journal article·2026-01Open access

Interfacial engineering of conformal titanium oxide nanofilms on porous carbon supercapacitor electrodes via atomic layer deposition

Remuel Isaac M. Vitto, Hamed Pourkheirollah, Jari Keskinen, Steffen Vindt, Andrew Cook, Līga Grīnberga, Līga Ignatāne, Gints Kučinskis, Aleksandrs Volperts, Amit Tewari, Donald Lupo, Paul R. Berger, Matti Mäntysalo

Abstract

We report the development of an atomic layer deposition (ALD) process for depositing titanium dioxide (TiO 2 ) nanofilms onto porous activated carbon (AC) electrodes to enhance the electrochemical performance of supercapacitors. This study investigates previously unexplored aspects of the ALD process, including the influence of precursor pulse duration and film thickness on the deposition behavior within complex porous AC structures. The deposited TiO 2 nanofilms were amorphous and exhibited excellent uniformity and conformality across the AC surface. Electrochemical measurements revealed a combination of surface redox and intercalation-type pseudocapacitance, with surface redox reactions identified as the dominant energy storage mechanism. An optimal balance between accessible surface area and film thickness was achieved at 60 ALD cycles, corresponding to a TiO 2 film thickness of approximately 2.3 nm. Under these conditions, the specific capacitance of TiO 2 -coated supercapacitors exceeded that of bare AC electrodes, owing to the additional pseudocapacitance contributed by the TiO 2 layer. These findings demonstrate an effective strategy for utilizing ALD to engineer advanced electrode materials for high-performance supercapacitors. • Interfacial decoration of TiO 2 nanofilms on AC supercapacitors via ALD technique. • Highly uniform and conformal TiO 2 nanofilms observed in SEM/cross-sectional TEM. • The TiO 2 /AC demonstrate higher capacitance during extensive charge-discharge cycles. • New insights on next generation supercapacitors based TiO 2 ALD-coated AC electrodes.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Supercapacitor Materials and Fabrication · Mesoporous Materials and Catalysis · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Towards enhanced energy density of graphene-based supercapacitors: current status, approaches, and future directions10.1016/j.jpowsour.2018.06.004 ↗
2. Maximizing energy density of lithium-ion batteries for electric vehicles: a critical review10.1016/j.egyr.2023.08.069 ↗
3. A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles10.1016/j.rser.2016.05.033 ↗
4. Supercapacitors for renewable energy applications: a review10.1016/j.mne.2023.100229 ↗
5. Carbon-based supercapacitors for efficient energy storage10.1093/nsr/nwx009 ↗
6. An intuitive review of supercapacitors with recent progress and novel device applications10.1016/j.est.2020.101652 ↗
7. One-step hydrothermal synthesis and electrocatalytic properties of MOS2/activated carbon composite derived from shallots10.1007/s10800-023-01921-z ↗
8. Chemical mapping and electrochemical performance of manganese dioxide/activated carbon based composite electrode for asymmetric electrochemical capacitor10.1149/2.0181505jes ↗
9. Synthesis of NIO/Activated carbon composites and their application as electrode materials for capacitors10.20964/2017.04.39 ↗
10. Electrodeposited manganese dioxide/activated carbon composite as a high-performance electrode material for capacitive deionization10.1021/acssuschemeng.6b00974 ↗
11. Carbon–tio2 composites as high-performance supercapacitor electrodes: synergistic effect between carbon and metal oxide phases10.1039/C7TA08023A ↗
12. One-step chemical vapor deposition synthesis and supercapacitor performance of nitrogen-doped porous carbon–carbon nanotube hybrids10.3762/bjnano.8.267 ↗
13. Assessing the environmental impact of atomic layer deposition (ALD) processes and pathways to lower it10.1021/acsmaterialsau.3c00002 ↗
14. Suntola · 1977
15. Electrode surface engineering by atomic layer deposition: a promising pathway toward better energy storage10.1016/j.nantod.2016.04.004 ↗
16. Atomic layer deposition in the development of supercapacitor and lithium-ion battery devices10.1016/j.carbon.2021.03.041 ↗
17. Atomic layer Deposition—A versatile toolbox for designing/engineering electrodes for advanced supercapacitors10.1002/advs.202303055 ↗
18. Electrochemical properties of tio2 electrode prepared by various methods10.1016/j.proeng.2012.07.450 ↗
19. Genotoxicity assessment of titanium dioxide nanoparticle accumulation of 90 days in the liver of GPT Delta transgenic mice
20. A weight of evidence review of the genotoxicity of titanium dioxide (tio2)10.1016/j.yrtph.2022.105263 ↗
21. Pseudocapacitive contributions to electrochemical energy storage in tio2 (anatase) nanoparticles10.1021/jp074464w ↗
