Coarse-grained physics-based modelling for tape casting of fuel-electrode supports in Solid Oxide Cells
Source abstract
Abstract
Optimising the tape casting process for fabricating NiO/YSZ cermet-based fuel-electrode supports in Solid Oxide Cells remains a resource-intensive challenge. Improving the green tape properties are often reliant on trial-and-error procedures or proprietary knowledge that is inaccessible to the broader scientific community. In this work, we use computational simulations as a powerful tool to link the manufacturing process to the final microstructure of the tape. A novel three-dimensional physics-based model is presented to simulate the slip preparation and the homogeneous drying process of the tape casting producing the fuel electrode support in Solid Oxide Cells. Our model is well-calibrated to experimental data, and we investigate the dried microstructure of the simulated support. • Discrete Element Method for the fuel-electrode substrate manufacturing. • Fitted and validated force fields for the solvent-based slurry of the substrate. • First model to link manufacturing process to physical properties of the green tape. • Simulated green tape microstructure of the fuel-electrode substrate. • Cross-sectional views of the calculated green tape are extracted from the DEM model.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Novel high-performance solid oxide fuel cells with bulk ionic conductance dominated thin-film electrolytes10.1016/j.jpowsour.2012.06.087 ↗
2. A critical review of key materials and issues in solid oxide cells
3. 9 - solid oxide fuel and electrolysis cells
4. Materials and manufacturing technologies for solid oxide fuel cells10.1007/s10853-010-4279-9 ↗
5. Solid oxide fuel cell development at forschungszentrum Juelich10.1002/fuce.200600039 ↗
6. Recycling strategies for solid oxide cells10.1002/aenm.202201805 ↗
7. N.Q. Minh · 2011
8. Components manufacturing for solid oxide fuel cells10.1016/S0167-2738(02)00344-2 ↗
9. Electrochemical characterization and modelling of anode and electrolyte supported solid oxide fuel cells10.3389/fenrg.2021.668964 ↗
10. Anode supported solid oxide fuel cells (SOFC) by electrophoretic deposition10.1016/j.ijhydene.2011.02.100 ↗
11. A review of solid oxide fuel cell component fabrication methods toward lowering temperature10.1002/er.4907 ↗
12. Anode-supported solid oxide fuel cell achieves 70 000 hours of continuous operation10.1002/ente.201600114 ↗
13. Performance benchmark of planar solid oxide cells based on material development and designs10.1002/ente.202001062 ↗
14. A high-performance cathode for the next generation of solid-oxide fuel cells10.1038/nature02863 ↗
15. A diesel-driven, metal-based solid oxide fuel cell10.1016/j.jpowsour.2013.10.100 ↗
16. Improved solid oxide fuel cell performance with nanostructured electrolytes10.1021/nn201354p ↗
17. Recent progress in the development of anode materials for solid oxide fuel cells10.1002/aenm.201100108 ↗
18. Fabrication and evaluation of Ni-GDC composite anode prepared by aqueous-based tape casting method for low-temperature solid oxide fuel cell10.1016/j.ijhydene.2009.09.101 ↗
19. Tape casting fabrication, co-sintering and optimisation of anode/electrolyte assemblies for SOFC based on BIT07-Ni/BIT0710.1016/j.ijhydene.2011.11.140 ↗
20. Richard E. Mistler · 2000
21. Fabrication and characterization of anode-supported electrolyte thin films for intermediate temperature solid oxide fuel cells10.1016/j.jpowsour.2004.07.013 ↗
22. Tape-casting: Relationship between organic constituents and the physical and mechanical properties of tapes10.1016/0955-2219(95)90360-U ↗
23. A versatile strategy for hybridizing small experimental and large simulation data: A case for ceramic tape-casting process10.1016/j.matdes.2023.112357 ↗
24. Ceramic tape casting: A review of current methods and trends with emphasis on rheological behaviour and flow analysis10.1016/j.mseb.2016.07.011 ↗
25. Flow properties of PLZTN aqueous suspensions for tape casting10.1016/j.ceramint.2010.03.011 ↗
26. Modelling the effects of measured anode triple-phase boundary densities on the performance of micro-tubular hollow fiber SOFCs
