journal article·2026-02Open access

Validation on electrocatalyst closed-loop circularity for high temperature PEMFC electrodes: Pt recovery, electrocatalyst synthesis, and performance evaluation

Raghunandan Sharma, Per Morgen, Saso Gyergyek, Mengfan Zhou, Fan Zhou, Na Li, Samuel Simon Araya, Vincenzo Liso, Søren Juhl Andreasen, Thomas Rieks Andersen, Shuang Ma Andersen

Abstract

Supply risk of Critical Raw Materials (CRMs) could be an essential bottleneck for further take-off of renewable energy conversion systems such as polymer electrolyte membrane fuel cells (PEMFCs). Here, we validate closed-loop recycling of Pt/C electrocatalyst from a high-temperature PEMFC (HT-PEMFC) stack. Due to their high hydrophobicity, Pt recovery from the HT-PEMFC electrodes poses different challenges compared to those in case of low-temperature PEMFCs; the recovery efficiency can be improved through enhanced mixing and reduced sample size. The Pt/C recycling process involved (i) Pt recovery, (ii) Pt/C synthesis and (iii) its electrocatalytic performance evaluation using half-cell and single cell configurations. The recovery of Pt was realized through a hydrometallurgical approach under mild conditions. Here, the overall Pt recovery efficiency of ∼83 % was achieved. Further, the recovered Pt was used to synthesize Pt/C electrocatalyst, which exhibited electrochemical performances comparable to that of the commercial reference Pt/C in half-cell configuration. Again, MEA with a 50 % recycled Pt/C blended anode shows a HT-PEMFC single cell polarization curve similar to that of a reference MEA, prepared using state-of-the-art Pt/C. The presented work demonstrates a viable route of sustainable material supply for HTPEM technologies and potentially beyond.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Platinum group metal flows of Europe, part 110.1111/j.1530-9290.2008.00087.x ↗
2. Direct leach approaches to Platinum Group Metal (PGM) ores and concentrates: a review10.1016/j.mineng.2015.04.015 ↗
3. Supply and demand of platinum group metals and strategies for sustainable management10.1016/j.rser.2024.114821 ↗
4. Mathieux · 2017
5. Low-PGM and PGM-Free catalysts for proton exchange membrane fuel cells: stability challenges and material solutions10.1002/adma.201908232 ↗
6. PGM-free oxygen-reduction catalyst development for proton-exchange membrane fuel cells: challenges, solutions, and promises10.1021/accountsmr.1c00226 ↗
7. Recent progress and viability of PGM-free catalysts for hydrogen evolution reaction and hydrogen oxidation reaction10.1021/acscatal.1c04948 ↗
8. PGM-free biomass-derived electrocatalysts for oxygen reduction in energy conversion devices: promising materials10.1007/s41918-023-00197-3 ↗
9. Recycling the Platinum Group metals: a European perspective10.1595/147106712X611733 ↗
10. Hydrometallurgical recovery/recycling of platinum by the leaching of spent catalysts: a review10.1016/j.hydromet.2012.11.012 ↗
11. Pyrometallurgical recycling processes for rare metals and platinum group metals
12. A green adaptation of the critical resource of platinum group metals (PGMs) from spent autocatalysts to electrocatalysts for renewable power conversion10.1039/D2SE00733A ↗
13. Electrolyzer and fuel cell recycling for a circular hydrogen economy10.1002/adsu.202300449 ↗
14. Process development and optimization for platinum recovery from PEM fuel cell catalyst10.1016/j.hydromet.2015.12.013 ↗
15. Pt/C electrocatalyst synthesis from recycling of the spent PEMFC membrane electrode assembly: a closed loop circular economy10.1149/2.0671913jes ↗
16. Environmentally and industrially friendly recycling of platinum nanoparticles through electrochemical dissolution–electrodeposition in Acid‐Free/Dilute acidic electrolytes10.1002/cssc.201801604 ↗
17. Recovery of Pt and Ru from spent low-temperature polymer electrolyte membrane fuel cell electrodes and recycling of Pt by direct redeposition of the dissolved precursor on carbon10.1021/acsaem.1c00964 ↗
18. Gram-size Pt/C catalyst synthesized using Pt compound directly recovered from an end-of-life PEM fuel cell stack10.1016/j.matchemphys.2021.125439 ↗
