journal article·2001-12

Comparison of different vehicle power trains

Peter Mizsey, Esmond Newson

Journal of Power Sources· Volume 102· Issue 1-2
Publisher page

Abstract

Abstract Four different alternatives of mobile power train developments (hybrid diesel, fuel cell operating with hydrogen produced on a petrochemical basis, methanol reformer-fuel cell system, gasoline reformer-fuel cell system), are compared with the gasoline internal combustion engine (ICE), for well-to-wheel efficiencies, CO 2 emissions, and investment costs. Although the ICE requires the lowest investment cost, it is not competitive in well-to-wheel efficiencies and less favourable than the above alternatives for CO 2 emissions. The hybrid diesel power train has the highest well-to-wheel efficiency (30%), but its well-to-wheel carbon dioxide emission is similar to that of the fuel cell power train operated with compressed hydrogen produced on a centralised petrochemical basis. This latter case, however, has the advantage over the hybrid diesel power train that the carbon dioxide emission is concentrated and easier to control than the several point-like sources of emissions. Among the five cases studied only the on-board reforming of methanol offers the possibility of using a renewable energy source (biomass).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electric Vehicles and Infrastructure · Vehicle emissions and performance · Hybrid Renewable Energy Systems

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Developing an infrastructure for hydrogen vehicles: a Southern California case study10.1016/S0360-3199(98)00131-1 ↗
2. A comparison of hydrogen, methanol and gasoline fuels for fuel cell vehicles: implications for the vehicle design and infrastructure development10.1016/S0378-7753(99)00057-9 ↗
3. Analysis of energy and water management in terms of fuel cell electricity generation10.1016/S0378-7753(97)02790-0 ↗
4. Golunski · Plat. Met. Rev. · 1998 · 42 · 210.1595/003214098X42127 ↗
5. E. Newson, P. Mizsey, T. Truong, P. Hottinger, The autothermal partial oxidation kinetics of methanol to produce hydrogen, in: Studies in Surface and Catalysis,Vol. 130, Elsevier, Amsterdam, 2000, pp. 695–700.10.1016/S0167-2991(00)81039-3 ↗
6. N. Edwards, et al., Fuel cell system for transport applications including on-board hotspot reformer, in: Proceedings of the 2nd IEA Advanced Fuel Cell Workshop, Wislikofen, Switzerland, 1997, p. 55.
7. E. Newson, et al., Catalyst screening for hydrogen production in mobile systems by the partial oxidation of methanol or hydrocarbons, in: I.C. Bolcich, T.N. Veziroglu (Eds.), Proceedings of the Hydrogen Energy Progress, XII, Vol. 2, 1998, p. 953.
8. P. Dietrich, Private communication, PSI, 1999.
9. F. Isenberg, Fuel cell car project of Daimler-Benz, Lecture at ABB, Dättwil, July 1999.
10. J. Gabriel, Fuel cells — threat or opportunity for the oil industry, in: Proceedings of the IAEE Energy Markets Conference, Berlin, 9 September 1998.
11. J.J.C. Geerlings, et al., Well-to-wheel efficiencies-an overview of options, in: Proceedings of the 2nd IEA Advanced Fuel Cell Workshop, Wislikofen, Switzerland, 1997, p. 31.
12. E. Erdmann, M. Grahl, Competitiveness of fuel cell electric vehicles, in: Proceedings of the IEA Implementing Agreement 026, Annex X Workshop, Wislikofen, Switzerland, 22–23 September 1999.
13. A. Röderer, Private communication, PSI, 1999.
14. C.E. Thomas, On future fuels: a comparison of options, HYFORUM 2000, C.-J. Winter (Ed.), On Energies-of-Change, Gerling Verlag, 2000, pp. 50–66.
15. B Hileman, Chem. Eng. News, (2000), pp. 39–41.10.1021/cen-v078n038.p039 ↗
16. L. Basini, et al., Catalytic partial oxidation of natural gas at elevated pressures and low residence time, Europ-Catl V., Rimini, Italy, 5–10 September 1999, O/01/03.