Additive manufacturing by binder jetting of thick electrode for Li-ion battery
Source abstract
Abstract
Binder jetting (BJ) has drawn attention to its ability to quickly produce complex objects using minimal amount of additives, being suitable for ceramic materials with high porosity. Thanks to these advantages, this additive manufacturing (AM) technique is now of interest in the field of energy storage. A successful NMC622 (LiNi 0.6 Mn 0.2 Co 0.2 O 2 ) thick electrode was fabricated using an aqueous formulation showing a final porosity of 35%. When cycled in half cell configuration versus lithium metal between 4.3 and 3 V at 0.2 mA/cm 2 , the printed electrode delivers a reversible capacity of 155.2 mAh/g after 10 cycles. These results, presented as a proof of concept, establish Binder Jetting as a possible route to manufacture thick and self-supported electrodes with an areal capacity of 8.33 mAh/cm 2 at 0.2 mA/cm 2 . • Highlights to the article ‘3D printing manufacturing by binder jetting of battery electrode’. • Binder Jetting allows to fabricate electrodes for Li-ions batteries. • Binder jetting has the potential for the production of thick electrodes for energy storage. • The process enabled to print with jetting an aqueous solvent. • Fabricated electrodes show excellent electrochemical performances with a surface capacity of 8,3 mAh/cm 2 without calendaring.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Advancements in Battery Materials · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. A structural battery with carbon fibre electrodes balancing multifunctional performance10.1016/j.compscitech.2024.110728 ↗
2. Three-dimensional battery architectures10.1021/cr020740l ↗
3. 3D-printed highly deformable electrodes for flexible lithium ion batteries10.1016/j.ensm.2020.07.010 ↗
4. Challenge-driven printing strategies toward high-performance solid-state lithium batteries10.1039/D1TA09322C ↗
5. 3D printed high-loading lithium-sulfur battery toward wearable energy storage
6. 3D direct writing fabrication of electrodes for electrochemical storage devices10.1016/j.jpowsour.2017.04.042 ↗
7. 3D printing of interdigitated Li-Ion microbattery architectures10.1002/adma.201301036 ↗
8. 3D printed graphene based energy storage devices10.1038/srep42233 ↗
9. Three-dimensional printing of a complete lithium ion battery with fused filament fabrication10.1021/acsaem.8b00885 ↗
10. Solvent-free extrusion of a LiFePO4-based monofilament for three-dimensional printing of a lithium-ion battery positive electrode10.1016/j.jpowsour.2023.233973 ↗
11. Manufacturing-oriented review on 3D printed lithium-ion batteries fabricated using material extrusion
12. Three-dimensional printing techniques
13. Additive manufacturing processes: selective laser melting, electron beam melting and binder jetting—selection guidelines
14. Ceramic binder jetting additive manufacturing: a literature review on density10.1115/1.4046248 ↗
15. Binder jetting process with ceramic powders: influence of powder properties and printing parameters
16. Fundamental principals of battery design: porous electrodes10.1063/1.4878477 ↗
17. Binder jetting: a novel solid oxide fuel-cell fabrication process and evaluation10.1007/s11837-015-1296-9 ↗
18. Binder-jet powder-bed additive manufacturing (3D printing) of thick graphene-based electrodes10.1016/j.carbon.2017.04.028 ↗
19. Binder jetting fabrication of highly flexible and electrically conductive Graphene/PVOH composites
20. A binder jet 3D printed MXene composite for strain sensing and energy storage application10.1039/D1NA00698C ↗
21. Preparation of NCM622 cathode material by complex combustion method and its energy storage performance10.1016/j.jallcom.2024.177475 ↗
22. Cation mixing and capacity loss in Li||Ni0.6Mn0.2Co0.2O2 cells: experimental investigation and application of the multi-site, multi-reaction model
23. From lab to manufacturing line: guidelines for the development and upscaling of aqueous processed NMC622 electrodes
24. Impact of electrode architecture on electrochemical performance of aqueous processed, high-loaded lithium-ion battery cathodes10.1002/batt.202300063 ↗
25. Study of immersion of LiNi0.5 Mn0.3 Co0.2 O2 material in water for aqueous processing of positive electrode for Li-Ion batteries10.1021/acsami.9b00999 ↗
26. New insights into orthophosphoric acid assisted rapid aqueous processing of NMC622 cathodes10.1039/D3SU00031A ↗
27. Desktop binder-jetting printer for researchers
28. The impact of structural pattern types on the electrochemical performance of ultra-thick NMC 622 electrodes for lithium-ion batteries
29. Development of an all-solid-state lithium battery by slurry-coating procedures using a sulfidic electrolyte10.1016/j.ensm.2018.11.011 ↗
30. X-ray micro-computed tomography for structural analysis of all-solid-state battery at pouch cell level10.1021/acsenergylett.5c00956 ↗
31. A conformal heat-drying direct ink writing 3D printing for high-performance lithium-ion batteries