journal article·2026-03Open access

Enhanced lithium metal battery performance with a novel poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE)-based separator incorporating a garnet-type filler

J.P. Serra, J.L. Zhong, H. Salazar, A. Fidalgo-Marijuan, R. Gonçalves, G. Barandika, Q. Zhang, Y. Liu, L.J. Zhang, Carlos M. Costa, J.Q. Wang, S. Lanceros-Mendez

Abstract

The instability of the electrolyte-electrode interphase remains a primary obstacle to realizing high-performance lithium metal batteries. To address this, we report a novel composite separator engineered via temperature-induced phase separation (TIPS), integrating Li 6.26 Al 0.24 La 3 Zr 2 O 12 (LALZO) garnet nanoparticles within a poly(vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE)] matrix. The TIPS process enables uniform dispersion of sol-gel-synthesized LALZO particles (150–400 nm) and allows precise control over the separator's morphology, pore architecture, and porosity, without compromising the polymer's chemical or thermal stability. The garnet filler fundamentally enhances ion transport, with an optimal composite containing 4 wt% LALZO achieving a high ionic conductivity of 4.3 mS cm −1 and an elevated lithium-ion transference number of 0.43. When evaluated in Li||LiNi 0.6 Co 0.2 Mn 0.2 O 2 cells, this separator enables exceptional rate capability (discharge capacities of 185.8, 176.5, 165.2, and 129.8 mAh.g −1 at C/5, C/2, 1 C, and 2 C, respectively) and cycling stability, retaining 88.3 % capacity after 80 cycles at 1 C. Post-cycling analysis reveals that the LALZO nanoparticles promote the formation of a robust, inorganic-rich solid-electrolyte interphase (SEI), which stabilizes the lithium anode interface and significantly reduces interfacial resistance. This work demonstrates that microstructure engineering via TIPS is a powerful strategy for developing multifunctional separators that simultaneously enhance bulk transport and interfacial stability in lithium metal batteries. • LALZO/PVDF-TrFE membranes were developed for battery separator applications. • LALZO garnet ceramic with an average diameter of 150–400 nm was synthesized. • LALZO content affects the physical-chemical, and functional properties of membranes. • 4 wt% LALZO membranes showed 88.3 % capacity retention at 2C after 80 cycles. • This work proves the LALZO filler stabilizes the electrode and electrolyte interface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Extraction and Separation Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Strategies to achieve a carbon neutral society: a review10.1007/s10311-022-01435-8 ↗
2. A global assessment: can renewable energy replace fossil fuels by 2050?10.3390/su14084792 ↗
3. Energy storage technologies: an integrated survey of developments, global economical/environmental effects, optimal scheduling model, and sustainable adaption policies10.1016/j.est.2023.108694 ↗
4. intelligence · 2025
5. Pathways for practical high-energy long-cycling lithium metal batteries10.1038/s41560-019-0338-x ↗
6. Toward safe lithium metal anode in rechargeable batteries: a review10.1021/acs.chemrev.7b00115 ↗
7. Recent advances on separator membranes for lithium-ion battery applications: from porous membranes to solid electrolytes10.1016/j.ensm.2019.07.024 ↗
8. Battery separators10.1021/cr020738u ↗
9. Design principles of functional polymer separators for high-energy, metal-based batteries10.1002/smll.201703001 ↗
10. Recent advances in separator design for lithium metal batteries without dendrite formation: implications for electric vehicles10.1016/j.etran.2024.100330 ↗
11. Battery separators based on vinylidene fluoride (VDF) polymers and copolymers for lithium ion battery applications10.1039/c3ra40732b ↗
12. Recent advances on battery separators based on poly(vinylidene fluoride) and its copolymers for lithium-ion battery applications
13. On the relevance of the polar β-Phase of Poly(vinylidene fluoride) for high performance lithium-ion battery separators10.1021/acs.jpcc.7b09227 ↗
14. A dual−Functional cationic covalent organic frameworks modified separator for high energy lithium metal batteries10.1002/adfm.202212466 ↗
15. A self-supporting covalent organic framework separator with desolvation effect for high energy density lithium metal batteries10.1021/acsenergylett.1c02719 ↗
