Wireless powered asymmetric textile supercapacitors for continuous supply of energy in smart wearable systems
Source abstract
Abstract
We developed an autonomous energy supply system for wearables using radio-frequency (RF) wireless power transfer (WPT) integrated with a textile supercapacitor (TSC) and implemented it in a helmet. For this, we initially developed a new interdigitated electrode-based TSC using a metal oxide/graphene composite. The electrochemical characterisations show that the developed TSC exhibits an excellent specific capacitance of 72 mF cm −2 at a scan rate of 1 mV s- 1 . Further galvanostatic charging-discharging analysis reveals that at a current density of 0.277 mA cm −2 , the TSC exhibits a specific capacitance of 16.8 mF cm −2 , and the TSC device retains 72.7% of its capacity after 3000 cycles. For a continuous energy supply, we designed an RF energy harvesting system incorporating a rectenna with a dipole receiving antenna and a voltage doubler rectifying circuit. The integration of TSC with WPT reveals that the rectenna's ability to harvest energy at and stored in TSC. The stored energy was used to directly power a red LED at 1.72 V and 4.8 mA. Illumination lasted 7.2 s, during which 89.2 mJ was delivered, giving a discharge efficiency of 97.3%. The integrated TSC with WPT offered the advantage of wearability in remote environmental and sports/healthcare applications. • Development of energy autonomous systems using supercapacitor and WPT. • Textile supercapacitor developed and exhibited capacitance of 72 mF cm −2 . • For a continuous energy supply, we designed an RF energy harvesting system. • WPT with energy storage offered in remote environmental and sports/healthcare applications.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advanced Sensor and Energy Harvesting Materials · Innovative Energy Harvesting Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Alternative power sources for remote sensors: a review10.1016/j.jpowsour.2013.06.081 ↗
2. Small-scale unmanned aerial vehicles in environmental remote sensing: challenges and opportunities10.2747/1548-1603.48.1.99 ↗
3. A review on the lithium-ion battery problems used in electric vehicles
4. Energy autonomous sweat-based wearable systems10.1002/adma.202100899 ↗
5. Hybrid multimodal wearable sensors for comprehensive health monitoring10.1038/s41928-024-01247-4 ↗
6. Smart wearable sensors for health and lifestyle monitoring: commercial and emerging solutions10.1149/2754-2726/ad3561 ↗
7. 3-D position optimization of solar-powered hovering UAV relay in optical wireless backhaul
8. The development of a dynamic model to investigate the dielectric layer thickness effect for device performance in triboelectric nanogenerators10.1109/TED.2019.2933697 ↗
9. Thermoelectric generator with boost converter as a portable power source for battery charging10.1109/TCPMT.2025.3543258 ↗
10. Recent advances of triboelectric, piezoelectric and pyroelectric nanogenerators10.1016/j.nanoso.2023.100990 ↗
11. A flexible and wearable epidermal ethanol biofuel cell for on-body and real-time bioenergy harvesting from human sweat10.1016/j.nanoen.2021.106061 ↗
12. Grid integration challenges and solution strategies for solar PV systems: a review10.1109/ACCESS.2022.3174555 ↗
13. Recent advances in triboelectric nanogenerators: mechanism, rational designing and applications
14. Ambient energy harvesters in wearable electronics: fundamentals, methodologies, and applications10.1186/s12951-024-02774-0 ↗
15. Energy and time optimal autopilot for electric vehicles performing Ackerman cornering10.1109/TITS.2022.3159747 ↗
16. 2D metal-organic framework Cu3(HHTP)2 composite electrode for flexible energy storage applications10.1016/j.jpowsour.2025.236214 ↗
17. A wearable supercapacitor based on conductive PEDOT:PSS-coated cloth and a sweat electrolyte10.1002/adma.201907254 ↗
18. Recent advances in flexible wearable supercapacitors: properties, fabrication, and applications10.1002/advs.202302172 ↗
19. Graphene–graphite polyurethane composite based high-energy density flexible supercapacitors10.1002/advs.201802251 ↗
20. Carbon-yarn-based supercapacitors with in situ regenerated cellulose hydrogel for sustainable wearable electronics10.1021/acsaem.2c01222 ↗
21. Advancements and challenges in antenna design and rectifying circuits for radio frequency energy harvesting10.3390/s24216804 ↗
22. Joint waveform and beamforming optimization for MIMO wireless power transfer10.1109/TCOMM.2021.3075236 ↗
23. Empowering remote patient monitoring with a dual-band implantable rectenna system for wireless power and data transfer10.1109/TAP.2023.3319133 ↗
24. Autonomous RFID sensor node using a single ISM band for both wireless power transfer and data communication10.3390/s19153330 ↗
25. Wireless rechargeable sensor networks: energy provisioning technologies, charging scheduling schemes, and challenges
26. Beamforming optimization for MIMO wireless power transfer with nonlinear energy harvesting: RF combining versus DC combining
27. RF-powered wearable energy harvesting and storage module based on e-textile coplanar waveguide rectenna and supercapacitor10.1109/OJAP.2021.3059501 ↗
28. Dopamine functionalized activated carbon-based 3D-printed biodegradable electrode for supercapacitor10.1109/JFLEX.2025.3534186 ↗
29. Simultaneous wireless power transfer and full-duplex communication with a single coupling interface10.1109/TPEL.2020.3035782 ↗
30. Investigation of charge contribution in Cu2O/graphene/PEDOT:PSS electrode based 3D-shaped electrochemical capacitors and development of structural energy storage10.1016/j.jpowsour.2025.238300 ↗
31. Sustainable non-PFAS hydrophobic surfaces from naturally derived sepiolite, myristic acid, and ethyl cellulose for stable dropwise condensation10.1002/smll.202505314 ↗
32. Mid- and near-infrared reflection spectral database of natural organic materials in the cultural heritage field10.1155/2018/7823248 ↗
33. Preparation of octahedral Cu2O nanoparticles by a green route10.1016/j.matlet.2015.08.055 ↗
34. Guanidine, amitrole and imidazole as nitrogen dopants for the synthesis of N-graphenes10.1039/C5RA24624E ↗
35. Quantification of pore accessibility in mesoporous supercapacitor electrode using cyclic voltammetry
36. Flexible supercapacitors with improved energy density using OPBI-coated polyaniline–carbon nanotube blends10.1109/TED.2024.3415575 ↗
37. A review of carbon materials for supercapacitors10.1016/j.matdes.2022.111017 ↗
38. Synergistic effect of solvent addition and temperature treatment on conductivity enhancement of MWCNTs: PEDOT:PSS composite ink for electrodes in all-printed solid-state micro-supercapacitors10.1016/j.cej.2024.153495 ↗
39. Reversible redox cycling of well-defined ultrasmall Cu/Cu2O nanoparticles10.1021/acsnano.6b07694 ↗
40. Optimizing (1−x) BiFeO3−xCaTiO3 perovskites: a pathway to efficient flexible energy storage10.1002/adfm.202507692 ↗
41. RF-sputtered Al-doped ZnO-based transparent electrochemical capacitors developed as structural energy storage to replace double-glazed windows for smart buildings10.1063/5.0255229 ↗
42. Flexible electrochemical capacitors based on ZnO–carbon black composite10.1016/j.rineng.2025.104510 ↗
43. Theoretical analysis of RF–DC conversion efficiency for class-F rectifiers10.1109/TMTT.2014.2298368 ↗