journal article·2026-02

Definition of standardised testing protocols for fuel cell modules in heavy-duty applications

Anirudh Balaji, Kamil Mrozewski, Cemil Bekdemir, Virginie Labe, Etienne Havret, Yali Wang

Publisher page

Abstract

This paper presents the definition of standardized testing protocols for Fuel Cell Modules (FCM) in heavy-duty applications, carried out within the framework of the European Standard-Sized Heavy-duty Hydrogen (StasHH) project. The presented testing protocols aim to enhance and streamline module performance validation and inter-laboratory comparability and were designed to benchmark application-relevant performance metrics, while accounting for diverse test environments. A set of six test protocols were developed and validated on seven StasHH fuel cell modules from six manufacturers at three different test locations. The general performance of tested FCMs is compared with key dynamic and efficiency requirements for high-power applications. Test results highlight the importance of data post-processing and reporting for consistent results. The paper also discusses the insights gained from the test campaigns, providing recommendations for further protocol improvements and outlining future efforts that can support further standardization of fuel cell modules in heavy-duty sectors.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fuel Cells and Related Materials · Nursing Education, Practice, and Leadership · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. European StasHH project, grant ID: 101005934,” [Online]. Available: https://cordis.europa.eu/project/id/101005934.
2. Bloom · J. Power Sources · 2013 · 243 · 45110.1016/j.jpowsour.2013.06.026 ↗
3. Cairns · Int. J. Hydrogen Energy · 2010 · 35 · 276710.1016/j.ijhydene.2009.05.001 ↗
4. Fuel cell technologies - Part 2-100: Fuel cell modules - Safety [IEC 62282-2-100:2020].
5. Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety [IEC 62282-3-100:2019].
6. Fuel cell technologies - Part 3-200: Stationary fuel cell power systems - Performance test methods [IEC 62282-3-200:2015].
7. Fuel cell technologies – Part 4-101: Fuel cell power systems for electrically powered industrial trucks – Safety [IEC 62282-4-101:2022].
8. Fuel cell technologies - Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods [IEC 62282-4-102:2022].
9. Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods [IEC 62282-6-200:2016].
10. Electrically propelled road vehicles — Safety specifications Part 3: Electrical safety [ISO 6469-3:2021].
11. Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components Part2: Performance and general test methods
12. 2021
13. 2021
14. 2021
15. 2021
16. 2022
17. 2021
18. 2011
19. Tsotridis
20. Tsotridis
21. 2013
22. European StackTest project, grant ID: 303445,” [Online]. Available: https://cordis.europa.eu/project/id/303445.
23. 2021
24. Mrozewski
25. Bouwman
26. 2021
27. Reciprocating internal combustion engines — Exhaust emission measurement Part 4: Steady-state and transient test cycles for different engine applications [ISO 8178-4:2020].
28. Recommended Practice for a Serial Control and Communications Vehicle Network [SAE J1939, 2011].
29. PEM fuel cell stack testing in the framework of an EU-harmonized fuel cell testing protocol: results for an 11 kW stack10.1016/j.jpowsour.2008.02.032 ↗
30. Hou · Int. J. Hydrogen Energy · 2011 · 36 · 719910.1016/j.ijhydene.2011.03.059 ↗
31. Iranzo · Electrochim. Acta · 2022 · 42610.1016/j.electacta.2022.140809 ↗
32. Kurt
33. zepp.X150, 150kW FCM from zepp.solutions, [Online]. Available: https://zepp.solutions/en/x150/.
34. Electrical installations in ships - Part 504: Automation, control and instrumentation [IEC 60092-504:2016].