16. Hydrogen-bonded organic framework as superior separator with high lithium affinity C═N bond for low N/P ratio lithium metal batteries10.1021/acs.nanolett.3c00801 ↗
17. Porous organic framework materials (MOF, COF, and HOF) as the multifunctional separator for rechargeable lithium metal batteries10.1002/smll.202401457 ↗
18. Li-ion battery separator membranes based on poly(vinylidene fluoride-trifluoroethylene)/carbon nanotube composites10.1016/j.ssi.2013.07.021 ↗
19. Microporous membranes of NaY zeolite/poly(vinylidene fluoride–trifluoroethylene) for Li-ion battery separators10.1016/j.jelechem.2012.10.030 ↗
20. Li-ion battery separator membranes based on barium titanate and poly(vinylidene fluoride-co-trifluoroethylene): filler size and concentration effects10.1016/j.electacta.2013.11.122 ↗
21. Optimization of filler type within poly(vinylidene fluoride-co-trifluoroethylene) composite separator membranes for improved lithium-ion battery performance10.1016/j.compositesb.2016.04.041 ↗
22. Enhanced comprehensive performance of the LLZO series solid electrolyte via multifunctional additive10.1016/j.jeurceramsoc.2023.11.045 ↗
23. Modified Li7La3Zr2O12 (LLZO) and LLZO-polymer composites for solid-state lithium batteries10.1016/j.ensm.2021.04.016 ↗
24. Formation mechanism of sol-gel synthesized Li7−3xAlxLa3Zr2O12 and the influence of abnormal grain growth on ionic conductivity10.1016/j.ssi.2020.115407 ↗
25. Ionic liquid composites with garnet-type Li6.75Al0.25La3Zr2O12: stability, electrical transport, and potential for energy storage applications10.1016/j.matchemphys.2024.129205 ↗
26. High-performance free-standing hybrid solid electrolyte membrane combined with Li6.28Al0.24La3Zr2O12 and hexagonal-BN for all-solid-state lithium-based batteries10.1016/j.cej.2022.137035 ↗
27. Electroactive poly(vinylidene fluoride)-based structures for advanced applications10.1038/nprot.2017.157 ↗
28. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
29. Heterogeneous double-layered hybrid solid electrolyte with a concentration-gradient structure for high-performance all-solid-state lithium batteries
30. Enhanced lithium ion transport in garnet-type solid state electrolytes10.1007/s10832-017-0080-3 ↗
31. Sintering analysis of garnet-type ceramic as oxide solid electrolytes for rapid Li+ migration10.1016/j.jeurceramsoc.2022.08.053 ↗
32. A novel magnesium-rich tricalcium aluminate for simultaneous removal of ammonium and phosphorus: response surface methodology and mechanism investigation10.1016/j.envres.2021.110719 ↗
33. Tailoring porous structure of ferroelectric poly(vinylidene fluoride-trifluoroethylene) by controlling solvent/polymer ratio and solvent evaporation rate10.1016/j.eurpolymj.2011.10.005 ↗
34. Crystallization behaviors and related dielectric properties of semicrystalline matrix in polymer-ceramic nanocomposites10.1016/j.compositesb.2021.109195 ↗
35. All-organic poly(butyl methacrylate)/Poly(vinylidenefluoride-trifluoroethylene) dielectric composites with higher permittivity and low dielectric loss for energy storage application10.1080/03602559.2016.1233257 ↗
36. Infrared spectroscopic studies on crystallization and Curie transition behavior of ultrathin films of P(VDF/TrFE) (72/28)10.1016/j.vibspec.2005.11.005 ↗
37. Thermal characterization of a vinylidene fluoride-trifluorethylene (75–25) (%mol) copolymer film10.1016/j.jnoncrysol.2006.08.025 ↗
38. Mesoporous poly(vinylidene fluoride-co-trifluoroethylene) membranes for lithium-ion battery separators10.1016/j.electacta.2019.01.178 ↗
39. Improving ionic conductivity and lithium-ion transference number in lithium-ion battery separators10.1021/acsami.6b12085 ↗
40. An ion redistributor for dendrite-free lithium metal anodes10.1126/sciadv.aat3446 ↗
41. Influence of solvent evaporation rate in the preparation of carbon-coated Lithium Iron phosphate cathode films on battery performance10.1002/ente.201500392 ↗
42. Surface reduction of Li2CO3 on LLZTO solid-state electrolyte via scalable open-air plasma treatment10.3390/batteries10070249 ↗
43. Fluorinating all interfaces enables super-stable solid-state lithium batteries by in situ conversion of detrimental surface Li2CO310.1002/adma.202308493 ↗
44. Li2O-Enhanced solid electrolyte interphase surpassing LiF-Only SEI for high-performance all-solid-state Li batteries10.1002/aenm.202502589 ↗