journal article·2026-06Open access

Hybrid 0D-2D conductive networks enable low-tortuosity transport in solvent-free thick NCM811 cathodes

Hyeonji Jung, Hee Jeung Oh, Mincheol Chang, Youngjae Yoo

Abstract

The rapid expansion of electric vehicles (EVs) and large-scale energy storage systems (ESS) demands scalable manufacturing strategies for high-energy-density lithium-ion batteries. Solvent-free dry electrode processing enables thick electrodes but inevitably increases transport resistance and Li + pathway tortuosity, leading to polarization and performance degradation. Herein, we investigate the role of conductive additive dimensionality in governing ion transport behavior in ∼150 μm-thick Ni-rich NCM811 cathodes fabricated via a dry process. By systematically controlling the ratio of zero-dimensional (0D) Super P and two-dimensional (2D) graphene nanoplatelets (GNPs), we isolate geometric effects on Li + transport under comparable porosity and structural conditions. Effective ionic tortuosity was quantified using symmetric cell impedance analysis. The S75G25 electrode exhibited the lowest tortuosity (τ = 6.09), indicating improved pathway continuity. Although all electrodes showed similar redox behavior and low-rate capacity, pronounced differences emerged under transport-limited conditions. The S75G25 composition delivered 194 mAh g −1 at 0.2 C and 125 mAh g −1 at 0.5 C, while higher-tortuosity electrodes exhibited accelerated capacity fading and structural degradation, including particle cracking and secondary particle collapse. These results establish effective tortuosity as a key structural descriptor linking pore architecture, transport uniformity, and degradation in dry-processed thick Ni-rich cathodes, providing guidance for scalable high-loading electrode design.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Supercapacitor Materials and Fabrication

