journal article·2026-06Open access

Synergistic enhancement of PEM fuel cell performance for heavy-duty applications: PtCo/N-doped carbon catalyst and short-side-chain ionomer integration

Maria Chiara Massaro, Giovanni Marco Carrabba, Enrico Sartoretti, Anna Ostroverkh, Fiora Artusio, Roberto Pisano, Ulrike I. Kramm, Alessandro Hugo Antonio Monteverde

Abstract

This study systematically investigates a synergistic catalyst–ionomer design strategy integrating catalyst architecture, support chemistry, and ionomer structure to enable proton exchange membrane fuel cell (PEMFC) performance relevant to heavy-duty applications. A non-commercial PtCo alloy catalyst supported on nitrogen-doped mesoporous carbon (PtCo/MFCS) enhances intrinsic oxygen reduction reaction activity via alloying while promoting ionomer dispersion, proton accessibility, and favorable interfacial interactions through surface nitrogen functionalities. In parallel, a short-side-chain perfluorosulfonic acid (SSC PFSA) ionomer (Aquivion® D79) is introduced to improve proton conductivity and water retention under low-humidity conditions. In a systematic MEA campaign, PtCo/MFCS delivers over 16 × higher mass activity at 0.9 V (537 vs 32 mA mg Pt −1 ) than a commercial Pt/Vulcan catalyst, despite 43% lower Pt loading, supported by higher electrochemically active surface area and improved dispersion. Beyond kinetic gains, the mesoporous nitrogen-doped support enhances mid-to-high current density performance by facilitating oxygen transport and water management. Replacing Nafion® with Aquivion® D79 further sustains performance under partial humidification down to 33% RH, demonstrating that SSC ionomer benefits emerge only when coupled with appropriate support porosity and chemistry. Overall, the results reveal strong catalyst–support–ionomer synergy, enabling robust, balance-of-plant-friendly PEMFC operation and offering a credible pathway toward U.S. Department of Energytargets for heavy-duty fuel cell. • PtCo/N-doped carbon shows >16 × higher mass activity than commercial Pt/Vulcan. • Mesoporous N-doped support enhances ECSA, Pt utilization, and oxygen transport. • PtCo catalyst outperforms Pt/Vulcan at 2 bar(abs), revealing pressure dependence. • Short-side-chain PFSA ionomer improves PEMFC performance at low humidity (33–50% RH). • EIS confirms reduced ohmic and charge-transfer resistances versus baseline MEA.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Transition metal dissolution control in Pt-alloy catalyst layers for low Pt-loaded PEMFCs for improving mass transfer10.1016/j.ijheatmasstransfer.2021.121615 ↗
2. Templated N-Doped carbon nanospheres with tailored porosity for high performance PEM fuel cell catalysts under a wide range of conditions10.1002/aenm.202500954 ↗
3. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
4. Engineering catalyst layers for next-generation polymer electrolyte fuel cells: a review of design, materials, and methods10.1002/aenm.202101025 ↗
5. Research progress of catalyst layer and interlayer interface structures in membrane electrode assembly (MEA) for proton exchange membrane fuel cell (PEMFC) system10.1016/j.etran.2020.100075 ↗
6. Hydrogen fuel cell road vehicles: state of the art and perspectives10.3390/en13215843 ↗
7. Carbon-Supported Pt-Based alloy electrocatalysts for the oxygen reduction reaction in polymer electrolyte membrane fuel cells: particle size, shape, and composition manipulation and their impact to activity10.1021/cr500519c ↗
8. The origin of enhanced electrocatalytic activity of Pt-M (M = Fe, Co, Ni, Cu, and W) alloys in PEM fuel cell cathodes: a DFT computational study10.1016/j.comptc.2014.09.017 ↗
9. High-performance fuel cell cathodes exclusively containing atomically dispersed iron active sites10.1039/C9EE00877B ↗
10. Impact of surface functionalization on the intrinsic properties of the resulting fe–n–c catalysts for fuel cell applications10.1002/ente.202070091 ↗
11. Stability of atomically dispersed fe–n–c ORR catalyst in polymer electrolyte fuel cell environment10.1149/1945-7111/abe34c ↗
12. Influence of the addition of nanoparticles on the oxygen reduction reaction characteristics of FeNC catalysts and the impact on the stability10.1016/j.jpowsour.2023.232713 ↗
13. Non-noble metal (NNM) catalysts for fuel cells: tuning the activity by a rational step-by-step single variable evolution
14. Hydrogen and Fuel Cell Technologies Office, DOE Technical Targets for Fuel Cell Systems and Stacks for Transportation Applications, (n.d.). https://www.energy.gov/eere/fuelcells/doe-technical-targets-fuel-cell-systems-and-stacks-transportation-applications (accessed November 23, 2023)..
15. Nano-engineering of a 3D-ordered membrane electrode assembly with ultrathin Pt skin on open-walled PdCo nanotube arrays for fuel cells10.1039/C7TA10901F ↗
