journal article·2026-08Open access

Prediction of MEA degradation in fuel cells for heavy-duty vehicle applications based on driving cycle analysis and component-specific accelerated stress testing

Lena Birkner, Paula Anderle, Lisa Büttner, Sarah Loy, Florian Schmalzl, Cheng Sun, Michael Foreta, Marc-Georg Willinger, Maik Eichelbaum

Abstract

To estimate the lifetime of polymer-electrolyte membrane fuel cells (PEMFCs) in heavy-duty vehicles (HDVs), a deep understanding of degradation mechanisms under realistic operating conditions is essential. We developed two different accelerated stress tests (AST) for HDVs: (1) The “All Component Aging Test” (ACAT) is based on a synthetic voltage, temperature and humidity profile to equally stress all components of the membrane electrode assembly (MEA). (2) The “Truck Driving Cycle Test” (TDCT) is based on real HDV driving data and applies moderate voltage, temperature, and humidity conditions as well as elevated differential pressure. Additionally, standardized U.S. Department of Energy (DoE) component-specific aging tests were performed for comparison. A commercial HDV MEA was subjected to all aging protocols. As a result, the MEA’s end-of-life (EoL) was reached in the ACAT after 2100 h due to catalyst layer degradation. In contrast, the lifetime determining factor in the TDCT (EoL after 1500 h) was membrane degradation. Interestingly, the DoE tests predicted the aging of the catalyst layer as lifetime-limiting, but did not identify the membrane as critical component. These findings demonstrate that standardized test protocols alone are no adequate substitution of application-specific ASTs to estimate the real-world durability of PEMFC MEA components.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electric and Hybrid Vehicle Technologies · Advanced Combustion Engine Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. European Parliament and Council of the European Union · 2021
2. Transport
3. O’Connell · 2023
4. PEM Fuel Cell Applications in Road Transport10.3390/en16176129 ↗
5. A Review of Fuel Cell Powertrains for Long-Haul Heavy-Duty Vehicles: Technology, Hydrogen, Energy and Thermal Management Solutions10.3390/en15249557 ↗
6. Hydrogen fuel cell heavy-duty trucks: Review of main research topics10.1016/j.ijhydene.2022.06.271 ↗
7. Simultaneous accelerated stress testing of membrane electrode assembly components in polymer electrolyte fuel cells10.1038/s41529-024-00524-z ↗
8. European Commission, Directorate-General for Energy · 2020
9. Economic, business, technical, and commercialization hindrances for the polymer electrolyte membrane fuel cell
10. Automotive applications of PEM technology
11. Materials, technological status, and fundamentals of PEM fuel cells – a review10.1016/j.mattod.2019.06.005 ↗
12. (Invited) Fuel Cell Component Durability for Million Mile Fuel Cell Trucks10.1149/MA2023-02371772mtgabs ↗
13. A review of accelerated stress tests dedicated to proton exchange membrane fuel cells – Part I: Fuel cell component level10.1016/j.jpowsour.2022.231895 ↗
14. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
15. Degradation mechanisms, long-term durability challenges, and mitigation methods for proton exchange membranes and membrane electrode assemblies with pt/c electrocatalysts in low-temperature and high-temperature fuel cells: A comprehensive review
16. Durability and performance analysis of polymer electrolyte membranes for hydrogen fuel cells by a coupled chemo-mechanical constitutive model and experimental validation10.1021/acsami.2c15451 ↗
17. Accelerated testing and lifetime modeling for the development of durable fuel cell MEAs10.1149/1.2214556 ↗
18. Benjamin · 2017 · 38
19. Cooper · 2017
20. Dynamic accelerated stress test and coupled on-line analysis program to elucidate aging processes in proton exchange membrane fuel cells10.1038/s41598-024-54258-8 ↗
21. Control and purge strategies for hydrogen supply subsystem of proton exchange membrane fuel cell system10.1016/j.ijhydene.2025.150050 ↗
22. Pressure and Temperature Dependence of the Hydrogen Oxidation and Evolution Reaction Kinetics on Pt Electrocatalysts via PEMFC-based Hydrogen-Pump Measurements10.1149/1945-7111/ac099c ↗
23. Durability test of PEMFC with pt-PFSA composite membrane10.1016/j.ijhydene.2011.03.094 ↗
24. Application of the ce-based radical scavengers in proton exchange membrane fuel cells10.1016/j.ijhydene.2024.05.393 ↗
25. Main degradation mechanisms of polymer electrolyte membrane fuel cell stacks – Mechanisms, influencing factors, consequences, and mitigation strategies10.1016/j.ijhydene.2023.06.215 ↗
26. Dissolution of Platinum in the Operational Range of Fuel Cells10.1002/celc.201500098 ↗
27. Physical Modeling of Catalyst Degradation in Low Temperature Fuel Cells: Platinum Oxidation, Dissolution, Particle Growth and Platinum Band Formation10.1149/2.0232001JES ↗
28. Physical Theory of Platinum Nanoparticle Dissolution in Polymer Electrolyte Fuel Cells10.1021/jp9101509 ↗
29. Dissolution and migration of platinum after long-term operation of a polymer electrolyte fuel cell under various conditions10.1016/j.jpowsour.2008.05.062 ↗
30. Applicability of Platinum as a Counter-Electrode Material in Electrocatalysis Research10.1021/acscatal.1c06040 ↗
