journal article·2026-09Open access

Exploring the effect of a GDC adhesion layer on the performance and durability of Ni-GDC fuel electrode supported solid oxide electrolysis cells

Albert Lopez de Moragas, Mona Yarahmadi, Morten Phan Klitkou, Adam William Hill, Julian Taubmann, Henrik Lund Frandsen, Peyman Khajavi

Abstract

Ni-GDC (Gadolinium-doped ceria) fuel electrode supported cells (FESC) are a promising alternative that could supersede Ni-GDC electrolyte supported cells (ESC) and Ni-YSZ FESC, given the perspectives of enhanced performance and long-term durability. One challenge in achieving competitive performance is the electrode-electrolyte interface. In this work, the reduction of the co-sintering temperature below 1300 °C and the addition of an adhesion layer (a layer between the fuel electrode and electrolyte) are used to improve the overall performance. Cells containing dense and porous adhesion GDC layers were fabricated and tested, demonstrating that a better interface contact reduces the interfacial polarization resistance associated with Ce-Zr interdiffusion. Additionally, a cell with a GDC fuel electrode was tested, showcasing high initial performance at 800 °C (0.38 Ω cm 2 ) for a nickel free functional layer. A cell with a dense GDC adhesion layer co-sintered at 1200 °C identified electronic conductivity of the support as a challenge when sintering at low temperatures. A long-term steam electrolysis test in galvanostatic mode at −0.5 A/cm 2 , unveiled a fast degradation rate (450 mV/kh) of a cell containing a dense GDC adhesion layer. The observed difference between this test and the long-term stability measured for Ni-GDC FESC without an adhesion layer warrants further analysis.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (98)

