journal article·2026-06Open access

Recovery of proton-conducting functionality of thermally degraded Nafion membranes via sulfuric acid treatment

Hyun Mi Kim, Yujin Son, Euntaek Oh, Eunsong Kim, Ryeo Yun Hwang, Jonghyun Hyun, Yoo Jin Lee, Chaeyeon Park, Jong Sung Bae, Hee-Tak Kim, Oc Hee Han

Abstract

Nafion membrane activation, or pretreatment, involves immersion in a hot sulfuric acid solution to improve proton conductivity by replacing non-proton X + ions in –SO 3 X groups with H + ions. This study demonstrates that nonacidic –CF 2 H terminal groups, formed during the thermal degradation of Nafion membranes, can also be converted to acidic –CF 2 SO 3 H groups through sulfuric acid treatment. The –CF 2 H signals were quantitatively measured using 1 H magic angle spinning nuclear magnetic resonance spectroscopy to estimate the degree of –SO 3 H group detachment and the extent of its recovery. The disappearance of these signals directly correlated with the recovery of the proton conductivity, the spin–lattice relaxation time of 1 H signals, X-ray photoelectron spectroscopy, ion exchange capacity, and water uptake data. These findings indicate that –SO 3 H groups can be regenerated by substituting the nonacidic hydrogen in terminal groups such as –CF 2 H with –SO 3 H groups, and that simple immersion in an H 2 SO 4 solution at 80 °C is an effective method for restoring thermally degraded perfluorosulfonic acid membranes. Single–cell polymer electrolyte membrane fuel cell measurements showed that the electrochemical performance of thermally degraded membranes was largely restored after sulfuric acid treatment, and further indicated that this treatment is effective even for chemically degraded membranes. Thermally degraded Nafion membranes were restored through immersing in a hot H 2 SO 4 solution, which replaced the nonacidic H of –CF 2 H with acidic –SO 3 H groups. The recovery of acid-treated PEM was confirmed with PEMFC single-cell performance. • H 2 SO 4 treatment reproduced –SO 3 H by replacing the nonacidic H of –CF 2 H with –SO 3 H. • 1 H NMR signals for –CF 2 H were used to estimate degradation and restoration. • Nafion membranes were recovered by immersing in 1 M H 2 SO 4 solutions at 80 °C. • The recovery of acid-treated PEMs was confirmed with PEM PEMFC performance. • Our results offer a new direction for PFSA PEM regeneration.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advancements in Solid Oxide Fuel Cells · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. Effects of hydrothermal/thermal treatments on the water-uptake ofNafion membranes and relations with changes of conformation, counter-elastic force and tensile modulus of the matrix10.1016/j.jpowsour.2007.09.034 ↗
2. Conductivity of Nafion® 117 membrane used in polymer electrolyte fuel cells10.1016/j.ijhydene.2013.12.066 ↗
3. Sulfonated PEEK-based polymers in PEMFC and DMFC applications: a review10.1016/j.ijhydene.2012.07.063 ↗
4. Highly ion conductive ion solvating membranes for durable alkaline water electrolysis at low temperature and voltage10.1039/D4TA02511C ↗
5. Enzyme-inspired formulation of the electrolyte for stable and efficient vanadium redox flow batteries at high temperatures10.1021/acsami.9b06790 ↗
6. NMR contributions to the study of water transfer in proton exchange membranes for fuel cells10.2516/stet/2024013 ↗
7. Investigation on degradation mechanism of hydrogen–oxygen proton exchange membrane fuel cell under current cyclic loading
8. Time-resolved monitoring of composite Nafion™ XL membrane degradation induced by Fenton's reaction
9. Liquid chromatography/mass spectrometry analysis of effluent water from PFSA membrane fuel cells operated at OCV10.1149/1945-7111/abe56a ↗
10. 1H NMR spectroscopy of degraded perfluorosulfonic acid membranes: a simple methodology for detecting onset of degradation
11. The effect of humidity on the degradation of Nafion® membrane10.1016/j.polymdegradstab.2009.05.016 ↗
12. Recent development in degradation mechanisms of proton exchange membrane fuel cells for vehicle applications: problems, progress, and perspectives10.1016/j.enss.2024.02.005 ↗
13. Performance and degradation analysis of low and high equivalent weight short side chain PFSA membranes in PEMFCs10.1021/acsaem.4c02241 ↗