27. Quantitative relationships between composition, particle size, triple phase boundary length and surface area in nickel-cermet anodes for Solid Oxide Fuel Cells10.1016/j.jpowsour.2010.08.006 ↗
28. 3D microstructural characterization of a solid oxide fuel cell anode reconstructed by focused ion beam tomography10.1016/j.jpowsour.2011.03.060 ↗
29. X-ray nano computerised tomography of SOFC electrodes using a focused ion beam sample-preparation technique10.1016/j.jeurceramsoc.2010.02.004 ↗
30. Characterization and analysis methods for the examination of the heterogeneous solid oxide fuel cell electrode microstructure: Part 2. quantitative measurement of the microstructure and contributions to transport losses
31. Ryan · 2019
32. Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction10.1016/j.jpowsour.2008.06.029 ↗
33. Stochastic 3D modeling of complex three-phase microstructures in SOFC-electrodes with completely connected phases10.1016/j.commatsci.2016.03.013 ↗
34. High-throughput 3D reconstruction of stochastic heterogeneous microstructures in energy storage materials10.1038/s41524-019-0149-4 ↗
35. The effect of process parameters on the apparent defects of tape-cast SOFC half-cell
36. Effects of anode fabrication parameters on the performance and redox behavior of solid oxide fuel cells10.1016/j.jpowsour.2014.02.023 ↗
37. The role of tape thickness on mechanical properties and performance of electrolyte supports in solid oxide fuel cells10.1016/j.ceramint.2018.06.205 ↗
38. 2022
39. Accelerated optimization methods for force-field parametrization in battery electrode manufacturing modeling10.1002/batt.202000049 ↗
40. Carbon-binder migration: A three-dimensional drying model for Lithium-Ion battery electrodes10.1016/j.ensm.2021.09.015 ↗
41. The ARTISTIC online calculator: Exploring the impact of Lithium-Ion battery electrode manufacturing parameters interactively through your browser
42. Investigating electrode calendering and its impact on electrochemical performance by means of a new discrete element method model: Towards a digital twin of Li-Ion battery manufacturing10.1016/j.jpowsour.2020.229320 ↗
43. Three-dimensional physical modeling of the wet manufacturing process of solid-state battery electrodes10.1016/j.jpowsour.2023.233427 ↗
44. Simulating solid-state battery cathode manufacturing via wet-processing with resolved active material geometries
45. A review on solid oxide fuel cell durability: Latest progress, mechanisms, and study tools
46. Optimization and characterization of porous Ni/YSZ anode microstructure for solid oxide fuel cell10.1016/j.ceramint.2025.02.021 ↗
47. Large-area 3D printed electrolyte-supported reversible solid oxide cells10.1016/j.electacta.2023.143074 ↗
48. Tape casting of anode supports for solid oxide fuel cells at Forschungszentrum Jülich10.1111/j.1744-7402.2012.02839.x ↗
49. A review of multi-scale modelling of concrete deterioration: Fundamentals, techniques and perspectives10.1016/j.conbuildmat.2023.133472 ↗
50. Hong · 1997
51. 2025
52. LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales10.1016/j.cpc.2021.108171 ↗
53. Experimentally validated three-dimensional modeling of organic-based sodium-ion battery electrode manufacturing10.1002/batt.202200116 ↗
54. Cohesion10.1088/0959-5309/43/5/301 ↗
55. pair_style lj/cut command – lammps documentation.
56. Surface energy and contact of elastic solids
57. pair_style granular command – lammps documentation.
58. 2022
59. Effect of slurry properties on anode cermets for solid oxide fuel cells10.1016/0032-5910(96)03114-2 ↗
60. Study of the rheological behavior of an anode slurry and the microstructural properties of an anode functional film obtained by spray coating10.1016/j.powtec.2009.01.022 ↗
61. Solvent effects on the morphology and performance of the anode substrates for solid oxide fuel cells10.1016/j.jpowsour.2017.07.110 ↗
62. Non-Newtonian fluid flow model for ceramic tape casting10.1016/S0921-5093(99)00691-7 ↗
63. Concrete rheology: A basis for understanding chemical admixtures10.1016/B978-0-08-100693-1.00007-2 ↗
64. Characteristics of a fluid10.1016/B978-0-08-102437-9.00002-4 ↗
65. 2022
66. Influence of the total porosity on the properties of sintered materials—a review10.3390/met11050730 ↗