31. Metal-oxide phase transition of platinum nanocatalyst below fuel cell open-circuit voltage10.1038/s41467-024-55299-3 ↗
32. Simulation of cathode catalyst durability under fuel cell vehicle operation–effects of stack size and temperature10.1016/j.jpowsour.2023.233820 ↗
33. Revealing in-plane movement of platinum in polymer electrolyte fuel cells after heavy-duty vehicle lifetime10.1038/s41929-023-00993-6 ↗
34. The effect of ionomer to carbon ratio and relative humidity on cathode catalyst degradation in PEM fuel cells10.1149/1945-7111/acff1f ↗
35. Voltage Cycling-Induced Pt Degradation in Proton Exchange Membrane Fuel Cells: Effect of Cycle Profiles10.1021/acsami.0c09883 ↗
36. Experimental investigation on degradation mechanism of membrane electrode assembly at different humidity under automotive protocol10.1016/j.cjche.2022.07.035 ↗
37. Main degradation mechanisms of polymer electrolyte membrane fuel cell stacks – Mechanisms, influencing factors, consequences, and mitigation strategies10.1016/j.ijhydene.2023.06.215 ↗
38. Observation of Interface Between Pt Electrode and Nafion Membrane10.1149/1.1531970 ↗
39. Electrochemical characterization of evolving ionomer/electrocatalyst interactions throughout accelerated stress tests10.1016/j.jpowsour.2022.232490 ↗
40. Insight into carbon corrosion of different carbon supports for pt-based electrocatalysts using accelerated stress tests in polymer electrolyte fuel cells10.1016/j.jpowsour.2022.232209 ↗
41. Carbon corrosion mechanism and mitigation strategies in a proton exchange membrane fuel cell (PEMFC): A review10.1016/j.jpowsour.2020.229434 ↗
42. Effect of Carbon Support Characteristics on Fuel Cell Durability in Accelerated Stress Testing10.1149/1945-7111/abf265 ↗
43. Effects of carbon corrosion on proton exchange membrane fuel cell performance using two durability evaluation methods10.1016/j.renene.2022.04.015 ↗
44. Carbon Corrosion in PEM Fuel Cells and the Development of Accelerated Stress Tests10.1149/2.0061806jes ↗
45. Carbon Corrosion in Proton-Exchange Membrane Fuel Cells: Effect of the Carbon Structure, the Degradation Protocol, and the Gas Atmosphere10.1021/cs501973j ↗
46. Review: durability and degradation issues of PEM fuel cell components
47. Numerical study of gas crossover effect on hydrogen-oxygen proton exchange membrane fuel cell10.1016/j.ijheatmasstransfer.2024.126060 ↗
48. Assessing Open Circuit Voltage Losses in PEMFCs: A New Methodological Approach10.3390/en17112785 ↗
49. Current understanding of chemical degradation mechanisms of perfluorosulfonic acid membranes and their mitigation strategies: a review10.1039/C7SE00038C ↗
50. Degradation mechanisms of proton exchange membrane fuel cell under typical automotive operating conditions10.1016/j.pecs.2020.100859 ↗
51. Nafion degradation mechanisms in proton exchange membrane fuel cell (PEMFC) system: A review10.1016/j.ijhydene.2021.06.032 ↗
52. Accelerated Stress Testing of Fuel Cell Membranes Subjected to Combined Mechanical/Chemical Stressors and Cerium Migration10.1149/2.0241806jes ↗
53. Membrane degradation in PEM fuel cells: From experimental results to semi-empirical degradation laws10.1016/j.ijhydene.2017.02.116 ↗
54. Hydrogen crossover and internal short-circuit currents experimental characterization and modelling in a proton exchange membrane fuel cell10.1016/j.ijhydene.2014.06.157 ↗
55. Performance investigation of proton exchange membrane fuel cells with curved membrane electrode assemblies caused by pressure differences between cathode and anode10.1016/j.ijhydene.2021.09.005 ↗
56. Mechanical degradation of proton exchange membrane along the MEA frame in proton exchange membrane fuel cells10.1016/j.energy.2018.09.136 ↗
57. Research progress of proton exchange membrane failure and mitigation strategies10.3390/ma14102591 ↗
58. Perfluorinated sulfonic acid ionomer degradation after a combined chemical and mechanical accelerated stress test to evaluate membrane durability for polymer electrolyte fuel cells10.1016/j.ijhydene.2024.11.319 ↗
59. PEMFC anode durability: innovative characterization methods and further insights on OER based reversal tolerance10.1149/1945-7111/abe50b ↗
60. Carbon corrosion behaviors and the mechanical properties of proton exchange membrane fuel cell cathode catalyst layer10.1016/j.ijhydene.2020.06.170 ↗
61. Carbon support corrosion in PEMFCs followed by identical location electron microscopy10.1021/acscatal.4c00417 ↗
62. Similarities and differences between internal short-circuit current and hydrogen crossover current in a proton exchange membrane fuel cell10.1016/j.cej.2024.153091 ↗
63. Spatially Resolved Differentiation of Functional Degradation and Perforating Structural Defects in Membrane Electrode Assemblies Using Diffusion-Cell Coupled DC-SECM10.1021/acsmeasuresciau.5c00071 ↗
64. Membrane degradation during combined chemical and mechanical accelerated stress testing of polymer electrolyte fuel cells10.1016/j.jpowsour.2014.01.106 ↗
65. Research on anode pressure control and dynamic performance of proton-exchange membrane fuel cell system for vehicular application10.1016/j.fuel.2023.130219 ↗
66. PEMFC electrochemical degradation analysis of a fuel cell range-extender (FCREx) heavy goods vehicle after a break-in period10.3390/en17122980 ↗