19. Characterization of the thermolysis products of nafion membrane: a potential source of perfluorinated compounds in the environment10.1038/srep09859 ↗
20. High temperature proton exchange membrane fuel cells: progress in advanced materials and key technologies10.1039/D0CS00296H ↗
21. A review of high-temperature proton exchange membrane fuel cell (HT-PEMFC) system10.1016/j.ijhydene.2016.06.211 ↗
22. Recovery of platinum and ruthenium from PEM electrodes via hydrometallurgical approach10.1007/s40831-025-01011-8 ↗
23. Correlation between the electrochemical durability of Pt/C catalysts and the surface functional groups of the support carbon10.1021/acsaem.2c03030 ↗
24. Reevaluation of XPS Pt 4f peak fitting: ti 3s plasmon peak interference and Pt metallic peak asymmetry in Pt@TiO2 system10.1116/6.0003973 ↗
25. Accurate determination of catalyst loading on glassy carbon disk and its impact on thin film rotating disk electrode for oxygen reduction reaction10.1021/acs.analchem.8b02697 ↗
26. Critical thinking on baseline corrections for electrochemical surface area (ECSA) determination of Pt/C through H-adsorption/H-desorption regions of a cyclic voltammogram10.1016/j.apcatb.2022.121351 ↗
27. Influence of the dispersion state of ionomer on the dispersion of catalyst ink and the construction of catalyst layer10.1016/j.ijhydene.2021.07.172 ↗
28. Phosphonated ionomer modulates electrochemical interfaces in high temperature polymer electrolyte membrane fuel cells10.1016/j.jechem.2024.11.055 ↗
29. Protonated phosphonic acid electrodes for high power heavy-duty vehicle fuel cells10.1038/s41560-021-00971-x ↗
30. An operationally flexible fuel cell based on quaternary ammonium-biphosphate ion pairs10.1038/nenergy.2016.120 ↗
31. Characterisation and electrical conductivity of polytetrafluoroethylene/graphite nanoplatelets composite films10.1007/s00339-019-2747-x ↗
32. Synthesis and characterization of high-purity ultrafine platinum particles by chemical refining method
33. Structural effects in electrocatalysis: oxygen reduction on platinum low index single-crystal surfaces in perchloric acid solutions10.1016/0022-0728(94)03467-2 ↗
34. Facile synthesis of nanoporous Pt-Encapsulated Ir Black as a bifunctional oxygen catalyst via modified polyol process at room temperature10.1002/celc.201900824 ↗
35. Platinum nanosheets synthesized via topotactic reduction of single-layer platinum oxide nanosheets for electrocatalysis10.1038/s41467-022-35616-4 ↗
36. Synthesis of a Pt/C electrocatalyst from a user-friendly Pt precursor (ammonium hexachloroplatinate) through microwave-assisted polyol synthesis10.1021/acsaem.9b01336 ↗
37. Electrochemical characterization of shape-controlled Pt nanoparticles in different supporting electrolytes10.1021/cs200681x ↗
38. Determination of the real surface area of Pt electrodes by hydrogen adsorption using cyclic voltammetry10.1021/ed077p1195 ↗
39. Achieving superior methanol oxidation electrocatalytic performance by surface reconstruction of PtNi nanoalloys during acid etching process10.1039/D2GC04490K ↗
40. A comprehensive review of Pt electrocatalysts for the oxygen reduction reaction: nanostructure, activity, mechanism and carbon support in PEM fuel cells10.1039/C6TA08580F ↗
41. Insight into the correlation of Pt–support interactions with electrocatalytic activity and durability in fuel cells10.1039/D0TA01530J ↗
42. Stability and durability under potential cycling of Pt/C catalyst with new surface-functionalized carbon support10.1016/j.ijhydene.2016.06.127 ↗
43. Carbon corrosion in proton-exchange membrane fuel cells: effect of the carbon structure, the degradation protocol, and the gas atmosphere10.1021/cs501973j ↗
44. Carbon corrosion properties and performance of multi-walled carbon nanotube support with and without nitrogen-functionalization in fuel cell electrodes10.1016/j.electacta.2019.135384 ↗
45. Carbon corrosion of proton exchange membrane fuel cell catalyst layers studied by scanning transmission X-ray microscopy10.1016/j.jpowsour.2014.04.119 ↗
46. Evaluation of thermal cycling on durability and PA loss in high temperature PEM fuel cells10.1016/j.jpowsour.2024.235411 ↗