Show source-provided references
1. High temperature solid oxide electrolysis for green hydrogen production
2. Recent advances in solid oxide cell technology for electrolysis10.1126/science.aba6118 ↗
3. Wolf · 2023
4. Ultra-high efficiency hydrogen production using a large-scale solid oxide electrolysis cell system10.1016/j.ijhydene.2025.150283 ↗
5. Electrolysis of carbon dioxide in solid oxide electrolysis cells10.1016/j.jpowsour.2009.02.093 ↗
6. Graves · 2011
7. Ni/CGO-Based electrolyte-supported cells during co-Electrolysis: the role of feed gas impurities10.1149/10301.1129ecst ↗
8. Steam electrolysis vs. co-electrolysis: Mechanistic studies of long-term solid oxide electrolysis cells10.3390/en15155449 ↗
9. A comprehensive investigation of direct ammonia-fueled thin-film solid-oxide fuel cells: performance, limitation, and prospects10.1016/j.isci.2022.105009 ↗
10. Green ammonia production using current and emerging electrolysis technologies10.1016/j.rser.2024.114517 ↗
11. Dhawale · 2023
12. Corigliano · 2022
13. Energy analysis of a combined solid oxide fuel cell with a steam turbine power plant for marine applications10.1007/s11804-013-1219-5 ↗
14. Comparison of the solid oxide fuel cell system for micro CHP using natural gas with a system using a mixture of natural gas and hydrogen10.1016/j.apenergy.2019.01.039 ↗
15. Mogensen · 2019
16. Long-term experience with a 5/15kW-Class reversible solid oxide cell system10.1149/1945-7111/abdc79 ↗
17. The topsoe perspective: from electrode nanostructures to MW scaled SOEC systems10.1149/11106.1125ecst ↗
18. Progress of SOC development at elcogen10.1149/10301.0267ecst ↗
19. Elcogen – next generation solid oxide cell and stack technology10.1149/09101.0091ecst ↗
20. Sunfire industrial SOC stacks and modules10.1149/06801.0125ecst ↗
21. Status of stack & system development at sunfire
22. Status of stack & system development at sunfire10.1149/MA2021-031187mtgabs ↗
23. Solid oxide electrolysis cells – interplay between operating conditions, fuel electrode overpotential and degradation10.1016/j.ssi.2022.116127 ↗
24. Ni/YSZ electrodes structures optimized for increased electrolysis performance and durability10.1016/j.ssi.2016.06.003 ↗
25. Development of solid oxide electrolysis cells for hydrogen production at high Current densities10.1149/09101.2433ecst ↗
26. Influence of hydrogen electrode active layer thickness on electrochemical performance of solid oxide cell operating in electrolysis mode10.1149/1945-7111/acf20b ↗
27. Quantifying galvanostatic degradation of Sοlid oxide electrolysis cells: the onset of accelerated degradation of Ni-yttria stabilized zirconia electrode10.1016/j.jpowsour.2024.234490 ↗
28. The effect of operating temperature on galvanostatic operation of solid oxide electrolysis cells10.1149/11106.0429ecst ↗
29. Comparison of microstructural evolution of fuel electrodes in solid oxide fuel cells and electrolysis cells10.1016/j.jpowsour.2019.227599 ↗
30. Effect of the operating temperature on the degradation of solid oxide electrolysis cells10.1016/j.jpowsour.2024.234541 ↗
31. A parameter study of solid oxide electrolysis cell degradation: microstructural changes of the fuel electrode10.1016/j.electacta.2018.04.170 ↗
32. Degradation of Ni-YSZ electrodes in solid oxide cells: impact of polarization and initial microstructure on the Ni evolution10.1149/2.1261915jes ↗
33. Ni migration in solid oxide cell electrodes: review and revised hypothesis10.1002/fuce.202100072 ↗
34. Lifetime and performance of solid oxide electrolysis stacks and systems under different operation modes and conditions10.1016/j.ijhydene.2025.01.028 ↗
35. Schefold · 2024
36. 23,000 h steam electrolysis with an electrolyte supported solid oxide cell10.1016/j.ijhydene.2017.01.072 ↗
37. Long-term steam electrolysis with electrolyte-supported solid oxide cells10.1016/j.electacta.2015.04.141 ↗
38. Solid oxide electrolyser cell testing up to the above 30,000 h time range10.1149/09707.0553ecst ↗
39. 80,000 current On/Off cycles in a one year long steam electrolysis test with a solid oxide cell10.1016/j.ijhydene.2019.05.124 ↗
40. Microstructural comparison of solid oxide electrolyser cells operated for 6100 h and 9000 h10.1016/j.jpowsour.2014.10.188 ↗
41. X-ray nano-spectroscopy study of two solid oxide cells operated for long-term in steam electrolysis10.1016/j.jpowsour.2023.233410 ↗
42. Demonstration and scale-up of high-temperature electrolysis systems10.1002/fuce.202300059 ↗
43. Performance and degradation of electrolyte supported SOECs with advanced thin-film gadolinium doped ceria barrier layers in long-term stack test10.1149/1945-7111/ad4781 ↗
44. Analysis of the long-term operation of an electrolyte-supported solid oxide cell under Co-electrolysis regime10.1149/11106.1431ecst ↗
45. Experimental deconvolution of resistance contributions in commercial solid oxide cells with Ni-CGO electrode10.1016/j.electacta.2023.142672 ↗
46. Electrochemical characterization and modelling of anode and electrolyte supported solid oxide fuel cells10.3389/fenrg.2021.668964 ↗
47. Mathur · 2023
48. Strength of an electrolyte supported solid oxide fuel cell10.1016/j.jpowsour.2015.07.075 ↗
49. Manufacturing cost model for planar 5 kWel SOFC stacks at forschungszentrum jülich10.1016/j.ijhydene.2020.01.082 ↗
50. Development of fuel electrode supported solid oxide cell with Ni/CGO active layer10.1149/11106.1407ecst ↗
51. Phan · 2024
52. Interaction of a ceria-based anode functional layer with a stabilized zirconia electrolyte: considerations from a materials perspective10.1111/jace.15214 ↗
53. Interdiffusion at electrochemical interfaces between yttria-stabilized zirconia and doped ceria10.1016/j.jeurceramsoc.2023.06.015 ↗
54. Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: experimental investigation and kinetic modeling10.1016/j.jpowsour.2019.227152 ↗
