Statistical analysis for robust battery state estimation: Demonstrating ANOVA-driven feature selection with electrochemical impedance spectroscopy
Source abstract
Abstract
Accurate state estimation is essential for the safe and efficient operation of lithium-ion batteries, with temperature being a key variable affecting performance and degradation. electrochemical impedance spectroscopy-based temperature estimation has been widely explored due to its advantages over surface-mounted sensors. However, systematic feature selection methods capable of quantifying the effect of all variance sources on impedance, including their interactions, have not yet been reported. Here, we propose a feature selection approach based on analysis of variance (ANOVA). The method calculates the effect size (ES) of all variance sources and their interactions for each impedance feature. Since ES quantifies relative contributions, it enables objective comparison and ranking of features. Although demonstrated here for temperature estimation, the method can be applied to any state variable. Validation with synthetic data from a Doyle-Fuller-Newman-based model confirmed the ability to identify features primarily driven by temperature. The method was then applied to experimental data across varying temperatures and state of charge (SoC). Finally, three features of different ranks were tested under dynamic conditions, where the highest-ranked feature yielded the lowest root-mean-square error of 1.25 °C without SoC information. This systematic approach advances impedance-based diagnostics by improving state estimation accuracy and providing a standardized feature selection framework. • ANOVA-based feature selection for impedance-based state estimation is presented. • The approach is validated using a physicochemical impedance model. • ANOVA-based feature selection is applied to commercial cell data. • Accurate temperature estimation is achieved without SoC information. • The method provides a systematic framework transferable to other state variables.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Technologies Research · Advancements in Battery Materials · Fault Detection and Control Systems
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Application of electrochemical impedance spectroscopy to commercial Li-ion cells: A review10.1016/j.jpowsour.2020.228742 ↗
2. State of health (SOH) assessment for LIBs based on characteristic electrochemical impedance10.1016/j.jpowsour.2024.234386 ↗
3. SOH estimation method for lithium-ion batteries based on an improved equivalent circuit model via electrochemical impedance spectroscopy10.1016/j.est.2024.111167 ↗
4. Single frequency feature point derived from DRT for SOH estimation of lithium ion battery10.1149/1945-7111/adbc24 ↗
5. SOC estimation of lithium-ion batteries using equivalent circuit model and nyquist plots from EIS data: A machine learning approach10.1016/j.jelechem.2025.119093 ↗
6. A comparative study of battery state-of-charge estimation using electrochemical impedance spectroscopy by different machine learning methods10.1016/j.energy.2025.136658 ↗
7. Instantaneous measurement of the internal temperature in lithium-ion rechargeable cells10.1016/j.electacta.2011.03.136 ↗
8. A new lithium-ion battery internal temperature on-line estimate method based on electrochemical impedance spectroscopy measurement10.1016/j.jpowsour.2014.10.182 ↗
9. Lithium-ion battery temperature on-line estimation based on fast impedance calculation10.1016/j.est.2019.100952 ↗
10. Instantaneous estimation of internal temperature in lithium–ion battery by impedance measurement10.1002/er.5144 ↗
11. Measurement of the internal cell temperature via impedance: Evaluation and application of a new method10.1016/j.jpowsour.2013.06.013 ↗
12. Battery internal temperature estimation by combined impedance and surface temperature measurement10.1016/j.jpowsour.2014.04.129 ↗
13. Expanding the operational limits of the single-point impedance diagnostic for internal temperature monitoring of lithium-ion batteries10.1016/j.electacta.2015.06.003 ↗
14. Prediction of lithium-ion battery internal temperature using the imaginary part of electrochemical impedance spectroscopy10.1016/j.ijheatmasstransfer.2025.126664 ↗
15. Internal temperature estimation method for lithium-ion battery based on multi-frequency imaginary part impedance and GPR model10.1016/j.est.2025.116287 ↗
