Electrochemical and electronic properties of electrospun NiO–SnO2 nanofibers: Influence of heterojunction composition on energy storage behavior
Source abstract
Abstract
In this study, heterostructured nanocomposites based on various ratios of NiO and SnO 2 (NS1‒75:25, NS2‒50:50, and NS3‒25:75; %) and pure NiO and SnO 2 were prepared via the electrospinning-calcination method and evaluated for their energy storage performance. Structural and morphological investigations confirmed the formation of nanostructured materials with variable compositions. Porosity analysis revealed that prepared materials exhibited moderate to high specific surface area, between 9.2 and 38.4 m 2 ×g −1 . Morphological images supported these findings, showing interconnected, porous morphologies with various granulations. Mott–Schottky measurements revealed a gradual shift of the flat-band potential, indicating an increased charge carrier density, as a higher amount of NiO was used. Electrochemical performance was evaluated using cyclic voltammetry and galvanostatic charge-discharge techniques. The NS1 sample delivered the highest specific capacitance of 102.86 F × g −1 (cyclic voltammetry, scan rate of 5 mV × s −1 ) and 55.11 F × g −1 (galvanostatic charge-discharge, charging current of 0.1 A), alongside an energy density of 1.91 Wh × kg −1 (charging current of 0.1 A) and a power density of 850.34 W × kg −1 (charging current of 5 A). Then, the stability tests over 500 cycles ( Δ V = 0.5 V, capacitance retention up to 80.2 %) or 2000 cycles ( Δ V = 0.45 V, capacitance retention up to 88.1 %) revealed promising results.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Transition Metal Oxide Nanomaterials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. Transition metal oxides for organic electronics: energetics, device physics and applications10.1002/adma.201201630 ↗
2. Metal oxides for optoelectronic applications10.1038/nmat4599 ↗
3. Wide bandgap oxide semiconductors: from materials physics to optoelectronic devices10.1002/adma.202006230 ↗
4. Oxide spin-orbitronics: spin-Charge interconversion and topological spin textures10.1038/s41578-021-00395-9 ↗
5. Oxide spintronics as a knot of physics and chemistry: recent progress and opportunities10.1021/acs.jpclett.2c02634 ↗
6. Catalytically influential features in transition metal oxides10.1021/acscatal.1c04393 ↗
7. Analysis of the limitations in the oxygen reduction activity of transition metal oxide surfaces10.1038/s41929-021-00618-w ↗
8. 1D metal oxide semiconductor materials for chemiresistive gas sensors: a review10.1002/aelm.202100271 ↗
9. Advances in noble metal-decorated metal oxide nanomaterials for chemiresistive gas sensors: overview10.1007/s40820-023-01047-z ↗
10. Review on metals and metal oxides in sustainable energy production: progress and perspectives10.1021/acs.energyfuels.2c03396 ↗
11. Recent development on transition metal oxides-based core-shell structures for boosted energy density supercapacitors10.1002/smll.202312179 ↗
12. Difficulties, strategies, and recent research and development of layered sodium transition metal oxide cathode materials for high-energy sodium-ion batteries10.1016/j.jechem.2023.10.023 ↗
13. Tuning electrical properties of polythiophene/nickel nanocomposites via fabrication10.1016/j.matdes.2019.108027 ↗
14. Synergistic effect of noble metal doping and composite formation to boost the electrochemical properties of vanadium pentoxide10.1016/j.ceramint.2022.07.273 ↗
15. Self-supporting design of NiS/CNTs nanohybrid for advanced electrochemical energy storage applications10.1007/s10876-021-02138-w ↗
16. Fabrication of graphene supported binary nanohybrid with multiple approaches for electrochemical energy storage applications10.1016/j.synthmet.2020.116645 ↗
17. Facile solvothermal synthesis of NiFe2O4 nanoparticles for high-performance supercapacitor applications10.1007/s11706-020-0499-3 ↗
18. A porous graphene–NiFe2O4 nanocomposite with high electrochemical performance and high cycling stability for energy storage applications10.1039/D0NA00440E ↗
19. Elevated asymmetric supercapacitor with the nickel-metal organic framework derived nickel oxide/nickel composite: designed to optimize efficiency and reliability10.1016/j.electacta.2024.145134 ↗
20. SnO2 doped NiO heterostructure nanofibers prepared by electrostatic spinning: a novel sensor for catalytic oxidation of formaldehyde10.1016/j.microc.2022.107579 ↗
21. Synergetic crystal phases of SnO2/NiO heterostructure in an interconnected morphology for chemiresistive formaldehyde sensors10.1016/j.snb.2023.135257 ↗
22. SnO2 (n)-NiO (p) composite nanowebs: gas sensing properties and sensing mechanisms10.1016/j.snb.2017.11.063 ↗
23. NiO nanoparticle-decorated SnO2 nanosheets for ethanol sensing with enhanced moisture resistance10.1038/s41378-019-0060-7 ↗
24. Room-temperature nitric oxide gas sensors based on NiO/SnO2 heterostructures10.3390/s23208583 ↗
25. Green synthesis of NiO-SnO2 nanocomposite and effect of calcination temperature on its physicochemical properties: impact on the photocatalytic degradation of methyl orange10.3390/molecules27238420 ↗
26. On a theory of the Van der Waals adsorption of gases10.1021/ja01864a025 ↗
