journal article·2026-02Open access

Wadsley-Roth FeNb11O29 as negative electrode material for lithium solid-state batteries

Dat Le Thanh, Dominique Foix, Emmanuelle Suard, Romain Berthelot, Long Hoang Bao Nguyen

Abstract

Li-ion solid-state batteries are promising next-generation rechargeable batteries thanks to their high energy density and enhanced safety, but their performance is strongly dependent on the choice of active materials, electrode microstructure and interfacial stability. In this work, the low-strain Wadsley–Roth phase FeNb 11 O 29 is explored as a negative electrode for Li-ion solid-state batteries, benefiting from its open framework for fast Li + transport. Composite electrodes are optimised by tuning the ratio of FeNb 11 O 29 , Li 6 PS 5 Cl solid electrolyte, and vapor grown carbon fibres. The optimal composition can deliver a high-rate capability, achieving ∼210 and ∼80 mAh·g −1 at 0.19 and 1.9 mA cm −2 , respectively, even at a high areal loading of ∼10 mg cm −2 , arising from a balanced electronic and ionic transport. Kinetic limitation of Li + insertion at high rates is identified and can be partly mitigated by end-of-discharge constant-voltage steps. Post-mortem analyses confirm bulk stability of FeNb 11 O 29 and Li 6 PS 5 Cl but revealed an interfacial degradation, with a resistive Li 2 S/oxide-rich interface, consistent with impedance growth. These findings highlight the critical role of microstructural and interfacial optimisation in the electrode composites and establish FeNb 11 O 29 as a promising candidate for high-rate solid-state batteries.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Layered Double Hydroxides Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. An advance review of solid-state battery: challenges, progress and prospects
2. Inorganic solid-state electrolytes for lithium batteries: mechanisms and properties governing ion conduction10.1021/acs.chemrev.5b00563 ↗
3. Lithium battery chemistries enabled by solid-state electrolytes10.1038/natrevmats.2016.103 ↗
4. Battery safety: from lithium-ion to solid-state batteries10.1016/j.eng.2022.06.022 ↗
5. Toward better batteries: Solid-state battery roadmap 2035+10.1016/j.etran.2022.100224 ↗
6. A comprehensive review of solid-state batteries10.1016/j.apenergy.2025.125546 ↗
7. Thermal stability and flammability of electrolytes for lithium-ion batteries10.1016/j.jpowsour.2011.01.068 ↗
8. Solid-state electrolytes for lithium-ion batteries: fundamentals, challenges and perspectives10.1007/s41918-019-00048-0 ↗
9. The pursuit of solid-state electrolytes for lithium batteries: from comprehensive insight to emerging horizons10.1039/C6MH00218H ↗
10. Z. Gao, H. Sun, L. Fu, F. Ye, Y. Zhang, W. Luo, Y. Huang, Promises, Challenges, and Recent Progress of Inorganic Solid‐State Electrolytes for All‐Solid‐State Lithium Batteries , (n.d.). https://doi.org/10.1002/adma.201705702..
11. Recent advances in solid-state lithium batteries based on anode engineering10.26599/NRE.2024.9120118 ↗
12. High electronic conductivity as the origin of lithium dendrite formation within solid electrolytes10.1038/s41560-018-0312-z ↗
13. Interface between solid-state electrolytes and Li-Metal anodes: issues, materials, and processing routes10.1021/acsami.0c13591 ↗
14. Development of advanced anodes for solid-state lithium batteries10.1016/j.mattod.2025.06.041 ↗
15. Study of graphite cycling in sulfide solid electrolytes10.1149/1945-7111/aba36f ↗
16. Performance-limiting factors of graphite in sulfide-based all-solid-state lithium-ion batteries10.1016/j.electacta.2021.138735 ↗
17. Si/Graphite anodes for solid-state batteries: composition selection via electrochemical and chemo-mechanical properties10.1021/acsami.4c21587 ↗
18. Surface-modified graphite anodes for high-rate long-cycling in sulfide all-solid-state batteries10.1021/acsnano.5c05650 ↗
19. Recent advances of non-lithium metal anode materials for solid-state lithium-ion batteries10.1039/D2TA03905B ↗
20. High-capacity anode materials for all-solid-state lithium batteries10.3389/fenrg.2020.00171 ↗
21. Carbon-free high-loading silicon anodes enabled by sulfide solid electrolytes10.1126/science.abg7217 ↗
22. Chemo-mechanical failure mechanisms of the silicon anode in solid-state batteries10.1038/s41563-023-01792-x ↗
