journal article·2026-01Open access

Impedance modeling of PEM fuel cells incorporating catalyst-layer heterogeneity

Akihisa Tanaka, Gen Inoue, Keisuke Nagato

Abstract

Voltage losses in proton exchange membrane fuel cells stem from electrochemical reactions and tortuous mass transport arising from structural heterogeneity. Although physics-based impedance modeling is effective for analyzing losses, homogeneous models have been widely employed owing to their straightforward implementation and low computational cost; however, their applicability to real electrode structures is limited. Therefore, this study aims to develop an impedance modeling approach that incorporates heterogeneous catalyst layer (CL) structures. A heterogeneous continuum model incorporating the local properties of the constructed 3D CL structure was employed. Impedance spectra were computed by solving steady-state nonlinear equations and frequency-domain linearized equations for small perturbation amplitudes. The simulated impedance spectra were compared with experimental data using the distribution of relaxation times (DRT), and the cell-voltage dependence of DRT peaks and their frequencies were consistent, confirming model validity. The effect of current density, oxygen partial pressure, and relative humidity on impedance spectra and reaction–transport resistances was systematically investigated. At high current density or low oxygen partial pressure, not only oxygen-diffusion resistance but also proton-conduction resistance became significant, and the increase was reflected in the low-to-mid frequency range. The model enables the extraction of conductance distributions encompassing various reaction–transport contributions, facilitating microscopic analysis. A homogeneous model with the same macroscopic properties as the heterogeneous model yielded nearly identical DRT peak frequencies. However, the heterogeneous model showed greater polarization resistance and peak magnitudes, demonstrating the limitations of homogeneous models. The presented heterogeneous model enables advanced CL designs through macroscopic and microscopic impedance analyses.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Electrocatalysts for Energy Conversion · Electrochemical Analysis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. AC impedance technique in PEM fuel cell diagnosis-A review10.1016/j.ijhydene.2007.05.036 ↗
2. Kinetics of rapid electrode reactions10.1039/df9470100011 ↗
3. On porous electrodes in electrolyte solutions: I. Capacitance effects10.1016/0013-4686(63)80042-0 ↗
4. Recent progress in the use of electrochemical impedance spectroscopy for the measurement, monitoring, diagnosis and optimization of proton exchange membrane fuel cell performance10.1016/j.jpowsour.2020.228361 ↗
5. Impedance modelling of porous electrode structures in polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2019.227279 ↗
6. Rapid impedance modeling via potential step and current relaxation simulations10.1149/1.2772092 ↗
7. State-space modeling of the anodic SOFC system Ni, H2-H2O|YSZ10.1016/S0167-2738(01)01004-9 ↗
8. A new computational approach for SOFC impedance from detailed electrochemical reaction-diffusion models10.1016/j.ssi.2005.01.002 ↗
9. Can we quantify oxygen transport in the nafion film covering an agglomerate of Pt/C particles?10.1149/2.1261704jes ↗
10. Analytical impedance of two-layer oxygen transport media in a PEM fuel cell10.1016/j.elecom.2021.107187 ↗
11. Analytical impedance of PEM fuel cell cathode including oxygen transport in the channel, gas diffusion, and catalyst layers10.1149/1945-7111/ac5d97 ↗
12. Understanding single-phase water-management signatures in fuel-cell impedance spectra: a numerical study10.1016/j.electacta.2020.136204 ↗
13. Experimental and numerical investigation of the low-frequency inductive features in differential PEMFCs: Ionomer humidification and platinum oxide effects10.1149/1945-7111/acb3ff ↗
14. The effect of liquid saturation transients on PEM fuel cell impedance: inductive loop and instability of catalyst layer operation10.1149/1945-7111/ad5efd ↗
15. Advanced impedance modeling for micropatterned polymer electrolyte membrane fuel cells10.1016/j.jpowsour.2022.231937 ↗
16. Grooved electrodes for high-power-density fuel cells10.1038/s41560-023-01263-2 ↗
17. Comparative study of heterogeneous and homogeneous catalyst-layer models of PEM fuel cells10.1016/j.jpowsour.2025.236612 ↗
18. Heterogeneous catalyst-layer model-based analysis of loss mechanisms in polymer electrolyte membrane fuel cells10.1016/j.ijhydene.2024.08.438 ↗
19. Understanding mechanism of PTFE distribution in fibrous porous media10.1149/05002.0461ecst ↗
20. RW3D.m: three-dimensional random walk program for the calculation of the diffusivities in porous media10.1016/S0098-3004(01)00057-7 ↗
21. Kulikovsky · 2019
22. A linear kronig‐kramers transform test for immittance data validation10.1149/1.2044210 ↗
23. A method for improving the robustness of linear kramers-Kronig validity tests10.1016/j.electacta.2014.01.034 ↗
24. Approximability of impedance spectra by RC elements and implications for impedance analysis10.1016/j.elecom.2015.05.018 ↗
25. Karlsruhe Institute of Technology, Kramers-kronig validity test Lin-KK for impedance spectra, (n.d.). https://www.iam.kit.edu/et/english/Lin-KK.php..
26. Theoretical examination of effective oxygen diffusion coefficient and electrical conductivity of polymer electrolyte fuel cell porous components10.1016/j.jpowsour.2016.07.107 ↗
27. The determination of the optimum accelerating factor for successive over-relaxation10.1093/comjnl/4.1.73 ↗
28. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
29. Advanced impedance study of polymer electrolyte membrane single cells by means of distribution of relaxation times10.1016/j.jpowsour.2018.09.004 ↗
30. Experimental and modelling studies of low temperature PEMFC performance10.1016/j.ijhydene.2020.01.019 ↗
31. Enhancement of the electroreduction of oxygen on Pt alloys with Fe, Ni, and Co10.1149/1.1392544 ↗
32. Bard · 2022
33. Analysis and modeling of PEMFC degradation: effect on oxygen transport10.1016/j.jpowsour.2012.04.069 ↗
34. Unraveling the elusive oxygen reduction reaction electrokinetics and energetics in PEM fuel cells10.1016/j.electacta.2022.141591 ↗
35. An improved two-dimensional agglomerate cathode model to study the influence of catalyst layer structural parameters10.1016/j.electacta.2004.12.009 ↗
36. Capacitance of the double-layer at polycrystalline Pt electrodes bearing a surface-oxide film10.1016/S0022-0728(02)00676-9 ↗
37. A parametric study of PEM fuel cell performances10.1016/S0360-3199(02)00284-7 ↗
38. A general model of proton exchange membrane fuel cell10.1016/j.jpowsour.2008.03.047 ↗
39. Interpretation of low-frequency inductive loops in PEM fuel cells10.1149/1.2789377 ↗
40. Analysis of damjanović kinetics of the oxygen reduction reaction: stability, polarization curve and impedance spectra10.1016/j.jelechem.2014.11.014 ↗
41. A model for PEM fuel cell impedance: oxygen flow in the channel triggers spatial and frequency oscillations of the local impedance10.1149/2.0911509jes ↗
42. PEM fuel cell distribution of relaxation times: a method for the calculation and behavior of an oxygen transport peak10.1039/D0CP02094J ↗
43. Increase in adsorptivity of sulfonate anions on Pt (111) surface with drying of ionomer10.1016/j.elecom.2013.09.005 ↗
44. Translating insights from experimental analyses with single-crystal electrodes to practically-applicable material development strategies for controlling the Pt/ionomer interface in polymer electrolyte fuel cells