Benchmarking of chemical flowsheeting software in fuel cell applications
Source abstract
Abstract
The use of chemical flowsheeting software has become an integral part of the evaluation of the performance of fuel cell systems. There are, however, aspects that have to be kept in mind when comparing the results obtained in different system studies. If care is not taken, the obvious merit of one system over another could later be found to be induced by the software used for the study, more than by a superior systems layout. Some causes of these deviations are discussed based on a comparative system study, which was carried out using three different types of chemical simulation software. It is found that even though there appears to be no differences on an overall level, significant differences are found when examining at a more detailed level. The differences are found to be caused by differing thermodynamic data relating to the steam reforming section of the fuel cell system. Some of the deviations are also believed to be caused by convergence-related issues.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Electrocatalysts for Energy Conversion
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. J.R. Malloy Jr., System design and economic evaluation of an H2-air phosphoric acid fuel cell power plant for all electric and cogeneration applications, Laboratory for Electromagnetic and Electronic Systems, School of Engineering, Massachusetts Institute of Technology, May 1985.
2. T. Mäkinen, J. Leppälahti, E. Kurkela, Y. Solantausta, Sähköntuotannon uudet vaihtoehdot, Osa 3, Sähköntuotanto biomassasta ja maakaasustakiinteäoksidipoltto-kennolla VTT, Research Notes, Vol. 1397, Finland, 1992.
3. Description of a Generic 11-MW Fuel Cell Power Plant for Utility Applications, Interim Report, EPRI EM-3161, Project 1777-1, Electric Power Research Institute, September 1983.
4. Feasibility of Cogeneration Application of a 4.8MW Fuel Cell Power Plant at a Santa Clara, California Paper Mill, Final Report, US DOE Contract ET-78-C-08-2189, US Department of Energy, July 1979.
5. Assessment of Options for a 20–30MW (e) Lignite-Fuelled Cogeneration Power Plant, Final Report, EPRI EM-3334, Project 1041-9, Electric Power Research Institute, January 1984.
6. Parametric Analysis of a 6500-Btu/kWh Heat Rate Dispersed Generator, Final Report, EPRI EM-4179, Project 1041-12, Electric Power Research Institute, August 1985.
7. Assessment of Centralized Medium-sized Fuel Cell Power Plants, Final Report, EPRI EM-4332, Project 1041-20, Electric Power Research Institute, November 1985.
8. Dodds · Nucl. Sci. Eng. · 1977 · 64 · 6410.13182/NSE77-A27077 ↗
9. Leesley · Comp. Aided Design · 1978 · 10 · 15510.1016/0010-4485(78)90139-2 ↗
10. V. Bakshi, in: Proceedings of the American Control Conference, Vol. 3, Part 3, New Mexico, 1997, pp. 1579–1582.10.1109/ACC.1997.610849 ↗
11. P.C. van der Laag, T.W. Verbruggen, in: Proceedings of the 1994 Fuel Cell Seminar — Program and Abstracts, November/December 1994, pp. 152–155.
12. Kortbeek · J. Power Sources · 1998 · 71 · 22310.1016/S0378-7753(97)02755-9 ↗
13. C.L. Laursen, L.J. Christiansen, in: Proceedings of the 1990 Fuel Cell Seminar — Program and Abstracts, December 1990, pp. 44–47.
14. T. Hirata, H. Ikeda, in: H. Arai (Ed.), Proceedings of International Workshop on Catalytic Combustion, Tokyo, 1994, pp. 92–95.
15. Selman · Energy Int. J. · 1986 · 11 · 153