23. Rational material design on high capacity and long-term-cyclability of graphite/Si-based anodes for room temperature all-solid-state batteries10.1016/j.cej.2025.159328 ↗
24. High-rate performance of all-solid-state lithium secondary batteries using Li4Ti5O12 electrode10.1016/j.jpowsour.2008.10.005 ↗
25. Enhanced electrochemical performance of Li4Ti5O12 through in-situ coating 70Li2S-30P2S5 solid electrolyte for all-solid-state lithium batteries10.1016/j.jallcom.2018.04.149 ↗
26. Designing spinel Li4Ti5O12 electrode as anode material for poly(ethylene)oxide-based solid-state batteries10.3390/ma14051213 ↗
27. Enhancing the electrochemical properties of TiNb2O7 anodes with SP-CNT binary conductive agents for both liquid and solid state lithium ion batteries10.1039/D4RA02216E ↗
28. Nb1.60Ti0.32W0.08O5−δ as negative electrode active material for durable and fast-charging all-solid-state Li-ion batteries10.1038/s41467-024-52767-8 ↗
29. Lithium titanate anode thin films for Li-Ion solid state battery based on garnets10.1002/adfm.201800879 ↗
30. Synergistic effects of charge redistribution and morphology regulation in Mo-doped TiNb2O7 anodes for solid-state battery applications10.1007/s10853-025-10637-8 ↗
31. Porous oxygen-deficient TiNb2O7 spheres wrapped by MXene as high-rate and durable anodes for liquid and all-solid-state lithium-ion batteries10.1016/j.cej.2022.135328 ↗
32. High-efficiency hybrid sulfur cathode based on electroactive niobium tungsten oxide and conductive carbon nanotubes for all-solid-state lithium–sulfur batteries10.1021/acsami.1c21573 ↗
33. Neutron diffraction and electrochemical study of FeNb11O29/Li11FeNb11O29 for lithium battery anode applications10.1021/cm500442j ↗
34. Crystal structure modification enhanced FeNb11O29 anodes for lithium-ion batteries10.1002/celc.201700816 ↗
35. Deepening the shear structure FeNb11O29: influence of polymorphism and doping on structural, spectroscopic and magnetic properties10.1039/C8DT02896F ↗
36. FeNb11O29 nanotubes: superior electrochemical energy storage performance and operating mechanism10.1016/j.nanoen.2019.01.065 ↗
37. The doping of FeNb11O29 as a way to improve its electrochemical performances10.1002/slct.201901182 ↗
38. Orthorhombic and monoclinic modifications of FeNb11O29, as promising anode materials for lithium batteries: relationships between pseudocapacitive behaviour and structure10.1016/j.electacta.2018.11.047 ↗
39. Ten thousand-cycle ultrafast energy storage of Wadsley–Roth phase Fe–Nb oxides with a desolvation promoting interfacial layer10.1021/acs.nanolett.1c03478 ↗
40. FeNb11O29, anode material for high-power lithium-ion batteries: pseudocapacitance and symmetrisation unravelled with advanced electrochemical and in situ/operando techniques10.1016/j.electacta.2021.139077 ↗
41. Downsizing FeNb11O29 anode material through ultrafast solid-state microwave-assisted synthesis for enhanced electrochemical performance10.1016/j.jssc.2023.124444 ↗
42. FeNb11O29 and related niobate anodes for fast-charging lithium-ion batteries: a review
43. Editors' Choice—quantifying the impact of charge transport bottlenecks in composite cathodes of all-solid-state batteries10.1149/1945-7111/abf8d7 ↗
44. Investigating the influence of the effective ionic transport on the electrochemical performance of Si/C‐Argyrodite solid‐state composites10.1002/batt.202300211 ↗
45. Oscillographic polarography with periodical triangular voltage10.1135/cccc19480349 ↗
46. A cathode ray polarograph. Part II.—The current-voltage curves10.1039/TF9484400327 ↗
47. Recent advances in magnetic structure determination by neutron powder diffraction10.1016/0921-4526(93)90108-I ↗
48. Influence of the discretization methods on the distribution of relaxation times deconvolution: implementing radial basis functions with DRTtools10.1016/j.electacta.2015.09.097 ↗
49. Clarifying the relationship between redox activity and electrochemical stability in solid electrolytes10.1038/s41563-019-0576-0 ↗
50. Interfacial reactivity and interphase growth of argyrodite solid electrolytes at lithium metal electrodes10.1016/j.ssi.2017.07.005 ↗
51. A rapid synthesis of amorphous LiTaOCl4 solid electrolytes through a two-step reaction pathway for high-rate and long-cycling lithium batteries