16. A novel cathode structure with double catalyst layers and low Pt loading for proton exchange membrane fuel cells10.1016/j.ijhydene.2013.02.118 ↗
17. Surface properties of Pt and PtCo electrocatalysts and their influence on the performance and degradation of high-temperature polymer electrolyte fuel cells10.1021/jp104528q ↗
18. Fuel cell catalyst layers containing short-side-chain perfluorosulfonic acid ionomers10.1016/j.jpowsour.2010.06.050 ↗
19. Constrained hydrocarbon-based ionomers in porous Poly(tetrafluoroethylene) supports for enhanced durability of polymer electrolyte membrane fuel cells and water electrolyzers10.1016/j.jpowsour.2022.232221 ↗
20. Remarkable reinforcement effect in sulfonated aromatic polymers as fuel cell membrane10.1021/acsaem.7b00349 ↗
21. Fuel cell catalyst layers: a polymer science perspective10.1021/cm401445h ↗
22. Designing the next generation of proton-exchange membrane fuel cells10.1038/s41586-021-03482-7 ↗
23. Recent developments in catalyst-related PEM fuel cell durability10.1016/j.coelec.2020.02.007 ↗
24. Mitigation of PEM fuel cell catalyst degradation with porous carbon supports10.1149/2.0371904jes ↗
25. Nitrogen-doped carbon supports for Pt-based fuel cell electrocatalysts10.1016/j.cej.2025.162816 ↗
26. Understanding the performance increase of catalysts supported on N-Functionalized carbon in PEMFC catalyst layers10.1149/1945-7111/ac6e4d ↗
27. Electronic interaction between platinum nanoparticles and nitrogen-doped reduced graphene oxide: effect on the oxygen reduction reaction10.1039/C5TA01285F ↗
28. Nitrogen: unraveling the secret to stable carbon-supported Pt-alloy electrocatalysts10.1039/c3ee40189h ↗
29. The key to high performance low Pt loaded electrodes10.1149/2.1621704jes ↗
30. Current understanding of catalyst/ionomer interfacial structure and phenomena affecting the oxygen reduction reaction in cathode catalyst layers of proton exchange membrane fuel cells10.1016/j.coelec.2020.03.006 ↗
31. Ionomer distribution control in porous carbon-supported catalyst layers for high-power and low Pt-loaded proton exchange membrane fuel cells10.1038/s41563-019-0487-0 ↗
32. Materials, technological status, and fundamentals of PEM fuel cells – a review10.1016/j.mattod.2019.06.005 ↗
33. Transport and electrochemical interface properties of ionomers in low-pt loading catalyst layers: effect of ionomer equivalent weight and relative humidity10.3390/molecules25153387 ↗
34. Performance comparison of Proton exchange membrane fuel cells with nafion and aquivion perfluorosulfonic acids with different equivalent weights as the electrode binders10.1021/acsomega.0c02110 ↗
35. Effects of short-side-chain perfluorosulfonic acid ionomers as binders on the performance of low Pt loading fuel cell cathodes10.1016/j.jpowsour.2014.10.149 ↗
36. Carbon corrosion resistance in PEM fuel cells: comparative study of short and long side chain perfluorosulfonic acid ionomers10.1016/j.ijhydene.2025.04.262 ↗
37. Ocampo · 2021
38. Proton conduction and oxygen reduction kinetics in PEM fuel cell cathodes: effects of ionomer-to-carbon ratio and relative humidity
39. Editors' Choice—Ionomer side chain length and equivalent weight impact on high Current density transport resistances in PEMFC cathodes10.1149/1945-7111/abe5eb ↗
40. On the micro-, meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
41. Investigating the effects of proton exchange membrane fuel cell conditions on carbon supported platinum electrocatalyst composition and performance10.1116/1.4707153 ↗
42. Coupling atomically ordered PtCo catalysts with ultrathin nitrogen-doped carbon shell for enhanced oxygen reduction10.1016/j.jcat.2023.115124 ↗
43. Unveiling the impact of pore structure of cathode catalyst layer on proton exchange membrane cell performance10.1016/j.ijhydene.2024.02.303 ↗
44. Impact of carbon N-Doping and Pyridinic-N content on the fuel cell performance and durability of carbon-supported Pt nanoparticle catalysts10.1021/acsami.2c00762 ↗
45. Alternative and facile production pathway towards obtaining high surface area PtCo/C intermetallic catalysts for improved PEM fuel cell performance10.1039/D2RA07780A ↗
46. A systematic approach for matching simulated and experimental polarization curves for a PEM fuel cell10.1016/j.ijhydene.2019.11.057 ↗
47. Ionomer network of catalyst layers for proton exchange membrane fuel cell10.1016/j.jpowsour.2021.230186 ↗
48. Insight into carbon corrosion of different carbon supports for Pt-based electrocatalysts using accelerated stress tests in polymer electrolyte fuel cells10.1016/j.jpowsour.2022.232209 ↗
49. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
50. An EIS approach to quantify the effects of inlet air relative humidity on the performance of proton exchange membrane fuel cells: a pathway to developing a novel fault diagnostic method10.1016/j.ijhydene.2024.01.218 ↗