Hydrophobic ionic liquids based on the 1-butyl-3-methylimidazolium cation for lithium/seawater batteries
Source abstract
Abstract
Abstract Two hydrophobic ionic liquids (room temperature molten salts) based on 1-butyl-3-methylimidazolium cation (BMI + ), BMI + PF 6 − and BMI + Tf 2 N − , were used in developing a highly efficient lithium anode system for lithium/seawater batteries. The lithium anode system was composed of lithium metal/ionic liquid/Celgard membrane. Both BMI + PF 6 − and BMI + Tf 2 N − maintained high apparent anodic efficiency (up to 100%) under potentiostatic polarization (at +0.5 V versus open-circuit potential (OCP)) in a 3% NaCl solution. Eventually, traces of water contaminated the ionic liquid and a bilayer film (LiH and LiOH) on the lithium surface was formed, decreasing the rate of lithium anodic reaction and hence the discharge current density. BMI + Tf 2 N − prevented traces of water from reaching the lithium metal surface longer than BMI + PF 6 − (60 h versus 7 h). However, BMI + PF 6 − was better than BMI + Tf 2 N − in keeping a constant current density (∼0.2 mA cm −2 ) before the traces of water contaminated the lithium surface due to the non-reactivity of BMI + PF 6 − with the lithium metal that kept the bare lithium surface. During the discharge process, BMI + PF 6 − and BMI + Tf 2 N − acted as ion transport media of Li + , Cl − , OH − and H 2 O, but did not react with them because of the excellent chemical stability, high conductivity, and high hydrophobicity of these two ionic liquids. Both BMI + PF 6 − and BMI + Tf 2 N − gels were tentative approaches used to delay the traces of water coming in contact with the lithium surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ionic liquids properties and applications · Advanced Battery Materials and Technologies · Advancements in Battery Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Nazeeruddin · J. Am. Chem. Soc. · 1993 · 115 · 638210.1021/ja00067a063 ↗
2. Papageorgiou · J. Electrochem. Soc. · 1996 · 143 · 309910.1149/1.1837171 ↗
3. Fuller · J. Electrochem. Soc. · 1997 · 144 · 388110.1149/1.1838106 ↗
4. Koch · J. Electrochem. Soc. · 1996 · 143 · 79810.1149/1.1836540 ↗
5. Fuller · J. Electroanal. Chem. · 1998 · 459 · 2910.1016/S0022-0728(98)00285-X ↗
6. Nanjundiah · J. Electrochem. Soc. · 1997 · 144 · 339210.1149/1.1838024 ↗
7. Koel · Proc. Estonian Acad. Sci. Chem. · 2000 · 49 · 14510.3176/chem.2000.3.02 ↗
8. Hagiwara · J. Fluorine Chem. · 2000 · 105 · 22110.1016/S0022-1139(99)00267-5 ↗
9. Bonhote · Inorg. Chem. · 1996 · 35 · 116810.1021/ic951325x ↗
10. McFarlane · Electrochim. Acta · 2000 · 45 · 127110.1016/S0013-4686(99)00331-X ↗
11. Zhang · J. Power Sources · 2004 · 129 · 31210.1016/j.jpowsour.2003.11.058 ↗
12. Littauer · J. Electrochem. Soc. · 1978 · 125 · 84510.1149/1.2131566 ↗
13. Urquidi-Macdonald · Electrochim. Acta · 2001 · 47 · 83310.1016/S0013-4686(01)00764-2 ↗
14. Pensado-Rodríguez · J. Electrochem. Soc. · 1999 · 146 · 1302
15. Pensado-Rodríguez · J. Electrochem. Soc. · 1999 · 146 · 132610.1149/1.1391765 ↗
16. Celegard Inc. Website, http://www.celgard.com, last accessed 30 October 2002.
17. Y. Zhang, Low temperature molten salt membrane lithium/seawater battery. Master thesis. The Pennsylvania State University, 2002.
18. Aurbach · J. Power Sources · 1997 · 68 · 9110.1016/S0378-7753(97)02575-5 ↗
19. Aurbach · J. Power Sources · 1995 · 54 · 7610.1016/0378-7753(94)02044-4 ↗
20. Koch · J. Electrochem. Soc. · 1995 · 142 · L11610.1149/1.2044332 ↗
21. Thevenin · J. Electrochem. Soc. · 1987 · 134 · 265010.1149/1.2100266 ↗
22. Feliu · 1993 · 438
23. Electrochemical response of porous and rough surfaces
24. Kendig · Corros. Sci. · 1983 · 23 · 100710.1016/0010-938X(83)90027-6 ↗
25. Roberge · 1993 · 54
26. Jonscher · J. Phys. D: Appl. Phys. · 1999 · 32 · R5710.1088/0022-3727/32/14/201 ↗
27. Aurbach · Electrochim. Acta · 1999 · 45 · 113510.1016/S0013-4686(99)00312-6 ↗