Mechanistic insight of Li cluster formation and dendrite deposition in sulfide all-solid-state battery with hard-carbon electrode analyzed using 7Li operando nuclear magnetic resonance
Source abstract
Abstract
Because lithium dendrite deposition during charging and discharging of all solid-state batteries (ASSLBs) is an important difficulty leading to deactivation, precise analysis of the lithium state is indispensable. We explored the potential use of hard-carbon (HC) for an ASSLB anode using operando 7 Li NMR to investigate lithium behavior. Cells using circular electrodes capable of applying constraint pressure to the electrode material were fabricated to achieve precise operando NMR measurements for sulfur-based ASSLBs. Adsorption and desorption behaviors of lithium in HC were found to be nearly identical to those of HC in liquid LIBs. However, short circuits occurred after several hours of constant current overlithiation or potential holding at −5.5 mV although no clear amplification of Li dendrite signal was observed. Signal components attributable to quasimetallic clusters were observed in both cases, which suggests that lithium can form clusters in open pores or on the HC surface during overlithiation. Clusters in the open pores or surface can conduct electricity and may serve as nucleation sites for dendrite growth. Although the use of HC anodes can suppress dendrite formation in ASSLBs, more precise voltage control is required than that used for liquid LIBs. • The potential use of hard-carbon for an ASSLB anode was explored using operando NMR. • Operando 7 Li NMR reveals lithium cluster and dendrite behaviors in ASSLBs. • Quasimetallic Li in open pores or surfaces can induce short-circuits. • More precise control than liquid LIBs is required to prevent short-circuit.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
2. A review on the key issues for lithium-ion battery management in electric vehicles10.1016/j.jpowsour.2012.10.060 ↗
3. Recent development of sulfide solid electrolytes and interfacial modification for all-solid-state rechargeable lithium batteries10.1016/j.jascer.2013.03.005 ↗
4. The lithium-ion battery: state of the art and future perspectives10.1016/j.rser.2018.03.002 ↗
5. Designing solid-state electrolytes for safe, energy-dense batteries10.1038/s41578-019-0165-5 ↗
6. Long cycle life all-solid-state batteries enabled by solvent-free approach for sulfide solid electrolyte and cathode films
7. Challenges and optimization strategies at the interface between sulfide solid electrolyte and lithium anode
8. Lithium/sulfide all-solid-state batteries using sulfide electrolytes
9. A lithium superionic conductor10.1038/nmat3066 ↗
10. High-power all-solid-state batteries using sulfide superionic conductors10.1038/nenergy.2016.30 ↗
11. Review of various sulfide electrolyte types for solid-state lithium-ion batteries10.1515/eng-2022-0043 ↗
12. Sulfide-based solid-state electrolytes: synthesis, stability, and potential for all-solid-state batteries10.1002/adma.201970311 ↗
13. Li6PS5Cl microstructure and influence on dendrite growth in solid-state batteries with lithium metal anode
14. Interfacial challenges and strategies toward practical sulfide-based solid-state lithium batteries10.34133/energymatadv.0022 ↗
15. Growth of lithium-indium dendrites in all-solidstate lithium-based batteries with sulfide electrolytes10.1038/s41467-021-27311-7 ↗
16. Perspective on powder technology for all-solid-state batteries: how to pair sulfide electrolyte with high-voltage cathode10.1016/j.partic.2023.04.005 ↗
17. Non-linear kinetics of the lithium metal anode on Li6PS5Cl at high current density: dendrite growth and theRole of lithium microstructure on creep10.1002/advs.202302521 ↗
18. In situ methods for Li-ion battery research: a review of recent developments10.1016/j.jpowsour.2015.04.084 ↗
19. Operando characterization of batteries using x-ray absorption spectroscopy: advances at the beamline XAFS at synchrotron elettra
20. Operando XRD analysis of self-discharge induced by elevated temperature for sulfide-based all-solid-state Li-ion batteries10.1016/j.jpowsour.2025.237577 ↗
21. Operando combined SAXS/XRD/XAFS measurements of lithium conversion battery
22. In operando closed-cell transmission electron microscopy for rechargeable battery characterization: scientific breakthroughs and practical limitations10.1016/j.nanoen.2022.107083 ↗
23. In-situ high-resolution scanning electron microscopy observation of electrodeposition and stripping of lead in an electrochemical cell10.35848/1347-4065/abe640 ↗
