journal article·2026-02Open access

Performance and durability of fuel cell cathodes with a Nafion/FEP binder

Xiaozong Fan, Xiaomin Xu, Peter Pintauro

Abstract

Improving the cathode durability of a proton-exchange membrane fuel cell remains a critical goal when determining the proper composition and design of a fuel cell membrane-electrode-assembly (MEA). Previous studies have shown that incorporating hydrophobic PVDF into the cathode binder enhances carbon corrosion resistance by accelerating product water removal, albeit at the cost of reduced power density. As an alternative to PVDF, the present study uses Teflon™ FEP (fluorinated ethylene propylene) and Nafion™ perfluorosulfonic acid as the cathode binder with either Pt/C or platinum group metal-free (PGM-free) catalyst powders. Sprayed Pt/C powder electrode MEAs with a cathode and anode catalyst loading of 0.1 mg/cm 2 and a cathode binder containing 30 wt% FEP exhibit a high initial power output (higher than with a neat Nafion binder) and no power loss after a carbon corrosion voltage cycling test. A binder of 50/50 wt ratio Nafion/FEP stabilizes the power output of a PGM-free cathode MEA, where the power density is twice that of the best Nafion/PVDF binder. The improved MEA performance is attributed to FEP's hydrophobic properties, its minimal impact on Nafion's proton conductivity, and the ability of a commercial FEP dispersion to minimize catalyst and binder agglomerates. • FEP added to Nafion improves the initial fuel cell power output with Pt/C catalyst. • Nafion/FEP binder stops carbon corrosion with minimal power loss for a Pt/C cathode. • FEP added to Nafion stabilizes long-term power output with a PGM-free cathode. • FEP outperforms hydrophobic PVDF, with less carbon corrosion and higher power.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Membrane-based Ion Separation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. PEM fuel cell electrodes10.1016/j.jpowsour.2003.12.055 ↗
2. Electrocatalyst and electrode design strategies for durable proton exchange membrane fuel cells10.1016/j.matt.2023.11.009 ↗
3. Structure, property, and performance of catalyst layers in Proton exchange membrane fuel cells10.1007/s41918-022-00175-1 ↗
4. Ordered CoPt oxygen reduction catalyst with high performance and durability
5. Surface decoration of platinum catalysts by ZrO 2– x nanoclusters for durable fuel cell applications10.1021/acscatal.3c05297 ↗
6. Revealing the atomic ordering of binary intermetallics using in situ heating techniques at multilength scales10.1073/pnas.1815643116 ↗
7. Recent advances in Pt-based electrocatalysts for PEMFCs10.1039/D0RA05468B ↗
8. Jeong
9. G. Oyunbileg, G. Batnyagt, W. Nagano, H. Wakita, K. Ui, T. Takeguchi, ORR Durability Study on Pt 3.7 Mn/KB, Pt 3.9 Co/KB and Pt 3.7 Ni/KB for heavy-duty Vehicle Operation, (n.d.). https://doi.org/10.1039/D5YA00059A..
10. Nanostructured thin film electrocatalysts - current status and future potential10.1149/1.3635628 ↗
11. Improvement of cell performance in low-pt-loading PEFC cathode catalyst layers prepared by the electrospray method10.1149/2.0611610jes ↗
12. High‐performance Nanofiber fuel cell electrodes10.1002/cssc.201100245 ↗
13. Nanofiber electrodes with low platinum loading for high power hydrogen/air PEM fuel cells10.1149/2.008308jes ↗
14. Fabrication, In-Situ performance, and durability of nanofiber fuel cell electrodes10.1149/2.0651501jes ↗
15. Power output and durability of electrospun fuel cell fiber cathodes with PVDF and Nafion/PVDF binders10.1149/2.0711605jes ↗
16. Electrospun fiber mat cathode with platinum-group-metal-free catalyst powder and Nafion/PVDF binder10.1002/celc.201800283 ↗
17. Nanofiber fuel cell MEAs with a PtCo/C cathode10.1149/2.0151907jes ↗
18. Impact of polyvinylidene fluoride on nanofiber cathode structure and durability in proton exchange membrane fuel cells10.1149/1945-7111/ab77fb ↗
19. Electrospun nanofiber electrodes for high and low humidity PEMFC operation10.1149/1945-7111/acb8e2 ↗
20. Highly durable platinum group metal-free catalyst fiber cathode MEAs for proton exchange membrane fuel cells10.1016/j.jpowsour.2023.233679 ↗