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Lithium-ion batteries and the future of sustainable energy: a comprehensive review10.1016/j.rser.2025.115971 ↗
2. High-nickel layered oxide cathodes for lithium-based automotive batteries10.1038/s41560-019-0513-0 ↗
3. Enabling an intrinsically safe and high-energy-density 4.5 V-Class lithium-ion battery with synergistically incorporated fast ion conductors
4. Manufacturing techniques for improved rate capacity of thick electrodes by tailored electrode structures10.1016/j.est.2024.115253 ↗
5. Understanding and calibration of charge storage mechanism in cyclic voltammetry curves10.1002/anie.202104167 ↗
6. Design and preparation of thick electrodes for lithium-ion batteries10.1016/j.est.2024.114357 ↗
7. Boosted storage kinetics in thick hierarchical micro–nano carbon architectures for high areal capacity Li-Ion batteries10.1002/eem2.12241 ↗
8. Promoting transport kinetics in Li-Ion battery with aligned porous electrode architectures10.1021/acs.nanolett.9b03824 ↗
9. Rheology and structure of lithium-ion battery electrode slurries10.1002/ente.202200545 ↗
10. Thick electrode batteries: principles, opportunities, and challenges10.1002/aenm.201901457 ↗
11. Dry-electrode manufacturing for high-energy lithium-ion batteries: principles, advances, and challenges
12. Water-based electrode manufacturing and direct recycling of lithium-ion battery electrodes—A green and sustainable manufacturing system
13. Ultrahigh loading dry-process for solvent-free lithium-ion battery electrode fabrication10.1038/s41467-023-37009-7 ↗
14. Ozone-treated carbon nanotube as a conductive agent for dry-processed lithium-ion battery cathode10.1021/acsenergylett.3c00936 ↗
15. Design of densified nickel-rich layered composite cathode via the dry-film process for sulfide-based solid-state batteries10.1039/D2TA05021H ↗
16. High-throughput and high-performance lithium-ion batteries via dry processing10.1016/j.cej.2023.144300 ↗
17. Dry electrode processing for lithium-ion battery cathodes and anodes: materials, fabrication strategies, and future outlook
18. High-loading lithium-sulfur batteries with solvent-free dry-electrode processing10.1002/smll.202400728 ↗
19. Advancements in dry electrode technologies: towards sustainable and efficient battery manufacturing
20. Development of a feasible and scalable manufacturing method for PTFE-based solvent-free lithium-ion battery electrodes10.1016/j.cej.2024.151957 ↗
21. Progress in solvent-free dry-film technology for batteries and supercapacitors10.1016/j.mattod.2022.04.008 ↗
22. 10 mAh cm−2 cathode by roll-to-roll process for low cost and high energy density Li-Ion batteries
23. Low-resistance LiFePO4 thick film electrode processed with dry electrode technology for high-energy-density lithium-ion batteries10.1002/smsc.202300302 ↗
24. Dry electrode technology, the rising star in solid-state battery industrialization10.1016/j.matt.2022.01.011 ↗
25. A 5 V-class cobalt-free battery cathode with high loading enabled by dry coating10.1039/D2EE03840D ↗
26. Effect of active material morphology on PTFE-fibrillation, powder characteristics and electrode properties in dry electrode coating processes10.1016/j.powtec.2024.120451 ↗
27. Solvent-free lithium iron phosphate cathode fabrication with fibrillation of polytetrafluoroethylene10.1016/j.electacta.2023.142469 ↗
28. Dual-fibrous PTFE structure enabling uniform and thick dry electrodes for high-energy-density and long-lasting batteries10.1039/D5EE03240G ↗
29. High-loading dry-electrode for all solid-state batteries: nanoarchitectonic strategies and emerging applications10.1007/s41918-025-00240-5 ↗
30. Conductive agent-controlled tortuosity in solvent-free thick-film electrodes for high-energy lithium-ion batteries10.1002/eem2.70019 ↗
31. Dry-processed thick electrode design with a porous conductive agent enabling 20 mA h cm−2 for high-energy-density lithium-ion batteries10.1039/D4EE04106B ↗
32. Enhancing the rate and cycle performance of graphite anode for Li-ion batteries by constructing a multidimensional conducting network10.1016/j.diamond.2023.109911 ↗
33. Ni-rich lithium nickel manganese cobalt oxide cathode materials: a review on the synthesis methods and their electrochemical performances10.1016/j.heliyon.2023.e23968 ↗
34. Effects of graphene nanosheets with different lateral sizes as conductive additives on the electrochemical performance of LiNi0.5Co0.2Mn0.3O2 cathode materials for Li ion batteries10.3390/polym12051162 ↗
35. Superior stability secured by a four-phase cathode electrolyte interface on a Ni-Rich cathode for lithium ion batteries10.1021/acsami.9b12578 ↗
36. Mixed-conducting interlayer boosting the electrochemical performance of Ni-rich layered oxide cathode materials for lithium ion batteries10.1016/j.jpowsour.2019.03.014 ↗
37. Ni-rich LiNi0·8Co0·1Mn0·1O2 coated with Li-ion conductive Li3PO4 as competitive cathodes for high-energy-density lithium ion batteries10.1016/j.electacta.2020.135871 ↗
38. Improved electrochemical performance of cathode material LiNi0.8Co0.1Mn0.1O2 by doping magnesium via co-precipitation method10.1007/s10854-019-01062-0 ↗
39. Impact of the carbon matrix composition on the S/C cathode porosity and performance in prototype Li–S cells10.1002/ente.202300518 ↗
40. Numerical design of microporous carbon binder domains phase in composite cathodes for lithium-ion batteries10.1021/acsami.3c00998 ↗
41. Recent advancements in zero- to three-dimensional carbon networks with a two-dimensional electrode material for high-performance supercapacitors10.1039/D3NA00094J ↗
42. Navigating the carbon maze: a roadmap to effective carbon conductive networks for lithium-ion batteries10.1002/aenm.202400499 ↗
43. Tortuosity anisotropy in lithium-ion battery electrodes10.1002/aenm.201301278 ↗
44. Tortuosity determination of battery electrodes and separators by impedance spectroscopy10.1149/2.1141607jes ↗
45. Tortuosity in electrochemical devices: a review of calculation approaches10.1080/09506608.2016.1249995 ↗
46. Determination of tortuosity using impedance spectra analysis of symmetric cell10.1149/2.0331711jes ↗
47. Stabilization of NCM811 cathode for Li-ion batteries by N-doped carbon coating10.1016/j.diamond.2023.110233 ↗
48. The effect of controlling strategies of pH and ammonia concentration on preparing full concentration gradient Ni0.8Co0.1Mn0.1(OH)2 via coprecipitation in a pilot-scale reactor10.1002/ente.201901437 ↗
49. S. Wan, S. Chen, A dithiol-based new electrolyte additive for improving electrochemical performance of NCM811 lithium ion batteries, (n.d.). https://doi.org/10.1007/s11581-020-03768-2/Published..
50. Feasible synthesis of NCM811 cathodes with controllable Li/Ni cationic mixing for enhanced electrochemical performance via a nano grinding assisted solid-state approach10.1002/er.6296 ↗
51. Coating effect of various-phase alumina nanoparticles on NCM811 cathode for enhancing electrochemical performance of lithium-ion batteries10.1021/acsaem.4c00272 ↗
52. Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries
53. In situ construction of gradient oxygen release buffer and interface cation self-accelerator stabilizing high-voltage Ni-Rich cathode10.1002/adfm.202206428 ↗
54. Improving the electrochemical performance of core–shell LiNi0.8Co0.1Mn0.1O2 cathode materials using environmentally friendly phase structure control process
55. An electrolyte additive for improving the performance of NCM811 battery: Ethyl 3-methyl-3-phenyl-glycidate10.1007/s10008-023-05625-4 ↗
56. A fluorinated electrolyte stabilizing high-voltage graphite/NCM811 batteries with an inorganic-rich electrode-electrolyte interface10.1016/j.cej.2022.135939 ↗
57. Electrolyte reactivity at the charged Ni-Rich cathode interface and degradation in Li-Ion batteries10.1021/acsami.1c22812 ↗
58. Enhanced cyclic stability of LiNi0.8Co0.1Mn0.1O2 (NCM811) by AlF3 coating via atomic layer deposition10.1007/s11581-022-04691-4 ↗