Challenges in the reliable detection of lithium plating using dynamic electrochemical impedance spectroscopy
Source abstract
Abstract
Fast charging of lithium-ion batteries is strongly limited by the risk of lithium plating, which accelerates aging and compromises safety. While electrochemical impedance spectroscopy has been widely explored for plating detection, significant challenges regarding its practical reliability and signal interpretation remain insufficiently addressed. Three commercially available 18650 lithium-ion cell types representing both high-energy and high-power designs are examined. Therefore, an experimental setup with single-sine and multi-sine excitation was developed to analyze the dynamic impedance under different excitation signals, C-rates, and temperatures. The evolution of impedance is evaluated in conjunction with voltage relaxation behavior to identify characteristic features associated with lithium plating. Additionally, post-mortem analysis of cells subjected to extended fast-charging indicates that unambiguous identification of lithium plating under extreme conditions remains challenging. Higher-order derivatives of the impedance are assessed as potential mathematical metrics for plating detection. However, a sensitivity analysis reveals that the accuracy of the metrics depends on signal quality and post-processing parameters, leading to shifts in the suspected plating onset or the introduction of artifacts. Consequently, robust signal post-processing is essential to ensure the reliability and accuracy of impedance-based plating detection.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Jossen · 2019
2. Lithium-ion battery fast charging: A review10.1016/j.etran.2019.100011 ↗
3. Analysis and detection of lithium deposition after fast charging of lithium-ion batteries by investigating the impedance relaxation10.1016/j.jpowsour.2021.230009 ↗
4. TÜV-Verband e.V. · 2024
5. Bundesverband der Energie- und Wasserwirtschaft e.V. · 2020
6. 2025
7. A review on design parameters for the full-cell lithium-ion batteries10.3390/batteries10100340 ↗
8. Cost modeling of lithium–ion battery cells for automotive applications10.1002/ese3.47 ↗
9. Lithium plating in commercial lithium-ion cells: An extensive study combining electrical methods with post-mortem analysis10.1016/j.est.2025.117706 ↗
10. Operando detection of li plating during fast charging of li-ion batteries using incremental capacity analysis10.1016/j.jpowsour.2022.231601 ↗
11. Degradation diagnostics for lithium ion cells10.1016/j.jpowsour.2016.12.011 ↗
12. Mechanistic modeling of li plating in lithium-ion batteries10.1016/j.jpowsour.2021.230936 ↗
13. Investigation of lithium plating-stripping process in li-ion batteries at low temperature using an electrochemical model10.1149/2.0661810jes ↗
14. Quantitative and time-resolved detection of lithium plating on graphite anodes in lithium ion batteries10.1016/j.mattod.2017.11.001 ↗
15. Low-temperature charging and aging mechanisms of Si/C composite anodes in li-ion batteries: An operando neutron scattering study10.1002/cssc.201903139 ↗
16. Fast charging of li-ion cells: Part I. Using Li/Cu reference electrodes to probe individual electrode potentials10.1149/2.0401906jes ↗
17. Model-based health-aware fast charging to mitigate the risk of lithium plating and prolong the cycle life of lithium-ion batteries in electric vehicles10.1016/j.jpowsour.2022.232586 ↗
18. Interplay of operational parameters on lithium deposition in lithium-ion cells: Systematic measurements with reconstructed 3-electrode pouch full cells10.1149/2.0591607jes ↗
19. Nondestructive detection, characterization, and quantification of lithium plating in commercial lithium-ion batteries10.1016/j.jpowsour.2013.12.060 ↗
20. Lithium plating in a commercial lithium-ion battery – A low-temperature aging study10.1016/j.jpowsour.2014.11.065 ↗
21. Plating onset detection and optimized charging profiles for lithium- and sodium-ion batteries10.1016/j.electacta.2025.146703 ↗
22. In operando detection of lithium plating via electrochemical impedance spectroscopy for automotive batteries10.1016/j.jpowsour.2023.233366 ↗
23. Unlocking the full potential of electric vehicle fast-charging over lifetime through model-based aging adaptation10.1016/j.est.2024.113361 ↗
24. Online adaptive anode potential-controlled fast charging of lithium-ion cells using a validated electrochemical model-based virtual reference electrode10.1016/j.jpowsour.2024.234620 ↗
25. Review of fast charging strategies for lithium-ion battery systems and their applicability for battery electric vehicles10.1016/j.est.2021.103306 ↗
26. Lithium-ion battery thermal-electrochemical model-based state estimation using orthogonal collocation and a modified extended Kalman filter10.1016/j.jpowsour.2015.07.019 ↗