22. Templated nanocrystal-based porous tio2 films for next-generation electrochemical capacitors10.1021/ja8057309 ↗
23. Impact of different intermediate layers on the morphology and crystallinity of tio2 grown on carbon nanotubes by atomic layer deposition10.1002/admi.202100759 ↗
24. Commonalities of atomic layer deposition of oxide coatings on activated carbons for 3.5 V electric double layer supercapacitors10.3389/fenrg.2020.596062 ↗
25. Realizing high-voltage and Ultralong-life supercapacitors by a universal interfacial engineering strategy10.1016/j.jpowsour.2021.230406 ↗
26. Comparison of three titanium-precursors for atomic-layer-deposited tio2 for passivating contacts on silicon10.1116/6.0003309 ↗
27. Zhong
28. Atomic layer deposition of tio2on graphene for supercapacitors10.1149/2.025204jes ↗
29. Pseudocapacitance of amorphous tio2 thin films anchored to graphene and carbon nanotubes using atomic layer deposition10.1021/jp4066955 ↗
30. Atomic layer deposition of titanium oxide for pseudocapacitive functionalization of vertically-aligned carbon nanotube supercapacitor electrodes10.1149/2.0141502jss ↗
31. Growth of titanium dioxide thin films by atomic layer epitaxy10.1016/0040-6090(93)90172-L ↗
32. Fixed electric double layer capacitors for use in electronic equipment. Part I: generic specification
33. Plasma-assisted atomic layer deposition: basics, opportunities, and challenges10.1116/1.3609974 ↗
34. An improved exponential model for charge and discharge behavior of printed supercapacitor modules under varying load conditions10.1016/j.jpowsour.2022.231475 ↗
35. Geordnete strukturen in „amorphem“ polyäthylenterephthalat
36. Polyimide in electronics: applications and processability overview
37. Effect of mechanical properties on processing behavior and electrochemical performance of aqueous processed graphite anodes for lithium-ion batteries10.1016/j.jpowsour.2023.233996 ↗
38. TA Instruments - Materials Science Solutions. Thermal analysis and rheology of anodes. TGA Thermal. Stability. Compositio. Amount of anode Mater.. Available at: https://www.tainstruments.com/applications/battery-material-testing/anode/.
39. Remarkable wettability of highly dispersive RGO ink on multiple substrates independent of deposition techniques10.1016/j.flatc.2019.100110 ↗
40. Chapter 4. Raman, IR and INS characterization of functionalized carbon materials10.1039/9781788013116-00103 ↗
41. A hybrid nanoparticle/alkoxide ink for inkjet printing of Tio2: a templating effect to form anatase at 200 °C10.1039/C9RA06119C ↗
42. Enhanced photovoltaic performance of inverted hybrid bulk-heterojunction solar cells using tio 2/reduced graphene oxide films as electron transport layers10.1117/1.JPE.5.057408 ↗
43. Graphene-mwnts composite coatings with enhanced electrical conductivity10.1016/j.flatc.2017.06.011 ↗
44. Bio-inspired 3D-printed supercapacitors for sustainable energy storage10.1016/j.jpowsour.2024.235529 ↗
45. Coconut-based activated carbon fibers for efficient adsorption of various organic dyes10.1039/C8RA08990F ↗
46. Robust polymer nanocomposite membranes incorporating discrete tio2 nanotubes for water treatment10.3390/nano9091186 ↗
47. Physisorption of gases, with special reference to the evaluation of surface area and pore size distribution (IUPAC technical report)10.1515/pac-2014-1117 ↗
48. Adsorption and desorption of flavonoids on activated carbon impregnated with different metal ions10.1039/D3RA03476C ↗
49. Sustainable materials for electrochemical capacitors10.1016/j.mattod.2018.03.005 ↗
50. Synthesis of nacl single crystals with defined morphologies as templates for fabricating hollow nano/micro-structures10.1039/C4RA15385E ↗
51. Effects of oxygen-containing functional groups on carbon materials in supercapacitors: a review10.1016/j.matdes.2023.111952 ↗
52. Towards high-energy-density supercapacitors via less-defects activated carbon from sawdust10.1016/j.electacta.2020.137152 ↗
53. Electrocatalytic water oxidation: an overview with an example of translation from lab to market10.3389/fchem.2022.861604 ↗
54. Wang · 2023
55. Surface-redox sodium-ion storage in anatase titanium oxide
56. Amorphous tio2/c frameworks as intercalation pseudocapacitance anodes for fast and durable sodium storage10.1021/acs.energyfuels.0c02820 ↗
57. Intercalation pseudocapacitance of amorphous titanium dioxide@nanoporous graphene for high-rate and large-capacity energy storage10.1016/j.nanoen.2018.04.063 ↗
58. Evidence for fast lithium-ion diffusion and charge-transfer reactions in amorphous tiox nanotubes: insights for high-rate electrochemical energy storage10.1021/acsami.8b16994 ↗
59. True meaning of pseudocapacitors and their performance metrics: asymmetric versus hybrid supercapacitors10.1002/smll.202002806 ↗
60. Multidimensional materials and device architectures for future hybrid energy storage10.1038/ncomms12647 ↗