Porous nickel MCFC cathode coated by potentiostatically deposited cobalt oxide
Source abstract
Abstract
Porous nickel cathode was protected by potentiostatically deposited cobalt at different experimental conditions: oxidation potential and electrolysis duration. The deposition growth increased with the oxidation potential yielding a more developed granular structure with smaller grains. Thin layers of Co 3O 4 were identified by X-ray diffraction (XRD) and Raman spectroscopy. CoOOH was detected by X-ray photoelectron spectroscopy (XPS) before annealing treatment and Co 3O 4 after heating the sample at 500 °C during 4 h in air. After this treatment, some morphological changes were observed on the coated samples due to grain compaction and oxidation of the nickel substrate. The porosity of the coated samples was relatively close to that of the sole porous nickel. These coatings exhibited an appropriate dual-pore structure with macro and micro pores, a basic MCFC requirement.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrocatalysts for Energy Conversion · Supercapacitor Materials and Fabrication · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Solubility and deposition of LiCoO2 in a molten carbonate10.1016/S0378-7753(97)02729-8 ↗
2. Solubility of cobalt oxide in molten carbonate10.1149/1.2049982 ↗
3. A comparative study of NiO(Li), LiFeO2, and LiCoO2 porous cathodes for moltan carbonate fuel cells10.1149/1.2059349 ↗
4. Molten carbonate fuel cell research. Part I. Comparing cathodic oxygen reduction in lithium/potassium and lithium/sodium carbonate melts10.1016/S0013-4686(99)00305-9 ↗
5. Development and characterization of novel cathode materials for molten carbonate fuel cell10.1016/0378-7753(93)01814-X ↗
6. Development of molten carbonate fuel cell using novel cathode material10.1016/0360-3199(95)00097-6 ↗
7. S.W. Nam, S.G. Kim, I.H. Oh, T.H. Lim, H.Y. Ha, S.A. Hong, K. Kim, H.C. Lim, 1999, Carbonate fuel cell technology V, in: I. Uchida, et al. (Eds.), LiCoO2-coated NiO cathode for MCFC, PV 99-20, The Electrochemical Society Series, Pennington, NJ, p. 253.
8. Properties of NiO cathode coated with lithiated Co and Ni solid solution for MCFCs10.1016/S0378-7753(99)00416-4 ↗
9. Properties of a new type of cathode for molten carbonate fuel cells10.1016/S0378-7753(99)00251-7 ↗
10. The formation of LiCoO2 on a NiO cathode for a molten carbonate fuel cell using electroplating10.1039/b003972l ↗
11. Electrochemical deposition of Co3O4 thin layers in order to protct the nickel-based molten carbonate fuel cell cathode10.1016/S0022-0728(03)00228-6 ↗
12. L. Mendoza, A. Galtayries, A. Ringuedé, M. Cassir, II. Structural, morphological, chemical and electrochemical analysis of nickel covered by electrochemically deposited Co3O4 in molten Li2CO3-Na2CO3 at 650°C, J. Electroanal. Chem. (2003), in press.
13. The Raman spectra of Co3O410.1088/0022-3719/21/7/007 ↗
14. Infrared and Raman spectra and lattice vibrations of some oxide spinels10.1143/JPSJ.51.592 ↗
15. Role of Co-W interaction in the selective growth of single walled carbon nanotubes from CO disproportionation10.1021/jp027602k ↗
16. An XPS and AES study of the ageing of a Co-20% Ni metal-evaporated tape10.1002/sia.740200107 ↗
17. X-ray photoelectron studies on some oxides hydroxides of cobalt, nickel, and copper10.1021/ac60363a034 ↗
18. Anodic electrodepostion of conducting cobalt oxyhydroxide films on a gold surface. XPS study and electrochemical behaviour in neutral and alkaline solution10.1016/S0022-0728(99)00366-6 ↗
19. Formation and electronic properties of oxide and sulphide films of Co, Ni, Mo studied by XPS10.1016/S0368-2048(98)00292-8 ↗
20. X-ray photoelectron spectroscopic studies of thin film oxides of cobalt and molybdenum10.1002/sia.740150406 ↗
21. Mechanism of CoOOH thermal decomposition10.1016/0040-6031(79)85111-4 ↗