27. Review of simplified pseudo-two-dimensional models of lithium-ion batteries10.1016/j.jpowsour.2016.07.036 ↗
28. A single particle model for lithium-ion batteries with electrolyte and stress-enhanced diffusion physics10.1149/2.1541704jes ↗
29. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗
30. Electrochemical impedance correlation analysis for the estimation of li-ion battery state of charge, state of health and internal temperature10.1016/j.est.2022.104608 ↗
31. Impedance-based battery management system for safety monitoring of lithium-ion batteries10.1109/TIE.2017.2786199 ↗
32. Review—Use of impedance spectroscopy for the estimation of li-ion battery state of charge, state of health and internal temperature10.1149/1945-7111/ac1a85 ↗
33. 2018
34. Application of electrochemical impedance spectroscopy to commercial li-ion cells: A review10.1016/j.jpowsour.2020.228742 ↗
35. Application of time-resolved multi-Sine impedance spectroscopy for lithium-ion battery characterization10.3390/batteries4040064 ↗
36. BioLogic · 2023
37. Electrochemical impedance spectroscopy beyond linearity and stationarity—A critical review10.1016/j.electacta.2023.142939 ↗
38. Fast state of charge estimation for lithium-ion battery based on electrochemical impedance spectroscopy frequency feature extraction
39. State of health (SOH) assessment for LIBs based on characteristic electrochemical impedance10.1016/j.jpowsour.2024.234386 ↗
40. Operando determination of lithium-ion cell temperature based on electrochemical impedance features10.1016/j.jpowsour.2024.235036 ↗
41. Impedance-based thermal runaway detection and temperature estimation for single and parallel connected large-format automotive lithium-ion batteries10.1016/j.etran.2025.100424 ↗
42. Multi-cell testing topologies for defect detection using electrochemical impedance spectroscopy: A combinatorial experiment-based analysis10.3390/batteries9080415 ↗
43. A new on-line method for lithium plating detection in lithium-ion batteries10.1016/j.jpowsour.2020.227798 ↗
44. Impedance-based online detection of lithium plating for lithium-ion batteries: Mechanism and sensitivity analysis10.1016/j.electacta.2024.144512 ↗
45. Online detection of lithium plating onset during constant and multistage constant current fast charging for lithium-ion batteries10.1016/j.apenergy.2024.123631 ↗
46. Lithium plating detection using dynamic electrochemical impedance spectroscopy in lithium-ion batteries10.1016/j.jpowsour.2021.230508 ↗
47. Detecting onset of lithium plating during fast charging of li-ion batteries using operando electrochemical impedance spectroscopy
48. Understanding lithium deposition in lithium-ion batteries: The link between impedance results and electrochemical behavior10.1149/1945-7111/ae0073 ↗
49. Detecting the onset of lithium plating and monitoring fast charging performance with voltage relaxation10.1021/acsenergylett.0c00831 ↗
50. Identification of degradation mechanisms by post-mortem analysis for high power and high energy commercial li-ion cells after electric vehicle aging10.3390/batteries7030048 ↗
51. Model-based fast charging of lithium-ion batteries: Impact of thermal gradients on the degradation of parallel-connected cells
52. Samsung SDI Co. · 2015
53. Samsung SDI Co. · 2012
54. TerraE · 2021
55. Voltage relaxation and impedance spectroscopy as in-operando methods for the detection of lithium plating on graphitic anodes in commercial lithium-ion cells10.1016/j.jpowsour.2015.11.044 ↗
56. How observable is lithium plating? Differential voltage analysis to identify and quantify lithium plating following fast charging of cold lithium-ion batteries10.1149/2.0821904jes ↗
57. Feasibility assessment of differential voltage analysis to detect lithium plating in battery modules for electric vehicles
58. Fast charging of lithium-ion batteries at all temperatures10.1073/pnas.1807115115 ↗
59. Experimental degradation study of a commercial lithium-ion battery10.1016/j.jpowsour.2022.232498 ↗
60. Analyzing and mitigating battery ageing by self-heating through a coupled thermal-electrochemical model of cylindrical li-ion cells10.1016/j.est.2021.102648 ↗
61. Electrolyte motion induced salt inhomogeneity – a novel aging mechanism in large-format lithium-ion cells10.1039/D4EE03211J ↗
62. Influence of the C-rate on the electrolyte motion induced salt inhomogeneity (EMSI) effect in a commercially available 18650 lithium-ion battery cell10.1149/1945-7111/ae63fe ↗
63. In-operando measurement of temperature gradients in cylindrical lithium-ion cells during high-current discharge10.1149/2.0031501eel ↗
64. A quick on-line state of health estimation method for li-ion battery with incremental capacity curves processed by Gaussian filter10.1016/j.jpowsour.2017.10.092 ↗
65. Best practices for incremental capacity analysis10.3389/fenrg.2022.1023555 ↗