21. Ultralow platinum loading for redox-flow battery by electrospinning the electrocatalyst and the ionomer in core-shell fibers10.1016/j.est.2022.106430 ↗
22. Fabrication, morphology, and performance of fiber mat cathode MEAs with a MOF-based PGM-free catalyst10.1016/j.ijhydene.2025.01.356 ↗
23. Enhancing electrode efficiency in proton exchange membrane fuel cells with PGM-free catalysts: a mini review10.3390/en17143443 ↗
24. PGM-free oxygen-reduction catalyst development for proton-exchange membrane fuel cells: challenges, solutions, and promises10.1021/accountsmr.1c00226 ↗
25. Investigation of the corrosion of carbon supports in polymer electrolyte fuel cells using simulated start-up/shutdown cycling10.1016/j.electacta.2012.12.082 ↗
26. 3D analysis of fuel cell electrocatalyst degradation on alternate carbon supports10.1021/acsami.7b09716 ↗
27. Understanding and approaches for the durability issues of Pt-based catalysts for PEM fuel cell10.1016/j.jpowsour.2007.07.004 ↗
28. In situ and Ex situ characterization of carbon corrosion in PEMFCs10.1149/1.3484542 ↗
29. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests10.1149/2.0061806jes ↗
30. Local catalyst support degradation during polymer electrolyte fuel cell Start-Up and shutdown10.1149/2.019212jes ↗
31. Carbon support oxidation in PEM fuel cell cathodes10.1016/j.jpowsour.2007.08.053 ↗
32. Carbon corrosion in proton-exchange membrane fuel cells: from model experiments to real-life operation in membrane electrode assemblies10.1021/cs500449q ↗
33. Influence of the microporous layer on carbon corrosion in the catalyst layer of a polymer electrolyte membrane fuel cell10.1016/j.jpowsour.2012.04.086 ↗
34. Carbon corrosion in PEM fuel cells and the development of accelerated stress tests
35. Influence of electrodic properties on water management in a solid polymer electrolyte fuel cell10.1007/BF01092616 ↗
36. Effects of hydrophobic polymer content in GDL on power performance of a PEM fuel cell10.1016/j.electacta.2004.04.009 ↗
37. Effects of fabrication processes and material parameters of GDL on cell performance of PEM fuel cell10.1016/j.ijhydene.2007.02.003 ↗
38. Effect of hydrophobic gas diffusion layers on the performance of the polymer exchange membrane fuel cell10.1016/j.jpowsour.2009.02.017 ↗
39. Optimal microporous layer for proton exchange membrane fuel cell10.1016/j.jpowsour.2010.03.041 ↗
40. Effect of a GDL based on carbon paper or carbon cloth on PEM fuel cell performance10.1016/j.fuel.2010.09.003 ↗
41. Influence of FEP nanoparticles in catalyst layer on water management and performance of PEM fuel cell with high Pt loading10.1016/j.ijhydene.2016.11.037 ↗
42. DOE technical targets for polymer electrolyte membrane fuel cell components, Energy Gov. (n.d.). https://www.energy.gov/eere/fuelcells/doe-technical-targets-polymer-electrolyte-membrane-fuel-cell-components (accessed November 29, 2024).
43. Preparation and characterization of highly dispersed electrocatalytic materials
44. Surfactant-assisted catalyst ink dispersion for enhanced cell performance of proton exchange membrane fuel cells10.3390/catal15080790 ↗
45. Nafion/PVDF nanofiber composite membranes for regenerative hydrogen/bromine fuel cells10.1016/j.memsci.2015.04.044 ↗
46. Structural analyses of blended Nafion/PVDF electrospun nanofibers10.1039/C9CP01891C ↗
47. On the influence of oxygen on the degradation of Fe-N-C catalysts10.1002/anie.201912451 ↗
48. PGM-free cathode catalysts for PEM fuel cells: a mini-review on stability challenges10.1002/adma.201807615 ↗
49. O2 reduction mechanism on non-noble metal catalysts for PEM fuel cells. Part II: a porous-electrode model to predict the quantity of H2 O2 detected by rotating ring-disk electrode10.1021/jp900838x ↗
50. Platinum group metal-free electrocatalysts: effects of synthesis on structure and performance in proton-exchange membrane fuel cell cathodes10.1016/j.jpowsour.2017.02.067 ↗
51. The wettability of fluoropolymer surfaces: influence of surface dipoles10.1021/la700902h ↗
52. Critical surface tension and contact angle with water for various polymers, (n.d.). https://www.accudynetest.com/polytable_03_print.html?utm_source=chatgpt.com (accessed April 24, 2025).