24. In-operando high-speed tomography of lithium-ion batteries during thermal runaway10.1038/ncomms7924 ↗
25. Visualization and quantification of electrochemical and mechanical degradation in li ion batteries10.1126/science.1241882 ↗
26. Operando raman spectroscopy insights into the electrochemical formation of F-Graphite intercalation compounds10.1021/acsenergylett.4c00130 ↗
27. Understanding rechargeable battery function using in operando neutron powder diffraction10.1002/adma.201904528 ↗
28. A cylindrical cell for operando neutron diffraction of Li-ion battery electrode materials10.3389/fenrg.2018.00076 ↗
29. Enabling operando neutron diffraction for solid-state battery studies10.1021/acsmaterialslett.5c00596 ↗
30. Han · Nat. Energy · 2019 · 4 · 18710.1038/s41560-018-0312-z ↗
31. Visualizing plating-induced cracking in lithium-anode solid-electrolyte cells10.1038/s41563-021-00967-8 ↗
32. The first in situ 7Li nuclear magnetic resonance study of lithium insertion in hard-carbon anode materials for Li-ion batteries10.1063/1.1556092 ↗
33. In situ 7Li nuclear magnetic resonance observation of the electrochemical intercalation of lithium in graphite: first cycle10.1016/j.carbon.2006.12.018 ↗
34. In situ solid-state NMR spectroscopy of electrochemical cells: batteries, supercapacitors, and fuel cells10.1021/ar400022u ↗
35. In situ 7Li nullear magnetic resonance study of the relaxation effect in practical lithium ion batteries10.1016/j.carbon.2014.07.080 ↗
36. In situ NMR observation of the lithium extraction/insertion from LiCoO2 cathode10.1016/j.electacta.2013.06.120 ↗
37. Materials' methods: NMR in battery research10.1021/acs.chemmater.6b03183 ↗
38. A battery cell for in situ NMR measurements of liquid electrolytes10.1039/C6CP08653E ↗
39. Long-run in operando NMR to investigate the evolution and degradation of battery cells10.1039/C8CP01067F ↗
40. Operando NMR of NMC811/Graphite lithium-ion batteries: structure, dynamics, and lithium metal deposition10.1021/jacs.0c06727 ↗
41. Transient lithium metal plating on graphite: operando 7Li nullear magnetic resonance investigation of a battery cell using a novel RF probe10.1016/j.carbon.2021.12.082 ↗
42. In-Plane ordering of Li-Intercalated turbostratic graphite for the negative electrode of high-power long-life Li-Ion batteries10.1149/1945-7111/acde63 ↗
43. Probing sodium structures and dynamics in hard carbon for Na-ion batteries using 23Na operando solid-state NMR spectroscopy10.1039/D4TA07135B ↗
44. 23Na solid-state NMR analyses for Na-Ion batteries and materials10.1002/batt.202000295 ↗
45. Mechanisms for overcharging of carbon electrodes in lithium-ion/sodium-ion batteries analysed by operando solid-state NMR10.1039/D0TA04005C ↗
46. Understanding the failure process of sulfide-based all-solid-state lithium batteries via operando nuclear magnetic resonance spectroscopy10.1038/s41467-023-35920-7 ↗
47. Disentangling the Li-Ion transport and boundary phase transition processes in Li10GeP2S12 electrolyte by In-Operando high-pressure and high-resolution NMR spectroscopy
48. Properties of a novel hard-carbon optimized to large size Li ion secondary battery studied by 7Li NMl10.1016/j.jpowsour.2006.09.001 ↗
49. 7Li NMR studies on a lithiated non-graphitizable carbon fibre at low temperatures10.1039/a700221a ↗
50. Structural evolution by heat treatment of soft and hard carbons as Li storage materials: a joint NMR/XRD/TEM/Raman study10.1039/D4TA08096C ↗
51. Mechanistic insights into the reversible lithium storage in an open porous carbon via metal cluster formation in all solid-state batteries10.1016/j.carbon.2021.11.061 ↗
52. Studying the growth and morphology of metal microstructures in sodium metal batteries with ionic liquid electrolytes by operando 23Na NMR spectroscopy10.1016/j.nanoen.2024.110479 ↗
53. Unveiling the mechanical and electrochemical evolution of Nanosilicon composite anodes in sulfide-based all-solid-state batteries10.1002/aenm.202203969 ↗
54. In situ NMR of lithium ion batteries: bulk susceptibility effects and practical considerations10.1016/j.ssnmr.2012.01.004 ↗
55. Evidencing phase transformations of Li6PS5Cl argyrodite under ambient air and dry room exposure10.1021/acsami.4c11458 ↗
56. Analysis of hard carbon for lithium-ion batteries by hard X-ray photoelectron spectroscopy10.1016/j.jpowsour.2013.05.160 ↗
57. In situ NMR of lithium ion batteries: bulk susceptibility effects and practical considerations10.1016/j.ssnmr.2012.01.004 ↗
58. Correlating local structure and sodium storage in hard carbon anodes: insights from pair distribution function analysis and solid-state NMR10.1021/jacs.1c06058 ↗