Comparative numerical analysis of solid oxide fuel cell stacks using internal and external manifolds
Source abstract
Abstract
A comprehensive numerical study evaluates the performance of a solid oxide fuel cell (SOFC) stack with various manifold configurations using a multi-scale model. The model solves coupled transport equations across different stack domains and is validated using experimental data from a 1 kW SOFC stack. The analysis examines reactant concentration, current density, and temperature distributions across three configurations: internal, external, and a newly proposed modified external manifold designed to improve inlet flow uniformity across individual cells within the stack. Results indicate the modified design significantly improves reactant distribution, reducing hydrogen and oxygen flow maldistribution by nearly 19% and 28%, respectively, compared to the internal design. Consequently, in the critical topmost cell, the active area operating above the nominal 70% fuel utilization decreases from 65% in the internal manifold case to less than 1% in the modified design. This contributes to a 52% reduction in current density variation, a 12% decrease in the solid temperature gradient, and a 14% reduction in cooling airflow requirements. These enhancements lead to more uniform electrochemical behavior and thermal operating conditions. In particular, the modified design improves efficiency by enabling higher voltage output at elevated load currents, while simultaneously enhancing durability through a more uniform current density distribution.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · High-Temperature Coating Behaviors · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Optimization of a new flow design for solid oxide cells using computational fluid dynamics modelling10.1016/j.jpowsour.2016.10.060 ↗
2. Modeling and simulation of planar SOFC to study the electrochemical properties10.1016/j.cap.2020.02.018 ↗
3. Numerical modeling and simulation of the solid oxide cell stacks and metal interconnect oxidation with OpenFOAM10.3390/en16093827 ↗
4. Micro modelling of solid oxide electrolysis cell: from performance to durability10.1016/j.ijhydene.2013.03.162 ↗
5. Computational fluid dynamics modeling of a solid oxide electrolyzer cell for hydrogen production10.1016/j.ijhydene.2009.07.080 ↗
6. Computational fluid dynamics analysis of solid oxide electrolysis cells with delaminations10.1016/j.ijhydene.2010.04.158 ↗
7. Modelling of solid oxide steam electrolyser: impact of the operating conditions on hydrogen production10.1016/j.jpowsour.2010.09.054 ↗
8. A new stack to validate technical solutions and numerical simulations10.1002/fuce.201100078 ↗
9. A three dimensional multiphysics model of a solid oxide electrochemical cell: a tool for understanding degradation10.1016/j.ijhydene.2018.04.164 ↗
10. Localized carbon deposition in solid oxide electrolysis cells studied by multiphysics modeling10.1016/j.jpowsour.2018.05.039 ↗
11. A multiphysics fully coupled modeling tool for the design and operation analysis of planar solid oxide fuel cell stacks10.1016/j.apenergy.2017.01.034 ↗
12. Three-dimensional computational fluid dynamics modelling and experimental validation of the Jülich Mark-F solid oxide fuel cell stack10.1016/j.jpowsour.2017.10.030 ↗
13. Comprehensive computational fluid dynamics model of solid oxide fuel cell stacks10.1016/j.ijhydene.2016.05.103 ↗
14. A fully-homogenized multiphysics model for a reversible solid oxide cell stack10.1016/j.ijhydene.2019.06.077 ↗
15. A coupled 3D thermofluid–thermomechanical analysis of a planar type production scale SOFC stack10.1016/j.ijhydene.2011.06.045 ↗
16. 3D transient multiphysics modelling of a complete high temperature fuel cell system using coupled CFD and FEM10.1016/j.ijhydene.2014.01.063 ↗
17. A study of temperature distribution across a solid oxide fuel cell stack10.1115/1.3080810 ↗
18. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 Co-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
19. Performance analysis of a reversible solid oxide cell system based on multi-scale hierarchical solid oxide cell modelling10.1016/j.enconman.2019.05.099 ↗
20. Benchmarking solid oxide electrolysis cell-stacks for industrial power-to-methane systems via hierarchical multi-scale modelling10.1016/j.apenergy.2022.119143 ↗
21. Evaluating high power density, direct-ammonia SOFC stacks for decarbonizing heavy-duty transportation applications10.1016/j.apenergy.2024.123646 ↗
22. Multi-scale modeling of degradation of full solid oxide fuel cell stacks10.1016/j.ijhydene.2021.05.204 ↗
23. Modelling of local mechanical failures in solid oxide cell stacks10.1016/j.apenergy.2021.116901 ↗
24. 3D modeling of a 200 cm2 HT-PEFC short stack10.1016/j.ijhydene.2011.10.055 ↗
25. Design and analysis of SOFC stack with different types of external manifolds10.1016/j.ijhydene.2020.07.145 ↗
26. Feasibility study of an external manifold for planar intermediate-temperature solid oxide fuel cells stack10.1016/j.ijhydene.2012.06.020 ↗
27. Solid oxide fuel cells for stationary, mobile, and military applications10.1016/S0167-2738(02)00349-1 ↗
28. Balliet · 2012 · vol. 8 · 119
29. A key geometric parameter for the flow uniformity in planar solid oxide fuel cell stacks10.1016/j.ijhydene.2009.02.071 ↗
30. Geometric optimization of a 10-cell modular planar solid oxide fuel cell stack manifold10.1016/j.apenergy.2013.04.035 ↗
31. Optimization of manifold design for 1 kW-class flat-tubular solid oxide fuel cell stack operating on reformed natural gas10.1016/j.jpowsour.2016.07.077 ↗
32. Numerical simulation of flow distribution for external manifold design in solid oxide fuel cell stack10.1016/j.ijhydene.2016.12.009 ↗
33. Numerical modeling of manifold design and flow uniformity analysis of an external manifold solid oxide fuel cell stack10.1016/j.ijhydene.2020.02.143 ↗
34. Numerical analysis of gas distribution in 1000 W-Class solid oxide fuel cell stack with internal and external manifolding10.1115/1.4048709 ↗
35. Fast and stable approximation of laminar and turbulent flows in channels by Darcy's law10.1016/j.aej.2020.12.033 ↗
36. Modelling of cells, stacks and systems based around metal-supported planar IT-SOFC cells with CGO electrolytes operating at 500–600° C10.1016/j.jpowsour.2004.12.067 ↗
37. Wahlstrom · 2020
38. Comsol · 2023 · 6.2
39. Distinct modeling parameter identification for precision modeling of solid oxide cells under fuel cell and electrolysis modes10.1016/j.jpowsour.2025.237716 ↗
40. Modeling of single- and double-sided high-pressure operation of solid oxide electrolysis stacks10.1016/j.ijhydene.2023.04.169 ↗
41. SOFC modeling and parameter identification by means of impedance spectroscopy10.1149/1.3247567 ↗
42. Parametric study of solid oxide steam electrolyzer for hydrogen production10.1016/j.ijhydene.2007.03.001 ↗
43. Three-dimensional modeling of planar solid oxide fuel cells and the rib design optimization10.1016/j.jpowsour.2009.06.056 ↗
44. Influence of pressure on solid oxide electrolysis cells investigated by experimental and modeling approach10.1016/j.ijhydene.2015.07.099 ↗
45. Experimental validation of model predictive control for solid oxide fuel cells10.1016/j.jpowsour.2023.233271 ↗
46. Performance characterization of metal-supported solid-oxide fuel cell stacks at elevated pressure10.1016/j.jpowsour.2023.233083 ↗