery, Pennington, NJ, Vol. 28, 1994, p. 330.
3. USABC Electric Vehicle Battery Test Procedures Manual, Revision 2, Vol. 26 Part A, January 1996, Procedure #3 Peak Power Test.
4. SAE Publication, SAE, J1798 issued in January 1997.
5. R.A. Sutula, et al., Electric and hybrid vehicle energy storage R&D programs for the US Department of Energy, in: Proceedings of the 16th International Electric Vehicle Symposium, Beijing, China, 12–16 October 1999.