27. Toward reliable reference electrode calibration in alkaline solution10.1021/acsenergylett.5c01269 ↗
28. Multi-functional materials based on Cu-doped TiO2 ceramic fibers with enhanced pseudocapacitive performances and their dielectric characteristics10.3390/polym14214739 ↗
29. Solution combustion synthesis of SnO2–NiO p–n heterojunction nanocomposite for photocatalytic application10.1007/s10854-018-9794-5 ↗
30. Synthesis of mesoporous SnO2/NiO nanocomposite using modified sol–gel method and its electrochemical performance as electrode material for supercapacitors10.1038/s41598-020-67990-8 ↗
31. 1 % lanthanide-doped ZnO nanostructures as a versatile approach for state-of-the-art capacitive and resistive humidity sensors10.1016/j.ceramint.2025.01.484 ↗
32. Electrochemistry and band structure of semiconductors (TiO2, SnO2, ZnO): avoiding pitfalls and textbook errors10.1007/s10008-023-05770-w ↗
33. Dielectric properties of cobalt oxide, nickel oxide, and their mixed crystals10.1063/1.1714397 ↗
34. First-principles exploration into the physical and chemical properties of certain newly identified SnO2 polymorphs10.1021/acsomega.1c07063 ↗
35. Synthesis and characterization of Mg-doped ZnO thin-films electrochemically grown on fto substrates for optoelectronic applications10.1039/D0RA06541B ↗
36. Self-organized growth of two-dimensional gate nanosheet on ZnO nanowires for heterojunctional water splitting applications10.1021/acsami.7b04199 ↗
37. Stokes shift, blue shift and red shift of ZnO-based thin films deposited by pulsed-laser deposition10.1016/j.jcrysgro.2006.03.036 ↗
38. Optical and structural properties of Zn1−xMgxO ceramic materials10.1007/s00339-014-8279-5 ↗
39. How to correctly determine the band gap energy of modified semiconductor photocatalysts based on UV-Vis spectra10.1021/acs.jpclett.8b02892 ↗
40. Band gap narrowing and fluorescence properties of nickel doped sno nanoparticles10.1016/j.jlumin.2010.07.017 ↗
41. Boosting the electrochemical activities of MnO2 for next-generation supercapacitor application: adaptation of multiple approaches10.1016/j.fuel.2023.127946 ↗
42. Towards colourless-to-green electrochromic smart glass based on a redox active polymeric semiconductor containing carbazole moiety10.1016/j.dyepig.2020.108328 ↗
43. The coloration and degradation mechanisms of electrochromic nickel oxide10.1016/j.solmat.2013.03.042 ↗
44. Influence of supporting electrolytes on the structure of electrodeposited SnO2 thin films for energy storage applications10.1007/s11581-016-1709-y ↗
45. Phosphorization boosts the capacitance of mixed metal nanosheet arrays for high performance supercapacitor electrodes10.1039/C8NR01229F ↗
46. Pseudocapacitive contributions to electrochemical energy storage in TiO2 (anatase) nanoparticles10.1021/jp074464w ↗
47. A novel pseudocapacitance mechanism of elm seed-like mesoporous MoO3−x nanosheets as electrodes for supercapacitors10.1039/C6TA06326H ↗
48. Overcoming diffusion limitation of faradaic processes: property-performance relationships of 2D conductive metal-organic framework cu3(hhtp)2 for reversible lithium-ion storage10.1002/anie.202303111 ↗
49. Faradaic and non-Faradaic contributions to the power and energy characteristics of electrolytic manganese dioxide for electrochemical capacitors10.1149/2.0401606jes ↗
50. Materials for electrochemical capacitors10.1038/nmat2297 ↗
51. Carbon-based materials as supercapacitor electrodes10.1039/b813846j ↗
52. Supercapacitor studies on NiO nanoflakes synthesized through a microwave route10.1021/am400012h ↗
53. A high-performance hybrid supercapacitor with NiO derived NiO@Ni-MOF composite electrodes10.1016/j.electacta.2020.135956 ↗
54. The preparation of hierarchical flowerlike NiO/reduced graphene oxide composites for high performance supercapacitor applications10.1021/ef401190b ↗
55. Evaluation of nickel oxide-copper oxide nano flowers from saponin for hybrid supercapacitor applications10.1016/j.inoche.2024.112145 ↗
56. Electrospun TiO2 nanofiber electrodes for high performance supercapacitors10.1088/2053-1591/ab688c ↗
57. Porous graphene–NiCo2O4 nanorod hybrid composite as a high performance supercapacitor electrode material10.1039/C9NJ05725K ↗
58. Simple solvothermal synthesis of porous graphene-NiO nanocomposites with high cyclic stability for supercapacitor application10.1016/j.jallcom.2020.157190 ↗
59. Hassle-free solvothermal synthesis of NiO nanoflakes for supercapacitor application10.1016/j.physb.2021.412959 ↗
60. Exploring the potential of CoAl2O4 nanoflakes in supercapacitor applications
61. Eco-friendly synthesis of porous graphene and its utilization as high performance supercapacitor electrode material10.1016/j.jallcom.2019.05.302 ↗
62. Nanostructured Ag/NiO composites for supercapacitor and antibacterial applications, and in-silico theoretical investigation10.1016/j.jpcs.2023.111730 ↗
63. One-step potential-cycling method to fabricate NiO nanospheres for high performance supercapacitor application10.1016/j.est.2024.111134 ↗
64. Ultra-high supercapacitor performance of NiSRu@NiO nanocomposites on nickel foam electrodes10.1016/j.est.2024.110679 ↗
65. Development of highly efficient supercapacitor based on a ternary (Sr(OH)2/CoO(OH)/Mn(O)2) composite: with tuberose mesoporous nanospheres structure10.1016/j.est.2023.110140 ↗