55. Unraveling the pivotal role of heterointerfaces on oxide ion transport in solid oxide fuel cells10.1016/j.jpowsour.2023.233952 ↗
56. Solid oxide cells with zirconia/ceria Bi-Layer electrolytes fabricated by reduced temperature firing10.1039/C5TA01964H ↗
57. Cathode-electrolyte interfaces with CGO barrier layers in SOFC10.1111/j.1551-2916.2010.03763.x ↗
58. The relation of microstructure, materials properties and impedance of SOFC electrodes: a case study of Ni/GDC anodes10.3390/en13040987 ↗
59. Boosting intermediate temperature performance of solid oxide fuel cells via a tri-layer ceria–zirconia–ceria electrolyte10.1111/jace.18482 ↗
60. High-temperature degradation of tetragonal zirconia in solid oxide fuel and electrolysis cells: a critical challenge for long-term durability and a solution10.1016/j.jeurceramsoc.2024.04.042 ↗
61. Performance of IT-SOFC with Ce0.9Gd0.1O 1.95 functional layer at the interface of Ce0.9Gd 0.1O1.95 electrolyte and Ni-Ce0.9Gd 0.1O1.95 anode10.1002/fuce.200900005 ↗
62. Electrochemical and degradation behaviour of single cells comprising Ni-GDC fuel electrode under high temperature steam- and co-electrolysis conditions10.1016/j.jpowsour.2022.232436 ↗
63. Deconvolution of gas diffusion polarization in Ni/gadolinium-doped ceria fuel electrodes10.1149/10301.1375ecst ↗
64. Impact of nickel on the surface reaction in ceria-based electrodes for solid oxide cells10.1016/j.jpowsour.2024.235621 ↗
65. Krishnakumar
66. Performance and degradation of electrolyte supported SOECs with advanced GDC thin-film layers in long-term stack test10.1149/11106.2015ecst ↗
67. Boosting electrochemical performance via extra-role of La-Doped CeO2-δ interlayer for ‘Oxygen Provider’ at high-current SOFC operation
68. Accelerating the electrochemical performance of solid oxide fuel cells using a Ce(Gd, Bi, Yb)O2−d diffusion barrier layer acting as an oxygen reservoir at high-current loading conditions10.1039/D4TA06374K ↗
69. Reversible solid oxide electrochemical cells with regulated oxygen trapping nano-dots on Ni-Fe fuel electrode10.1016/j.cej.2024.158483 ↗
70. Defect equilibria and chemical expansion in non-stoichiometric undoped and gadolinium-doped cerium oxide10.1016/j.electacta.2008.09.026 ↗
71. Thermo-chemical expansion of SOFC materials10.1149/1.2215539 ↗
72. Evaluation of thin film ceria membranes for syngas membrane reactors-Preparation, characterization and testing10.1016/j.memsci.2010.12.012 ↗
73. Electro-chemo-mechanical analysis of a solid oxide cell based on doped ceria10.1016/j.jpowsour.2022.231505 ↗
74. Excellent kinetics of single-phase Gd-doped ceria fuel electrodes in solid oxide cells10.1039/D1MA00202C ↗
75. Gadolinium doped ceria as nickel–free fuel electrode in high temperature CO2-Electrolysis10.1002/celc.202300617 ↗
76. Performance, electrochemical process analysis and degradation of gadolinium doped ceria as fuel electrode material for solid oxide electrolysis cells10.1016/j.electacta.2023.142320 ↗
77. Fabrication framework for metal supported solid oxide cells via tape casting
78. Impact of Ni-GDC fuel electrode microstructure on cell performance in fuel electrode-supported solid oxide cells10.1016/j.jpowsour.2026.239854 ↗
79. Metal supported SOFCs for Mobile applications using hydrocarbon fuels10.1149/1945-7111/ab9b9d ↗
80. Microstructural characterization of SOFC Ni-YSZ anode composites by low-voltage scanning electron microscopy10.1016/j.ssi.2007.12.075 ↗
81. Stability of La0.6Sr0.4Co0.2Fe0.8O3/Ce0.9Gd0.1O2 cathodes during sintering and solid oxide fuel cell operation10.1016/j.jpowsour.2015.02.064 ↗
82. Sakurada · 2005
83. Investigating viability of low temperature co-sintering to produce Ni-YSZ supported solid oxide electrolysis cells with a Ni-GDC active layer10.1016/j.apenergy.2025.126547 ↗
84. de Moragas · 2025
85. Advanced insights into gas conversion and diffusion impedance of solid oxide cells by 2D multi-physics modelling10.1016/j.jpowsour.2023.233739 ↗
86. Enhancement of performance and sulfur tolerance of ceria-based fuel electrodes in low temperature SOFC10.1149/1945-7111/ad3ebd ↗
87. Electrical and ionic conductivity of Gd-Doped ceria10.1149/199919.0193PV ↗
88. Electrochemical impedance analysis and degradation behavior of a Ni-GDC fuel electrode containing single cell in direct CO2 electrolysis10.1016/j.jcou.2023.102423 ↗
89. Highly active and thermally stable single-atom catalysts for high-temperature electrochemical devices10.1039/D0EE01680B ↗
90. Structure and Ionic Conductivity of Solid Solutions in the System 0"9{(ZrOz)l_-(CeOz) }-0"l(Y203)10.1016/0955-2219(90)90044-G ↗
91. Improved ionic conductivity of zirconia-scandia with niobia addition10.1016/j.ceramint.2017.05.131 ↗
92. Enhanced ionic conductivity of scandia-ceria-stabilized-zirconia (10Sc1CeSZ) electrolyte synthesized by the microwave-assisted glycine nitrate process10.1016/j.ceramint.2017.03.135 ↗
93. P. Elahi, E. Winterholler, and T. D. Sparks, “The Influence of Sintering Condition on Microstructure, Phase Composition, and Electrochemical Performance of the scandia-ceria-co-doped Zirconia for Sofcs”.
94. Studies on ionic conductivity of stabilized zirconia ceramics (8YSZ) densified through conventional and non-conventional sintering methodologies10.1016/j.ceramint.2011.05.151 ↗
95. Gadolinia-doped ceria and yttria stabilized zirconia interfaces: regarding their application for SOFC technology10.1016/S1359-6454(00)00261-5 ↗
96. Generalised equivalent circuits for mass and charge transport: chemical capacitance and its implications10.1039/b100180i ↗
97. Structural characterization and oxygen nonstoichiometry of ceria-zirconia (Ce1-xZrxO2-δ) solid solutions10.1016/j.actamat.2013.04.001 ↗
98. The role of point defects in the physical properties of nonstoichiometric ceria10.1063/1.2559601 ↗