16. A comparison and accuracy analysis of impedance-based temperature estimation methods for Li-ion batteries10.1016/j.apenergy.2016.04.103 ↗
17. Sensorless battery temperature measurements based on electrochemical impedance spectroscopy10.1016/j.jpowsour.2013.09.005 ↗
18. Robust estimation of battery system temperature distribution under sparse sensing and uncertainty10.1109/TCST.2019.2892019 ↗
19. Digital twin of a MWh-scale grid battery system for efficiency and degradation analysis10.1016/j.apenergy.2023.120774 ↗
20. Dynamic electrochemical impedance spectroscopy: A forward application approach for lithium–Ion battery status assessment10.1002/eom2.70018 ↗
21. Monitoring dynamic thermal behavior of the carbon anode in a lithium-ion cell using a four-probe technique10.1016/j.jpowsour.2011.09.077 ↗
22. Empirical analysis of contributing factors to heating in lithium-ion cells: Anode entropy versus internal resistance10.1016/j.jpowsour.2013.04.108 ↗
23. The five modes of heat generation in a Li-ion cell under discharge10.1016/j.jpowsour.2014.03.062 ↗
24. Graphitic carbon anode temperature excursions reflect crystallographic phase transitions in lithium-ion cells10.1016/j.jpowsour.2015.06.017 ↗
25. Battery internal temperature estimation for LiFePO4 battery based on impedance phase shift under operating conditions10.3390/en10010060 ↗
26. Sensorless battery internal temperature estimation using a Kalman filter with impedance measurement10.1109/TSTE.2015.2420375 ↗
27. Experimental investigation of parametric cell-to-cell variation and correlation based on 1100 commercial lithium-ion cells10.1016/j.est.2017.09.010 ↗
28. Electrochemical impedance spectroscopy-based characterization and modeling of lithium-ion batteries based on frequency selection10.3390/batteries11010011 ↗
29. Tabachnick · 2007
30. Montgomery · 2017
31. Demystifying omega squared: Practical guidance for effect size in common analysis of variance designs
32. Practical significance: A concept whose time has come10.1177/0013164496056005002 ↗
33. A Bayesian approach for li-ion battery capacity fade modeling and cycles to failure prognostics10.1016/j.jpowsour.2015.01.164 ↗
34. Electrochemical-thermal modelling and optimisation of lithium-ion battery design parameters using analysis of variance10.3390/en10091278 ↗
35. Design of experiments applied to lithium-ion batteries: A literature review10.1016/j.apenergy.2022.119305 ↗
36. Effect size estimates: current use, calculations, and interpretation10.1037/a0024338 ↗
37. In-operando impedance spectroscopy and ultrasonic measurements during high-temperature abuse experiments on lithium-ion batteries10.3390/batteries6020025 ↗
38. Early detection of Li-ion battery thermal runaway using commercial diagnostic technologies10.1149/1945-7111/ad2440 ↗
39. Computer simulations of the impedance response of lithium rechargeable batteries10.1149/1.1393162 ↗
40. Natterer · 2025
41. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
42. Simulation and optimization of the dual lithium ion insertion cell10.1149/1.2054684 ↗
43. Application of kramers–kronig transforms in the analysis of electrochemical systems: I . Polarization resistance10.1149/1.2113570 ↗
44. Application of Kramers–Kronig transforms in the analysis of electrochemical impedance data: II . Transformations in the complex plane10.1149/1.2108332 ↗
45. Applications of Kramers—Kronig transforms in the analysis of electrochemical impedance data—III. Stability and linearity10.1016/0013-4686(90)80010-L ↗
46. The impedance response of a porous electrode composed of intercalation particles10.1149/1.1393627 ↗
47. Physics-based battery model parametrisation from impedance data10.1149/1945-7111/add41b ↗
48. Advances in thermal management systems for next-generation power batteries10.1016/j.ijheatmasstransfer.2021.121853 ↗
49. Simulation analysis and optimization of containerized energy storage battery thermal management system10.1016/j.est.2024.112870 ↗
50. Real-world study for the optimal charging of electric vehicles10.1016/j.egyr.2019.12.008 ↗
51. Evaluation of the second-life potential of the first-generation nissan leaf battery packs in energy storage systems10.1016/j.etran.2024.100313 ↗
52. Impedance based time-domain modeling of lithium-ion batteries: Part I10.1016/j.jpowsour.2018.01.043 ↗