14. Behavior of channel water and CF2H side-chain terminal groups in swollen nafion polymer electrolyte membranes after thermal treatment10.1021/acsmacrolett.6b00388 ↗
15. NMR evaluation of polystyrene nanocomposites degradated by repeated extrusion processing10.1016/j.polymdegradstab.2015.03.022 ↗
16. Mechanical failure and mitigation strategies for the membrane in a proton exchange membrane fuel cell10.1016/j.rser.2019.109289 ↗
17. Perpendicularly stacked array of PTFE nanofibers as a reinforcement for highly durable composite membrane in proton exchange membrane fuel cells10.1016/j.nanoen.2022.107581 ↗
18. Recovery, regeneration, and reapplication of PFSA polymer from end-of-life PEMFC MEAs10.1021/acsami.3c11186 ↗
19. Insights into the influence of different pre-treatments on physicochemical properties of Nafion XL membrane and fuel cell performance10.3390/polym14163385 ↗
20. Effect of various concentration of sulfuric acid for Nafion membrane activation on the performance of fuel cell
21. Effects on Nafion® 117 membrane using different strong acids in various concentrations10.14447/jnmes.v16i3.4 ↗
22. Effect of acid treatment on the physico-chemical properties of Nafion 117 membrane10.1016/j.ijhydene.2022.04.246 ↗
23. Measuring the water content of polymer electrolyte membranes using double points of proton magic angle spinning nuclear magnetic resonance data10.1016/j.polymer.2024.127431 ↗
24. Performance recovery of proton exchange membrane electrolyzer degraded by metal cations contamination10.1016/j.ijhydene.2023.12.049 ↗
25. Magnetic field-induced through-plane alignment of the proton highway in a proton exchange membrane10.1021/acsaem.0c00289 ↗
26. The effect of different environments on Nafion degradation: Quantum mechanics study10.1016/j.memsci.2013.02.060 ↗
27. Water dynamics and proton transfer in Nafion fuel cell membranes10.1021/la703358a ↗
28. Molecular motion and dynamics of water in polymeric film explored by benchtop Nuclear Magnetic Resonance10.1016/j.memsci.2025.123958 ↗
29. Comprehensive picture of water dynamics in Nafion membranes at different levels of hydration10.1021/acs.jpcb.9b05093 ↗
30. Mapping microscale chemical heterogeneity in Nafion membranes with X-ray Photoelectron spectroscopy10.1149/2.0771811jes ↗
31. Decomposition of perfluoropolyethers during XPS measurements10.1016/0169-4332(91)90097-4 ↗
32. Surface chemical analysis of poly(ε‐caprolactone)–perfluoropolyether–poly(ε‐caprolactone) triblock copolymers by X‐ray photoelectron spectroscopy10.1002/pi.1184 ↗
33. X-ray Photoelectron spectroscopy analysis of Nafion-containing samples: pitfalls, protocols, and perceptions of physicochemical properties10.1021/acs.jpcc.4c00872 ↗
34. XPS investigation of Nafion® membrane degradation10.1016/j.jpowsour.2007.03.037 ↗
35. Conductivity and wettability changes of ultrathin Nafion films subjected to thermal annealing and liquid water exposure10.1021/jp410510x ↗
36. Cross-linked sulfonated poly(phathalazinone ether ketone)s for PEM fuel cell application as proton-exchange membrane10.1016/j.jpowsour.2006.11.028 ↗
37. Preparation and characterization of high-durability zwitterionic crosslinked proton exchange membranes10.1016/j.memsci.2010.06.004 ↗
38. Short-side-chain proton conducting perfluorosulfonic acid ionomers: why they perform better in PEM fuel cells10.1016/j.jpowsour.2007.11.011 ↗
39. Advanced performance and ultra-high, long-term durability of acid-base blended membranes over 900 hours containing sulfonated PEEK and quaternized poly(arylene ether sulfone) in H2/O2 fuel cells
40. Metal organic framework–derived, N–C–SO3H/COOH–incorporated, phenolphthalein-based propyl sulfonated poly(arylene ether) composite membranes for proton exchange membranes in fuel cells10.1016/j.memsci.2025.124555 ↗
41. Ion-pair membrane based on imidazolium-functionalized Poly(pentafluorostyrene) for high-temperature proton exchange membrane fuel cell application10.1021/acsaem.3c02854 ↗
42. Development of polymer composite membranes with hydrophilic TiO2 nanoparticles and perfluorosulfonic acid-based electrolyte for polymer electrolyte fuel cells operating over a wide temperature range10.1021/acsaem.3c01721 ↗