journal article·2026-04Open access

Quantification of [MTBD][beti] loading and its effects on Pt/HSC electrode performance in hydrogen fuel cells

Marc Manyé Ibáñez, Adam Holewinski, J. Will Medlin, Tim Van Cleve, K.C. Neyerlin

Abstract

High surface area carbon-supported platinum catalysts (Pt/HSC) are widely used in polymer electrolyte membrane fuel cells but often suffer from limited proton and oxygen transport within porous domains. To address these challenges, we integrate the ionic liquid [MTBD][beti] into Pt/HSC catalyst layers using two deposition methods—one-pot and sequential deposition—to tune IL distribution within micropores and mesopores. A combination of ex situ and in operando techniques were employed to elucidate electrode structure–performance relationships across a range of IL loadings. Sequential deposition achieved more efficient pore filling and higher IL retention at lower IL:C ratios, enabling enhanced proton conductivity and protection of active sites. Compared to the IL-free Pt/HSC, IL-modified electrodes demonstrated up to 28% improvement in mass activity and enhanced high-current-density performance under low relative humidity, while maintaining comparable performance under humidified conditions. Electrochemical impedance spectroscopy and CO displacement experiments reveal that improvements are linked to reduced ionic resistance and lower sulfonate adsorption on Pt sites, rather than changes in electrochemical surface area. However, excessive IL loading leads to mass transport losses. These results highlight the importance of selective pore filling and efficient IL distribution in achieving kinetic gains without compromising ionic and gas transport. • Sequential deposition improves IL deposition efficiency and pore filling. • Up to 28% boost in mass activity with minimal IL loading. • E x situ and in operando characterization to describe local distribution of IL within electrode. • ILs reduce sulfonate adsorption on Pt sites and enhance ionic conductivity at low RH. • Excess IL worsens gas transport causing non-monotonic performance trend with IL loading.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. The path towards sustainable energy10.1038/nmat4834 ↗
2. New roads and challenges for fuel cells in heavy-duty transportation10.1038/s41560-021-00775-z ↗
3. Batteries and fuel cells for emerging electric vehicle markets10.1038/s41560-018-0108-1 ↗
4. Just a Dream—Or future reality?10.1126/science.1172083 ↗
5. Electrocatalyst approaches and challenges for automotive fuel cells10.1038/nature11115 ↗
6. Electrode for Proton exchange membrane fuel cells: a review10.1016/j.rser.2018.03.007 ↗
7. Borup, R.; Laboratory, L. A. N.; Weber, A.; Laboratory, L. B. N. M2FCT: Million Mile Fuel Cell Truck Consortium..
8. Achievements, challenges and perspectives on cathode catalysts in Proton exchange membrane fuel cells for transportation10.1038/s41929-019-0304-9 ↗
9. Advanced electrocatalysts for the oxygen reduction reaction in energy conversion technologies10.1016/j.joule.2019.12.014 ↗
10. Dictating Pt-Based electrocatalyst performance in polymer electrolyte fuel cells, from formulation to application10.1021/acsami.9b17614 ↗
11. Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum Cobalt/high surface area carbon based polymer electrolyte fuel cells10.1016/j.jpowsour.2020.228889 ↗
12. Catalyst poisoning property of sulfonimide acid ionomer on Pt (111) surface10.1149/2.051405jes ↗
13. Suppression of oxygen reduction reaction activity on Pt-Based electrocatalysts from ionomer incorporation10.1016/j.jpowsour.2016.06.062 ↗
14. Effects of porous carbon morphology, agglomerate structure and relative humidity on local oxygen transport resistance10.1149/2.0082001JES ↗
15. Boosting fuel cell performance with accessible carbon mesopores10.1021/acsenergylett.8b00186 ↗
16. Relative humidity dependence of Pt utilization in polymer electrolyte fuel cell electrodes: effects of electrode thickness, ionomer-to-carbon ratio, ionomer equivalent weight, and carbon support10.1149/1.3556906 ↗
17. Gas transport inside and outside carbon supports of catalyst layers for PEM fuel cells10.1016/j.jelechem.2013.09.011 ↗
18. Carbon support microstructure impact on high current density transport resistances in PEMFC cathode10.1149/1945-7111/ab819c ↗
19. Confinement effects for nano-electrocatalysts for oxygen reduction reaction
20. Oxygen reduction in nanoporous metal–ionic liquid composite electrocatalysts10.1038/nmat2878 ↗
21. Modifying the electrocatalyst–ionomer interface via sulfonated Poly(Ionic liquid) block copolymers to enable high-performance polymer electrolyte fuel cells10.1021/acsenergylett.0c00532 ↗
22. Tuning the electrocatalytic performance of ionic liquid modified Pt catalysts for the oxygen reduction reaction via cationic chain engineering10.1021/acscatal.8b02018 ↗
23. Accelerating oxygen-reduction catalysts through preventing poisoning with non-reactive species by using hydrophobic ionic liquids10.1002/anie.201508338 ↗
24. Ionic liquid additives for the mitigation of nafion specific adsorption on platinum10.1021/acscatal.0c01243 ↗
25. Characterization of a sulfonated Poly(Ionic liquid) block copolymer as an ionomer for Proton exchange membrane fuel cells using rotating disk electrode10.1149/1945-7111/ac4375 ↗
26. Enhancing Pt/C catalysts for the oxygen reduction reaction with protic ionic liquids: the effect of anion structure10.1149/2.1071713jes ↗
27. Revealing the role of ionic liquids in promoting fuel cell catalysts reactivity and durability10.1038/s41467-022-33895-5 ↗
28. Ultrastable superbase-derived protic ionic liquids10.1021/jp901312d ↗
29. Lowell · 2004
30. Enhancing oxygen transport in the ionomer film on platinum catalyst using ionic liquid additives10.1016/j.fmre.2021.09.004 ↗
31. Thermal stability in air of Pt/C catalysts and PEM fuel cell catalyst layers10.1021/cm052660e ↗
32. Zhang
33. Impact of porosity and surface functionalization of hard templates on the preparation of mesoporous Silica microspheres10.1016/j.micromeso.2023.112482 ↗
34. On the Micro-, Meso-, and macroporous structures of polymer electrolyte membrane fuel cell catalyst layers10.1021/am900600y ↗
35. Impact of catalyst ink dispersing methodology on fuel cell performance using In-Situ X-Ray scattering10.1021/acsaem.9b01037 ↗
36. Elucidating the dynamic nature of fuel cell electrodes as a function of conditioning: an Ex situ material characterization and in situ electrochemical diagnostic study10.1021/acsami.9b11365 ↗